Engineering Papers⌕ Search

Engineering topics

Richardson, M.

Publications and source records attributed to Richardson, M..

11 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Electron density profile and associated fluctuation measurements using a microwave reflectometry diagnostic on Helically Symmetric eXperiment (HSX)

Abstract A dual-band frequency-modulated reflectometry is employed on the Helically Symmetric eXperiment (HSX) stellarator. This system equips a fast PIN switch to alternate the frequency source between two voltage-controlled oscillators, providing an operational frequency range from 14.5 GHz to 25.5 GHz. A monostatic antenna geometry and an ellipsoidal mirror are implemented in the vessel of HSX, where the polarization of the transmitted microwave can be switched between O- and X-mode to accommodate the magnetic field and plasma density. Although the original system was designed for density fluctuation measurement, significant efforts have been undertaken to improve the system performance and to realize the density profile inversion. Recent improvements of the system reported here include calibration of the dispersion in the transmission line, optimization of the waveform, and implementation of the Choi-Williams time–frequency distribution for spectral analysis. In this paper, we present the optimization of the reflectometry system along with first experimental measurements of the density profile and observations of fluctuations during gas puffing experiments.

Han, X. (ORCID:0000000184986433)↗
NASA NTRS2017

Meal Replacement Mass Reduction and Integration Acceptability Study

NASA, in planning for long-duration missions, has an imperative to provide a food system with the necessary nutrition, acceptability, and safety to ensure sustainment of crew health and performance. The Orion Multi-Purpose Crew Vehicle (MPCV) and future exploration missions are mass constrained; therefore the team is challenged to reduce the mass of the food system by 10% while maintaining product safety, nutrition, and acceptability. Commercially available products do not meet the nutritional requirements for a full meal replacement in the spaceflight food system, and it is currently unknown if daily meal replacements will impact crew food intake and psychosocial health over time. The purpose of this study was to develop a variety of nutritionally balanced breakfast replacement bars that meet spaceflight nutritional, microbiological, sensorial, and shelf-life requirements, while enabling a 10% savings in food mass. To date, six nutrient-dense meal replacement bars (approximately 700 calories per bar) have been developed, using traditional methods of compression as well as novel ultrasonic compression technologies developed by Creative Resonance Inc. (Phoenix, AZ). The four highest rated bars were evaluated in the Human Exploration Research Analog (HERA) to assess the frequency with which actual meal replacement options may be implemented. Specifically, overall impact of bars on mood, satiety, digestive discomfort, and satisfaction with food. These factors are currently being analyzed to inform successful implementation strategies where crew maintain adequate food intake. In addition, these bars are currently undergoing shelf-life testing to determine long-term sensory acceptability, nutritional stability, qualitative stability of analytical measurements (i.e. water activity and texture), and microbiological compliance over two years of storage at room temperature and potential temperature abuse conditions to predict long-term acceptability. It is expected that this work will enable a successful meal replacement strategy to be implemented that will maintain crew food consumption and health, while informing exploration missions with appropriate mass savings expectations.

Sirmons, T.↗
NASA NTRS2016

Meal Replacement Mass Reduction and Integration Acceptability Study

NASA, in planning for long duration missions, has an imperative to provide a food system with the necessary nutrition, acceptability, and safety to ensure sustainment of crew health and performance. The Orion Multi-Purpose Crew Vehicle (MPCV) and future exploration missions are mass constrained; therefore we are challenged to reduce the mass of the food system by 10% while maintaining safety, nutrition, and acceptability for exploration missions. Food bars have previously been used to supplement meals in the Skylab food system, indicating that regular consumption of bars will be acceptable. However, commercially available products do not meet the requirements for a full meal replacement in the spaceflight food system. The purpose of this task is to develop a variety of nutritionally balanced breakfast replacement bars, which meet spaceflight nutritional, microbiological, sensorial, and shelf-life requirements, while enabling a 10% food mass savings. To date, six nutrient-dense meal replacement bars have been developed, using both traditional methods of compression as well as novel ultrasonic compression technologies developed by Creative Resonance Inc. (Phoenix, AZ). All bars will be prioritized based on acceptability and the four top candidates will be evaluated in the Human Exploration Research Analog (HERA) to assess the frequency with which actual meal replacement options may be implemented. Specifically, overall impact to mood, satiety, dietary discomfort, and satisfaction with food will be analyzed to inform successful implementation strategies. In addition, these bars will be evaluated based on final product sensory acceptability, nutritional stability, qualitative stability of analytical measurements (i.e. water activity and texture), and microbiological compliance over two years of storage at room temperature and potential temperature abuse conditions to predict long-term acceptability. It is expected that this work will enable a successful meal replacement strategy to be implemented that maintains crew food consumption and health, while informing exploration missions with appropriate mass savings expectations.

Sirmons, T.↗
NASA NTRS2003

Themis Visible Imaging of the South Polar Layered Deposits, Martian Southern Spring, 2003

The polar layered deposits (PLD) of Mars have attracted considerable attention since their identification in Mariner 9 images, largely due to the possibility that these finely layered, volatile-rich deposits hold a record of recent eras in Martian climate history. The PLD have been a target of imaging and other sensors in the last several decades, but only recently has it been possible to obtain a moderately high resolution image map, using the visible sensor on 2001 Mars Odyssey's Thermal Emission Imaging System (THEMIS). We report here on the acquisition of a 36 meter/pixel contiguous single-band visible image data set of the south polar layered deposits (SPLD), obtained during early southern spring in 2003. The data will undoubtedly be applied to many problems in Mars polar studies.

Mariner 9↗
NASA NTRS2003

Scientific Benefit of a Mars Dust Sample Capture and Earth Return with SCIM

The Sample Collection for Investigation of Mars (SCIM) mission, presently a finalist for flight as a Mars Scout, proposes to return martian atmospheric dust to Earth for mineralogical, chemical, isotopic, and other studies. The returned sample will consist of least 1000 martian dust particles =10 m in diameter plus millions of smaller particles. Here we discuss the science gained from analyzing such a sample in terrestrial laboratories. An accompanying abstract discusses the SCIM atmosphere sample return science.

Leshin, L. A.↗
NASA NTRS2003

THEMIS Visible Imaging of the South Polar Layered Deposits, Martian Southern Spring, 2003

The polar layered deposits (PLD) of Mars have attracted considerable attention since their identification in Mariner 9 images, largely due to the possibility that these finely layered, volatile-rich deposits hold a record of recent eras in Martian climate history. The PLD have been a target of imaging and other sensors in the last several decades, but only recently has it been possible to obtain a moderately high resolution image map, using the visible sensor on 2001 Mars Odyssey s Thermal Emission Imaging System (THEMIS). We report here on the acquisition of a 36 meter/pixel contiguous single-band visible image data set of the south polar layered deposits (SPLD), obtained during early southern spring in 2003. The data will undoubtedly be applied to many problems in Mars polar studies. We will discuss here, and in more detail at the Conference, the use of these images to further characterize the population of impact craters on the SPLD, and the implications of the observed population for the age and evolution of the SPLD.

Plaut, J. J.↗
NASA NTRS1985

Evidence for gain on the C VI 182 A transition in a radiation-cooled selenium/Formvar plasma

Thin plastic foils coated with selenium have been irradiated using from 4 to 8 beams of the OMEGA laser in a line focus configuration. Spectra were recorded using a 3 meter spectrograph that viewed the plasma along the line focus. Based on a comparison of the intensities of the spectral lines from plasmas with lengths of 1.7, 3.4, 6.8, and 13.6 mm, the C VI n = 3 to 2 transition at 182 A was anomalously intense in the spectra from the longer plasmas. Calculations indicate that the carbon plasma was cooled by radiation from the highly-charged selenium plasma in a time that was smaller than the expansion time of the plasma. These plasma conditions are favorable for the occurrence of population inversions between the n = 2 and 3 levels of C VI resulting from recombination and cascading from higher levels. The measured gain coefficient for the C VI 182 A transition is 3/cm, and this corresponds to a gain-length product of 4 in the longest plasma.

Seely, J. F.↗
NASA NTRS1985

Transitions of the type 2s-2p in highly ionized Cu, Zn, Ga, and Ge

Transitions of the type 2s-2p in the F I, O I, N I, and C I isoelectronic sequences of copper, zinc, gallium, and germanium have been identified in the spectra from plasmas produced by the Omega laser system at the University of Rochester. The wavelengths are in the range 50 to 112 A and are measured using silicon and oxygen lines as wavelength standards for gallium and using several lines from the F I, O I, and Na I isoelectronic sequences as wavelength standards for copper, zinc, and germanium. The energy levels that are determined from the measured wavelengths are also presented. Based on these measurements, the wavelengths for a number of magnetic-dipole transitions within the ground configurations of the F I, O I, and N I isoelectronic sequences are predicted.

Behring, W. E.↗
NASA NTRS1978

Design and performance of a modularized NaI/Tl/ detector /The Crystal Ball prototype/

A prototype NaI(Tl) detector (the Cluster of 54) of spherical geometry subtending a solid angle of 7.5% of 4pi at its center, has recently been assembled and tested. This detector consists of 54 close-packed but optically isolated NaI(Tl) modules and the associated electronic circuitry. The Cluster of 54 is the predecessor of an almost complete spherical detector, the Crystal Ball, which will cover 94% of 4pi. The latter detector is now under construction and is especially designed for the study of gamma-rays produced in electron-positron collisions at colliding beam facilities. This article outlines the mechanical, optical, and electronic assembly of the prototype system.

Chan, Y.↗