Engineering topics

Ried, R. C.

Publications and source records attributed to Ried, R. C..

11 records

NASA NTRS1988

Space transportation - Options and opportunities

The development space transportation options to earth orbit and beyond are summarized. The performance of available launch systems is reviewed, including the Scout, Delta, Long March 3, Atlas Centaur, Ariane 3, Titan 34D, Proton, the Japanese M-3S-II, N-1, and H-1, and the Space Shuttle. Launch vehicle which are planned or are under development are examined, including the Conestoga, Industrial Launch Vehicle, Titan II, Delta II, H-II, Ariane 5, Titan IV, and the NASA/DOD Heavy Lift Launch Vehicle. Also, issues pertinent to the development of space transportation vehicles are considered, such as reliability, reduced unit cost, reduced lead time, and improved payload accommodations.

Loftus, J. P., Jr.↗

NASA NTRS1986

Orbital-Transfer Vehicle With Aerodynamic Braking

Vehicle includes airbrake for deceleration into lower orbit. Report describes vehicle for carrying payloads between low and high orbits around Earth. Vehicle uses thin, upper atmosphere for braking when returning to low orbit. Since less propellant needed than required for full retrorocket braking, vehicle carries larger payload and therefore reduces cost of space transportation.

Scott, C. D.↗

NASA NTRS1985

Orbiter entry aerothermodynamics

The challenge in the definition of the entry aerothermodynamic environment arising from the challenge of a reliable and reusable Orbiter is reviewed in light of the existing technology. Select problems pertinent to the orbiter development are discussed with reference to comprehensive treatments. These problems include boundary layer transition, leeward-side heating, shock/shock interaction scaling, tile gap heating, and nonequilibrium effects such as surface catalysis. Sample measurements obtained from test flights of the Orbiter are presented with comparison to preflight expectations. Numerical and wind tunnel simulations gave efficient information for defining the entry environment and an adequate level of preflight confidence. The high quality flight data provide an opportunity to refine the operational capability of the orbiter and serve as a benchmark both for the development of aerothermodynamic technology and for use in meeting future entry heating challenges.

Ried, R. C.↗

NASA NTRS1984

An AOTV aeroheating and thermal protection study

The aerothermodynamics and thermal protection of aerobraking orbital transfer vehicles are studied with a view toward design methodology and technology requirements. A particular class of geometries is investigated: the ellipsoidally blunted raked-off elliptic cone. Discussed are the influence of various geometrical parameters on the trajectory and the heat flux as well as heating prediction methods ranging from an engineering correlation formula to computational solutions of the Navier-Stokes equations. Finite-rate catalytic thermal protection materials and gas radiation are considered. Estimates of the specific mass of possible thermal protection systems indicate that support structure is a large contributor to the aerobrake mass as compared with the thermal protection insulation itself. Sizing curves are included which enable the designer to estimate the size aerobrake required from heating considerations for different mass vehicles having aerobrakes of several specific masses.

Scott, C. D.↗

NASA NTRS1983

Control structure interactions in large space structures Analysis using energy approach

A simple energy approach to study the problem of control structure interactions in large space structures is presented. For the illustrative cases of free-free beam and free rectangular plate, the vibrational energy imparted during operation of constant and pulsed thrusters is found in a nondimensional form. Then based on a parametric study, suggestions are made on the choice of the thruster location and parameters to minimize the control structure interactions.

Shrivastava, S. K.↗

NASA NTRS1982

Space Shuttle orbiter entry heating and TPS response: STS-1 predictions and flight data

Aerothermodynamic development flight test data from the first orbital flight test of the Space Transportation System (STS) transmitted after entry blackout is given. Engineering predictions of boundary layer transition and numerical simulations of the orbiter flow field were confirmed. The data tended to substantiate preflight predictions of surface catalysis phenomena. The thermal response of the thermal protection system was as expected. The only exception is that internal free convection was found to be significant in limiting the peak temperature of the structure in areas which do not have internal insulation.

Ried, R. C.↗

NASA NTRS1980

Achievable flatness in a large microwave power transmitting antenna

A dual reference SPS system with pseudoisotropic graphite composite as a representative dimensionally stable composite was studied. The loads, accelerations, thermal environments, temperatures and distortions were calculated for a variety of operational SPS conditions along with statistical considerations of material properties, manufacturing tolerances, measurement accuracy and the resulting loss of sight (LOS) and local slope distributions. A LOS error and a subarray rms slope error of two arc minutes can be achieved with a passive system. Results show that existing materials measurement, manufacturing, assembly and alignment techniques can be used to build the microwave power transmission system antenna structure. Manufacturing tolerance can be critical to rms slope error. The slope error budget can be met with a passive system. Structural joints without free play are essential in the assembly of the large truss structure. Variations in material properties, particularly for coefficient of thermal expansion from part to part, is more significant than actual value.

Ried, R. C.↗

NASA NTRS1980

SPS structures and control: A perspective

The characteristics and design requirements for the structure and control systems for a solar power satellite were evaluated. A simplistic, indicative analysis on a representative configuration was developed. Representative configuration masses and dimensions are given in convenient approximate magnitudes. The significance of structure control interaction and the significance of stiffness to the minimization of dynamic energy was demonstrated. It was found that the thermal environment for the SPS was dominated by solar radiation and waste heat rejection by the antenna. A more in-depth assessment of the control system design and associated system performance is still needed, specifically the inter-relatonships between control sensors, actuators, and structural response.

Ried, R. C.↗

NASA NTRS1980

SPS structural dynamics and control workshop: Findings and recommendations

The structural dynamics and control of the Solar Power Satellite (SPS), a concept which holds promise for meeting a portion of the energy needs of the United States beyond the year 2000 are examined. The assumptions, methodologies and conclusions of existing SPS studies in the areas of structural dynamics and control (with structural design and materials also being considered) are assessed.

Ried, R. C.↗

NASA NTRS1980

Control-structure interaction in a free beam

A simple energy approach to study the problem of control structure interactions in large space structures is presented. For the illustrative case of a free-free beam, the vibrational energy imparted during operation of constant, step, and pulsed thrusters is found in a nondimensional closed form. Then based on a parametric study, suggestions are made on the choice of parameters to minimize the control structure interactions. The study of this simple system provides physical insight and understanding for more complex systems.

Shrivastava, S. K.↗

NASA NTRS1963

Principles and application of shock-tubes and shock tunnels

The principles, theoretical flow equations, calculation techniques, limitations and practical performance characteristics of basic and high performance shock tubes and shock tunnels are presented. Selected operating curves are included.

Ried, R. C.↗