Rhodes, Mark A. | Engineering Papers

DOE OSTI2024

Riveted assemblies and methods for riveting components

Riveted assemblies are provided that can include: a first component having opposing first and second sidewalls; a second component having opposing third and fourth sidewalls, wherein the second sidewall of the first component abuts the third sidewall of the second component to bind and form an affixing interface comprising the second and third sidewall between the first component to the second component; and a rivet extending between a head along a shank to an end, the rivet piercing the first sidewall with the end of the rivet being between the first and fourth sidewalls. Methods for affixing at least two components using a rivet are also provided. The methods can include: providing a first component having opposing first and second sidewalls; providing a second component having opposing third and fourth sidewalls; abutting the second sidewall of the first component to the third sidewall of the second component; providing a rivet extending between a head along a shank to an end; projecting the rivet through at least the first sidewall of the first component to form an affixing interface comprising the second and third sidewalls.

Joshi, Vineet V.↗

DOE OSTI2022

Riveted assemblies and methods for riveting components

Riveted assemblies are provided that can include: a first component having opposing first and second sidewalls; a second component having opposing third and fourth sidewalls, wherein the second sidewall of the first component abuts the third sidewall of the second component to bind and form an affixing interface comprising the second and third sidewall between the first component to the second component; and a rivet extending between a head along a shank to an end, the rivet piercing the first sidewall with the end of the rivet being between the first and fourth sidewalls. Methods for affixing at least two components using a rivet are also provided. The methods can include: providing a first component having opposing first and second sidewalls; providing a second component having opposing third and fourth sidewalls; abutting the second sidewall of the first component to the third sidewall of the second component; providing a rivet extending between a head along a shank to an end; projecting the rivet through at least the first sidewall of the first component to form an affixing interface comprising the second and third sidewalls.

Joshi, Vineet V.↗

DOE OSTI2021

Hot rolling of ZK60 magnesium sheet with isotropic tensile properties from tubing made by Shear Assisted Processing and Extrusion (ShAPE)

In order to evaluate the viability of ShAPE processed Mg alloys as a feedstock for fabricating lightweight sheet material, tubes consisting of ShAPE-extruded Mg alloy ZK60 were flattened into plates and hot rolled at 450 °C to reductions of 37%, 68%, and 93%. The mechanical properties and microstructure of the rolled material were characterized through tensile testing and electron backscattered diffraction (EBSD). ZK60 specimens rolled to 68% reduction had tensile properties similar to published properties of rolled ZK60 sheets fabricated using conventional processes, and exhibited negligible tensile anisotropy referenced to the rolling direction. Additional rolling from 68% to 93% reduced the ultimate tensile stress in the rolling direction from 341.74±5.96 MPa to 260.76±22.4MPa. The yield stress and elongation to failure of the material also decreased from 292.16±1.11 MPa to 256.93±18.4 MPa and 6.95±1.94% to 3.38±0.51%, respectively, but negligible little anisotropy was observed with respect to loading direction. EBSD mapping indicated that the as-extruded ZK60 had texture rotated away from the basal direction which developed into a strong basal texture over numerous hot rolling steps. This evolution in texture has been observed after rolling for hot-rolled ZK60 fabricated through conventional extrusion processes. The initial grain structure was found to have experienced noticeable twinning from flattening the tube into plate. After hot rolling, the grain structure became more equiaxed, but the average grain diameter did not change appreciably from 5.15 ± 3.39 µm in the ShAPE extruded material, to 5.27 ± 12.44 µm in the 93% hot rolled sheet. This response to hot rolling is similar to the response of ZK60 fabricated using other methods such as Equal Channel Angular Processing (ECAP). Therefore, this work demonstrates ShAPE has the potential as an alternative method to producing feedstock for Mg alloy sheets. Modifications to the experimental procedure which could lead to improvements in observed properties are briefly discussed.

36 MATERIALS SCIENCE↗

DOE OSTI2018

Electroplating Zr onto U-Mo (Final Report)

Pacific Northwest National Laboratory supported the U.S. High Performance Research Reactor Convert program via the Fuel Fabrication Pillar by evaluating the technical challenges and opportunities related to the use of electroplating the Zr vapor barrier on U-Mo fuel.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2016

U-10Mo Sample Preparation and Examination using Optical and Scanning Electron Microscopy

The purpose of this document is to provide guidelines to prepare specimens of uranium alloyed with 10 weight percent molybdenum (U-10Mo) for optical metallography and scanning electron microscopy. This document also provides instructions to set up an optical microscope and a scanning electron microscope to analyze U-10Mo specimens and to obtain the required information.

36 MATERIALS SCIENCE↗

DOE OSTI2016

U-10Mo Sample Preparation and Examination using Optical and Scanning Electron Microscopy

The purpose of this document is to provide guidelines to prepare specimens of uranium alloyed with 10 weight percent molybdenum (U-10Mo) for optical metallography and scanning electron microscopy. This document also provides instructions to set up an optical microscope and a scanning electron microscope to analyze U-10Mo specimens and to obtain the required information.

36 MATERIALS SCIENCE↗

DOE OSTI2013

Electro-optic device with gap-coupled electrode

An electro-optic device includes an electro-optic crystal having a predetermined thickness, a first face and a second face. The electro-optic device also includes a first electrode substrate disposed opposing the first face. The first electrode substrate includes a first substrate material having a first thickness and a first electrode coating coupled to the first substrate material. The electro-optic device further includes a second electrode substrate disposed opposing the second face. The second electrode substrate includes a second substrate material having a second thickness and a second electrode coating coupled to the second substrate material. The electro-optic device additionally includes a voltage source electrically coupled to the first electrode coating and the second electrode coating.

42 ENGINEERING↗