Engineering Papers⌕ Search

Engineering topics

Richards, J. A.

Publications and source records attributed to Richards, J. A..

8 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

Lossless compression of AVIRIS data: Comparison of methods and instrument constraints

A family of lossless compression methods, allowing exact image reconstruction, are evaluated for compressing Airborne Visible/Infrared Imaging Spectrometers (AVIRIS) image data. The methods are used on Differential Pulse Code Modulation (DPCM). The compressed data have an entropy of order 6 bits/pixel. A theoretical model indicates that significantly better lossless compression is unlikely to be achieved because of limits caused by the noise in the AVIRIS channels. AVIRIS data differ from data produced by other visible/near-infrared sensors, such as LANDSAT-TM or SPOT, in several ways. Firstly, the data are recorded at a greater resolution (12 bits, though packed into 16-bit words). Secondly, the spectral channels are relatively narrow and provide continuous coverage of the spectrum so that the data in adjacent channels are generally highly correlated. Thirdly, the noise characteristics of the AVIRIS are defined by the channels' Noise Equivalent Radiances (NER's), and these NER's show that, at some wavelengths, the least significant 5 or 6 bits of data are essentially noise.

Roger, R. E.↗
NASA NTRS1986

Radar signature determination: Trends and limitations

Modelling studies, as means for assessing what could be called radar signatures, are a part of two radar remote sensing research programs with which the author is affiliated. First, at the University of New South Wales, assessment of SIR-B data is being undertaken for a number of purposes including its value in arid land geomorphological and geological studies, forest and crop assessment, and mapping. A number of early results have been reported, however modelling aspects are still at an early stage. Secondly, the author recently spent 6 months working on SIR-B invertible forest canopy modelling in the Department of Geography at the University of California, Santa Barbara. Results from this work are outlined.

Richards, J. A.↗
NASA NTRS1984

Australian Multiexperimental Assessment of SIR-B (AMAS)

The utility of SIR-B data for analysis of surface properties and subsurface morphology in three arid regions of Australia is investigated. This study area is located in western New South Wales. It contains extensive aeolian and alluvially derived depositional plains and is the site of the University's Arid Zone Research Station; it is well-mapped and surveyed. Radar backscatter is mapped and evaluated against known terrain conditions. Relative components of surface and subsurface return are determined with a view to identifying structural properties of surface and subsurface morphology. The capability of microwave remote sensing in locating likely groundwater sources in the Bancannia Basin, near Fowler's Gap is assessed.

Richards, J. A.↗
NASA NTRS1982

A means for utilizing ancillary information in multispectral classification

Attention is given to a method which makes it possible to incorporate information from ancillary data sources into the results of an existing classification of remotely sensed data. The method is based upon probabilistic label relaxation procedures which are used for imbedding spatial context data in image-labeling problems. The source of ancillary information is utilized in the form of a set of probabilities. These are introduced into a modified relaxation method called supervised relaxation labeling which, on application, develops a labeling for remotely sensed data that strikes a balance in consistency between spectral, spatial, and ancillary data sources of information. A description is given of results of a forestry classification in which accuracy is improved from 68% to 81% by incorporating topographic elevation in the outlined manner.

Richards, J. A.↗
NASA NTRS1981

On the accuracy of pixel relaxation labeling

An analysis of pixel labeling by probabilistic relaxation techniques is presented to demonstrate that these labeling procedures degenerate to weighted averages in the vicinity of fixed points. A consequence of this is that undesired label conversions can occur, leading to a deterioration of labeling accuracy at a stage after an improvement has already been achieved. Means for overcoming the accuracy deterioration are suggested and used as the basis for a possible design strategy for using probabilistic relaxation procedures. The results obtained are illustrated using simple data sets in which labeling on individual pixels can be examined and also using Landsat imagery to show application to data typical of that encountered in remote sensing applications.

Richards, J. A.↗
NASA NTRS1981

Pixel labeling by supervised probabilistic relaxation

A simple modification to existing probabilistic relaxation procedures is suggested which allows the information contained in initial labels to exert an influence on the direction of relaxation throughout the process. In this manner, the initial labels assume more importance than with conventional algorithms and are used in combination with the outcome of relaxation at each iteration to produce a cooperative estimate of the correct label for a particular object. Pixel labeling examples are presented which show the performance that can be obtained with the modified algorithm. The procedure is readily generalized to allow other data to influence the process.

Richards, J. A.↗