Engineering Papers⌕ Search

Engineering topics

Richard, F.

Publications and source records attributed to Richard, F..

Design, construction and commissioning of a technological prototype of a highly granular SiPM-on-tile scintillator-steel hadronic calorimeter

The CALICE collaboration is developing highly granular electromagnetic and hadronic calorimeters for detectors at future energy frontier electron-positron colliders. After successful tests of a physics prototype, a technological prototype of the Analog Hadron Calorimeter has been built, based on a design and construction techniques scalable to a collider detector. The prototype consists of a steel absorber structure and active layers of small scintillator tiles that are individually read out by directly coupled SiPMs. Each layer has an active area of 72 × 72 cm^2 and a tile size of 3 × 3 cm^2. With 38 active layers, the prototype has nearly 22,000 readout channels, and its total thickness amounts to 4.4 nuclear interaction lengths. The dedicated readout electronics provide time stamping of each hit with an expected resolution of about 1 ns. The prototype was constructed in 2017 and commissioned in beam tests at DESY. It recorded muons, hadron showers and electron showers at different energies in test beams at CERN in 2018. In this paper, the design of the prototype, its construction and commissioning are described. The methods used to calibrate the detector are detailed, and the performance achieved in terms of uniformity and stability is presented.

47 OTHER INSTRUMENTATION↗

Construction and response of a highly granular scintillator-based electromagnetic calorimeter

Here, a highly granular electromagnetic calorimeter with scintillator strip readout is being developed for future linear collider experiments. A prototype of 21.5 X 0 depth and 180 × 180 mm 2 transverse dimensions was constructed, consisting of 2160 individually read out 10 × 45 × 3 mm 3 scintillator strips. This prototype was tested using electrons of 2–32 Ge V at the Fermilab Test Beam Facility in 2009. Deviations from linear energy response were less than 1.1%, and the intrinsic energy resolution was determined to be ( 12 . 5 ± 0 . 1 ( stat. ) ± 0 . 4 ( syst. ) ) % / E [ Ge V ] ⊕ ( 1 . 2 ± 0 . 1 ( stat. ) - 0 . 7 + 0 . 6 ( syst. ) ) % , where the uncertainties correspond to statistical and systematic sources, respectively.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Improvements Realized on the NiThrow{sup TM} Solution - 13075

Two years ago we presented the first results obtained with the highly pressurized liquid nitrogen technology (HPLN) in case of cutting, surface decontamination and concrete scabbling applications. These results, carried out in non active conditions, were really promising in term of efficiency and productivity and highlighted how this technology was interesting for D and D business (e.g. cut of depth up to 30 mm for concrete scabbling application; productivity of 4 cm.min{sup -1} in case of the cut of a 50 mm thick stainless steel ingot..). We also found some real issues which were not compatible with its use in a radioactive environment. Indeed, the reliability of some parts of the system was not efficient enough (e.g. lancing tool, intensifiers...) to run the HPLN technology in good conditions. More than two years, after a complete study of the whole system, and after the compilation of all the required troubleshooting, AREVA with its partner Air Liquide, decided to start a complete R and D work in order to improve this cryogenic technology. Our engineers started with the lancing tool and designed a new one lighter and more reliable than the original one. After that, they improved the reliability of the pressurization unit (skid) by changing seals and other parts. As mentioned above, the goal of this work was to implement this technology in a nuclear environment the best way. We also focused our efforts on the insulation of the high pressure hoses (with a maximal distance, between the 'skid - Heat exchanger' module and the lancing tool, of about 110 meters), and on the development of a quite efficient vacuum system comprising dust collection units (we can guarantee an efficiency of our system higher than 95%). Finally, the last step of our development was devoted to the design and the manufacturing of a dedicated carrier enabling the technology to move in all directions (X,Y and Z) and to reach all the positions (wall, ground, ceiling and for sure all the singularities such as corners..). In this paper, the 'step by step' strategy to achieve those ambitious developments will be presented with a special attention to the NiThrow{sup TM} carrier development. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Future Colliders

Future Collider projects and long term planning of particle physics projects.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Terrain modelling and motion planning for an autonomous exploration rover

To assess the feasibility of planetary exploration missions using rovers, the French national agency CNES, with a consortium of European laboratories and industrial concerns, has initiated the Eureka project, 'Illustration of an Autonomous Robot for the Exploration of Space' (IARES). IARES is a demonstrator composed of a rover and a ground station, linked by telemetry and telecommand. It is aimed at verifying, on earth, robotic concepts developed by the RISP group of French laboratories (LAAS, INRIA, CERT, LETI) to perform scientific missions such as autonomous terrain sample collecting over large areas. To cope with the actual needs of planet exploration, IARES suitability is assessed through constraints on limited bandwidth, time delay and on-board resources. This autonomy relies heavily on robust onboard trajectory generation capabilities. This paper presents the main functions of the IARES navigation sub-system and shows how they are combined to allow movement in Mars-like environments. Section 2 gives an overall description of the IARES system. Section 3 details the functions of the Navigation sub-system, and finally, section 4 illustrates with a simple example the use of these functions.

Richard, F.↗