Engineering Papers⌕ Search

Engineering topics

Rhein, R. A.

Publications and source records attributed to Rhein, R. A..

18 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1980

Prepolymer dianhydrides

A process for preparing dianhydrides that are miscible with hydroxyl prepolymers at moderate temperatures and can cure hydroxyl prepolymers to elastomers at moderate temperatures is disclosed. The dianhydrides are prepared by solution reaction of a prepolymer diol with excess hydride followed by removal of unreacted dianhydride. The prepolymer dianhydrides are miscible with hydroxyl substituted hydrocarbon prepolymers and cure the prepolymers to polyester-linked elastomers.

Rhein, R. A.↗
NASA NTRS1979

Low-temperature elastomer production and curing

Thermally and chemically stable polymers are needed for materials applications, particularly highly-stable elastomers for solid propellant binders where initial high temperature required for dissolving anhydride in polymer is deerimental. Solvent reactant system allows polymerization without condensation of products under low heat. Solvents utilized were dimethylacetamide, dimethyflormamide, etc.

Ingham, J. D.↗
NASA NTRS1978

Curable liquid hydrocarbon prepolymers containing hydroxyl groups and process for producing same

Production of hydroxyl containing curable liquid hydrocarbon prepolymers by ozonizing a high molecular weight saturated hydrocarbon polymer such as polyisobutylene or ethylene propylene rubber is discussed. The ozonized material is reduced using reducing agents, preferably diisobutyl aluminum hydride, to form the hydroxyl containing liquid prepolymers having a substantially lower molecular weight than the parent polymer. The resulting curable liquid hydroxyl containing prepolymers can be poured into a mold and readily cured, with reactants such as toluene diisocyanate, to produce highly stable elastomers having a variety of uses such as binders for solid propellants.

Rhein, R. A.↗
NASA NTRS1975

Liquid ethylene-propylene copolymers

Oligomers are prepared by heating solid ethylene-propylene rubber in container that retains solid and permits liquid product to flow out as it is formed. Molecular weight and viscosity of liquids can be predetermined by process temperature. Copolymers have low viscosity for given molecular weight.

Rhein, R. A.↗
NASA NTRS1974

New polymer systems: Chain extension by dianhydrides

Three anhydrides provide effective chain extension of hydroxy-terminated polyalkylene oxides and polybutadienes. Novel feature of these anhydride reactants is that they are difunctional as anhydrides, but they are tetrafunctional if conditions are selected that lead to total esterification or reaction of all carboxyl groups.

Rhein, R. A.↗
NASA NTRS1973

Some environmental considerations relating to the interaction of the solid rocket motor exhaust with the atmosphere: Predicted chemical composition of exhaust species and predicted conditions for the formation of HCl aerosol

The exhaust products of a solid rocket motor using as propellant 14% binder, 16% aluminum, and 70% (wt) ammonium perchlorate consist of hydrogen chloride, water, alumina, and other compounds. The equilibrium and some frozen compositions of the chemical species upon interaction with the atmosphere were computed. The conditions under which hydrogen chloride interacts with the water vapor in humid air to form an aerosol containing hydrochloric acid were computed for various weight ratios of air/exhaust products. These computations were also performed for the case of a combined SRM and hydrogen-oxygen rocket engine. Regimes of temperature and relative humidity where this aerosol is expected were identified. Within these regimes, the concentration of HCL in the aerosol and weight fraction of aerosol to gas phase were plotted. Hydrochloric acid aerosol formation was found to be particularly likely in cool humid weather.

Rhein, R. A.↗
NASA NTRS1973

Hydrochloric acid aerosol formation by the interaction of hydrogen chloride with humid air

The conditions in which hydrochloric acid aerosol is predicted by the interaction of hydrogen chloride gas with the water vapor in humid air are analyzed. The liquid gas phase equilibrium for the HCL-H2O system is expressed in terms of relative humidity and hydrogen chloride concentration as parts per million, units commonly used in pollution studies. Presented are the concentration (wt %) of HC1 in the aerosol and the concentration of aerosol (ppm) predicted.

Rhein, R. A.↗
NASA NTRS1972

New polymer systems: Chain extension by dianhydrides

The results are presented for a systematic investigation on the use of anhydrides to prepare stable elastomeric materials for space use, under mild reaction conditions. The three anhydrides investigated were found to provide effective chain extension of hydroxy-terminated poly(alkylene oxides) and poly(butadienes). These were tetrahydrofuran tetracarboxylic dianhydride, pyromellitic dianhydride, and benzophenone tetracarboxylic diahydride. The most effective catalyst investigated was ferric acetylacetonate, which resulted in chain extension at 333 K (60 C). One feature of these anhydride reactants is that they are difunctional as anhydrides, but tetrafunctional if conditions are selected that lead to reaction of all carboxyl groups. Therefore, chain extension can be effected and then followed by crosslinking via the residual carboxyl groups.

Rhein, R. A.↗