Engineering Papers⌕ Search

Engineering topics

Rice, W. J.

Publications and source records attributed to Rice, W. J..

13 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

Real time pressure signal system for a rotary engine

A real-time IMEP signal which is a composite of those produced in any one chamber of a three-lobed rotary engine is developed by processing the signals of four transducers positioned in a Wankel engine housing such that the rotor overlaps two of the transducers for a brief period during each cycle. During the overlap period of any two transducers, their output is compared and sampled for 10 microseconds per 0.18 degree of rotation by a sampling switch and capacitive circuit. When the switch is closed, the instantaneous difference between the value of the transducer signals is provided while with the switch open the average difference is produced. This combined signal, along with the original signal of the second transducer, is fed through a multiplexer to a pressure output terminal. Timing circuits, controlled by a crank angle encoder on the engine, determine which compared transducer signals are applied to the output terminal and when, as well as the open and closed periods of the switches.

Rice, W. J.↗
NASA NTRS1983

Multicomponent velocity measurement in a pison-cylinder configuration using laser velocimetry

Because of its nonintrusive nature, Laser Doppler Velocimetry (LDV) has become a popular tool for velocity measurements in internal combustion engines. This work shows how one can use an on-axis measurement technique, in conjunction with the standard two channel LDV technique, to make simultaneous three-component measurements using a single focusing lens. Simultaneous measurement of two of these three components in a piston-cylinder configuration is demonstrated.

Schock, H. J.↗
NASA NTRS1982

Modular Engine Instrumentation System

System that provides information and measurements never obtained before in real time has been developed. System shows not only real-time measurements but also results of computations of key combustion parameters in meaningful and easily understood display. Standard commercially-available shaft encoder plus data from pressure transducer act as principal drivers to device. Eventually, modular system could be developed into onboard controller for automobile engines.

Rice, W. J.↗
NASA NTRS1982

Preliminary results on performance testing of a turbocharged rotary combustion engine

The performance of a turbocharged rotary engine at power levels above 75 kW (100 hp) was studied. A twin rotor turbocharged Mazda engine was tested at speeds of 3000 to 6000 rpm and boost pressures to 7 psi. The NASA developed combustion diagnostic instrumentation was used to quantify indicated and pumping mean effect pressures, peak pressure, and face to face variability on a cycle by cycle basis. Results of this testing showed that a 5900 rpm a 36 percent increase in power was obtained by operating the engine in the turbocharged configuration. When operating with lean carburetor jets at 105 hp (78.3 kW) and 4000 rpm, a brake specific fuel consumption of 0.45 lbm/lb-hr was measured.

Meng, P. R.↗
NASA NTRS1981

Experimental analysis of IMEP in a rotary combustion engine

This experimental work demonstrates the use of a NASA designed, real time Indicated Mean Effective Pressure (IMEP) measurement system which will be used to judge proposed improvements in cycle efficiency of a rotary combustion engine. This is the first self-contained instrument that is capable of making real time measurements of IMEP in a rotary engine. Previous methods used require data recording and later processing using a digital computer. The unique features of this instrumentation include its ability to measure IMEP on a cycle by cycle, real time basis and the elimination of the need to differentiate the volume function in real time. Measurements at two engine speeds (2000 and 3000 RPM) and a full range of loads are presented, although the instrument was designed to operate to speeds of 9000 RPM.

Schock, H. J.↗
NASA NTRS1981

Experimental analysis of IMEP in a rotary combustion engine

A real time indicated mean effective pressure measurement system is described which is used to judge proposed improvements in cycle efficiency of a rotary combustion engine. This is the first self-contained instrument that is capable of making real time measurements of IMEP in a rotary engine. Previous methods used require data recording and later processing using a digital computer. The unique features of this instrumentation include its ability to measure IMEP on a cycle by cycle, real time basis and the elimination of the need to differentiate volume function in real time. Measurements at two engine speeds (2000 and 3000 rpm) and a full range of loads are presented, although the instrument was designed to operate to speeds of 9000 rpm.

Schock, H. J.↗
NASA NTRS1980

Modular instrumentation system for real-time measurements and control on reciprocating engines

An instrumentation system was developed for reciprocating engines. Among the parameters measured are the indicated mean effective pressure, or theoretical work per cycle, and the mass fraction burn rate, a measure of the combustion rate in the cylinder. These computations are performed from measured cylinder pressure and crankshaft angle and are available in real time for the experimenter. A 100 or 200 consecutive-cycle sample is analyzed to reduce the effect of cyclic variations in the engine. Data are displayed in bargraph form, and the mean and standard deviation are computed. Other instruments are also described.

Rice, W. J.↗
NASA NTRS1979

Real-time instrument averages 100 data sets

Instrument generates average curve of 100 consecutive cycles of any function that occurs as time varying electrical signal. Device has been used to average parameters on 1975 Chevrolet V-8 engine, and on Continental six cylinder aircraft engine.

Birchenough, A. G.↗
NASA NTRS1978

Fast differential analog-to-digital conversion

Technique first digitizes difference between input and previous conversion. Digitized difference is added to previous digitized value to yield new digital representation of analog input. Output of analog-to-digital converter is useful as digital derivative of input signal.

Birchenough, A. G.↗
NASA NTRS1978

Indicated mean-effective pressure instrument

An apparatus for measuring indicated mean effective pressure (IMEP) of an internal combustion piston or rotary engine or of an external combustion engine such as a stirling engine is disclosed. An optical shaft encoder measures crankshaft angle of the engine. Changes in volume with respect to changes in crank angle of one or more cylinders (dV/d theta) is determined either empirically or algebraically from engine geometry and stored in a memory. As the crank angle changes, dV/d theta) is read from the memory and multiplied by chamber or cylinder pressure. The product (P dv/d theta) is then added to the total previously accumulated in the cycle. Each time theta changes by an amount equal to delta theta, the process is repeated. At the end of each engine cycle, the total is equal to the IMEP value for that cycle.

Rice, W. J.↗
NASA NTRS1977

Instrument to average 100 data sets

An instrumentation system is currently under development which will measure many of the important parameters associated with the operation of an internal combustion engine. Some of these parameters include mass-fraction burn rate, ignition energy, and the indicated mean effective pressure. One of the characteristics of an internal combustion engine is the cycle-to-cycle variation of these parameters. A curve-averaging instrument has been produced which will generate the average curve, over 100 cycles, of any engine parameter. the average curve is described by 2048 discrete points which are displayed on an oscilloscope screen to facilitate recording and is available in real time. Input can be any parameter which is expressed as a + or - 10-volt signal. Operation of the curve-averaging instrument is defined between 100 and 6000 rpm. Provisions have also been made for averaging as many as four parameters simultaneously, with a subsequent decrease in resolution. This provides the means to correlate and perhaps interrelate the phenomena occurring in an internal combustion engine. This instrument has been used successfully on a 1975 Chevrolet V8 engine, and on a Continental 6-cylinder aircraft engine. While this instrument was designed for use on an internal combustion engine, with some modification it can be used to average any cyclically varying waveform.

Tuma, G. B.↗
NASA NTRS1977

Indicated mean-effective pressure instrument

Device is capable of measuring and calculating IMEP of internal combustion engines in real time. Apparatus is used to provide mass flow measurements in engine cylinder and in measurement of release energy of nonlinear spring.

Rice, W. J.↗