Engineering topics

Riggins, David

Publications and source records attributed to Riggins, David.

4 records

NASA NTRS2006

Thermodynamic Analysis of Dual-Mode Scramjet Engine Operation and Performance

Recent analytical advances in understanding the performance continuum (the thermodynamic spectrum) for air-breathing engines based on fundamental second-law considerations have clarified scramjet and ramjet operation, performance, and characteristics. Second-law based analysis is extended specifically in this work to clarify and describe the performance characteristics for dual-mode scramjet operation in the mid-speed range of flight Mach 4 to 7. This is done by a fundamental investigation of the complex but predictable interplay between heat release and irreversibilities in such an engine; results demonstrate the flow and performance character of the dual mode regime and of dual mode transition behavior. Both analytical and computational (multi-dimensional CFD) studies of sample dual-mode flow-fields are performed in order to demonstrate the second-law capability and performance and operability issues. The impact of the dual-mode regime is found to be characterized by decreasing overall irreversibility with increasing heat release, within the operability limits of the system.

Riggins, David↗

NASA NTRS1998

The Numerical Investigation of a Dual-Mode Scramjet Combustor

A numerical investigation of a multiple-jet array dual-mode scramjet combustor has been performed utilizing a three-dimensional Navier-Stokes code with finite-rate chemistry. Results indicate substantial upstream interaction in the form of an oblique shock/expansion train upstream of the combustor, culminating in completely subsonic flow in the vicinity of fuel injectors. The flow returns to supersonic velocities in the downstream (diverging) portion of the combustor. Mixing and combustion are rapid in this flow and predicted combustion efficiency closely matches experimental data. However, comparisons of wall pressure between the simulation and the experiment show i) substantial underprediction of the upstream interaction distance and ii) moderate overprediction of peak pressure in the vicinity of the entrance of the combustor. This can be at least partially explained by examination of available experimental data; this data shows a very significant movement of the entering vitiated airflow to the sides of the combustor (around the injector array and the upstream interaction front as a whole). This important effect is currently being examined by an extension of the modeling to include the entire half-duct of the same combustor geometry.

Riggins, David↗

NASA NTRS1993

The computation of supersonic combustor flows using multi-computers

An explicit CFD computer code with parallel processing is developed for the purpose of simulating internal high-speed reacting flows. The code solves the 3D Navier-Stokes equations for compressible flows. Preliminary results indicate that parallel processing should solve the resource and speed shortages presently encountered with sequential computers for problems of interest.

Underwood, Mark↗

NASA NTRS1988

The use of direct solvers for compressible flow computations

The feasibility of using a vectorized direct solver for the compressible Euler and Navier-Stokes equations is examined for both single-grid and multi-grid strategies. A procedure is developed for comparing the computational effort required for the direct method with that of the vertical line Gauss-Seidel iteration scheme in order to provide a criteria for choosing between the two techniques. The direct method is shown to have a relatively wide range of application on a vector processor with large memory. Results for both inviscid and viscous test problems in two-dimensions are examined.

Riggins, David↗