Engineering Papers⌕ Search

Engineering topics

Ren, Yang

Publications and source records attributed to Ren, Yang.

At least 379 records · Page 21

Conductive nanolamellar Cu/martensite wire with high strength

Cu wires can be greatly strengthened without losing much conductivity if a continuous nanolamellar structure with Cu and a strong second constituent is achieved. Here, we report on a nanolamellar Cu/steel wire fabricated by repetitive hot-pressing, forging, rolling and subsequent wire drawing. Austenization and quenching in liquid nitrogen resulted in a Cu/martensite structure, exhibiting tensile strength of 1220 MPa. The electrical conductivity of the wire was measured to be about 60% International Annealed Copper Standard (IACS), which was comparable with Cu/Fe fabricated by alloying and casting. In situ tensile tests under high energy X-ray diffraction were utilized to explore the deformation behavior of the wire. It was discovered that the martensite carried about 60% of the load, accounting for the high strength.

36 MATERIALS SCIENCE↗

Thermally-induced reversible structural isomerization in colloidal semiconductor CdS magic-size clusters

Structural isomerism of colloidal semiconductor nanocrystals has been largely unexplored. Here, we report one pair of structural isomers identified for colloidal nanocrystals which exhibit thermally-induced reversible transformations behaving like molecular isomerization. The two isomers are CdS magic-size clusters with sharp absorption peaks at 311 and 322 nm. They have identical cluster masses, but slightly different structures. Furthermore, their interconversions follow first-order unimolecular reaction kinetics. We anticipate that such isomeric kinetics are applicable to a variety of small-size functional nanomaterials, and that the methodology developed for our kinetic study will be helpful to investigate and exploit solid-solid transformations in other semiconductor nanocrystals. Furthermore, the findings on structural isomerism should stimulate attention toward advanced design and synthesis of functional nanomaterials enabled by structural transformations.

74 ATOMIC AND MOLECULAR PHYSICS↗

Synchrotron X-Ray and Neutron Diffraction, Total Scattering, and Small-Angle Scattering Techniques for Rechargeable Battery Research

Synchrotron X-ray and neutron scientific facilities are the most advanced resources with a large variety of state of the art instrumentations and powerful tools for materials research. X-rays and neutrons interact with matter in different ways and offer complementary views of materials at various levels. In this article, we will focus on the techniques and applications of synchrotron X-ray and neutron diffraction, total scattering and small-angle scattering for rechargeable battery research. They all belong to the elastic scattering category and provide structure information at different length scales. Here, the diffraction method is generally used to determine the phase and precise atomistic information of crystalline materials, while the total scattering coupled with pair-distribution function analysis can probe local atomic structure of materials no matter they are well crystallized or in amorphous/liquid phases. The small-angle scattering techniques provide us with material size and shape information at nanometer scales. Advantages of synchrotron high-energy X-rays will also be presented, which is particularly suited for the pair-distribution-function studies. We will pay much attention to the technical perspectives and some experimental specifications for the best uses of these methods for battery materials research.

25 ENERGY STORAGE↗

Approaching the capacity limit of lithium cobalt oxide in lithium ion batteries via lanthanum and aluminium doping

Here, lithium cobalt oxides (LiCoO 2 ) possess a high theoretical specific capacity of 274 mAh/g. However, cycling LiCoO 2 -based batteries to voltages greater than 4.35 V vs. Li/Li + causes significant structural instability and severe capacity fade. Consequently, commercial LiCoO 2 exhibits a maximum capacity of only ~165 mAh/g. Here we develop a doping technique to tackle this long-standing issue of instability and thus increase the capacity of LiCoO 2 . La and Al are concurrently doped into Co-containing precursors, followed by high-temperature calcination with lithium carbonate. The dopants are found to reside in the crystal lattice of LiCoO 2 , where La works as a pillar to increase the c-axis distance and Al as a positively charged center, facilitating Li + diffusion, stabilizing the structure and suppressing the phase transition during cycling, even at a high cut-off voltage of 4.5 V. This doped LiCoO 2 displays an exceptionally high capacity of 190 mAh/g, cyclability with 96% capacity retention over 50 cycles and significantly enhanced rate capability.

25 ENERGY STORAGE↗

Twin Crystal Induced near Zero Thermal Expansion in SnO 2 Nanowires

Knowledge of controllable thermal expansion is a fundamental issue in the field of materials science and engineering. Direct blocking of the thermal expansions in positive thermal expansion materials is a challenging but fascinating task. We report a near zero thermal expansion (ZTE) of SnO 2 achieved from twin crystal nanowires, which is highly correlated to the twin boundaries. Local structural evolutions followed by pair distribution function revealed a remarkable thermal local distortion along the twin boundary. Lattice dynamics investigated by Raman scattering evidenced the hardening of phonon frequency induced by the twin crystal compressing, giving rise to the ZTE of SnO 2 nanowires. Further DFT calculation of Grüneisen parameters confirms the key role of compressive stress on ZTE. Finally, our results provide an insight into the thermal expansion behavior regarding to twin crystal boundaries, which could be beneficial to the applications.

36 MATERIALS SCIENCE↗

Structural investigations of Fe-Ga alloys by high-energy x-ray diffraction

The magnetostriction of Fe-Ga alloys is significantly affected by the Ga content, which displays two positive peaks with increasing Ga concentration. This paper presents a systematic structural investigation of rapidly-cooled Fe-Ga alloys by the synchrotron-based high-energy x-ray diffraction. Ga-rich clusters are evidenced for the alloys beyond the first magnetostriction peak, which is identified by the anomalous peak broadening for the (200) fundamental reflection and a shrink of lattice parameter. The generation of Ga-rich clusters in A2 matrix results in the sudden decrease of magnetostriction after the first magnetostriction peak. In conclusion, these findings are important for designing high-performance Fe-Ga magnetostrictive alloys by structural tuning.

36 MATERIALS SCIENCE↗

In situ high-energy X-ray diffraction investigation of the micromechanical behavior of Fe-0.1C-10Mn-0/2Al steel at room and elevated temperatures

The micromechanical behavior of medium-Mn transformation-induced-plasticity (TRIP) steels with nominal chemical compositions of Fe-0.1C-10Mn (mass%) (0Al steel) and Fe-0.1C-10Mn-2Al (mass%) (2Al steel) fabricated by intercritical annealing 600 degrees C for 1 h and 650 degrees C for 1 h, respectively, was investigated using in situ high-energy X-ray diffraction (HE-XRD) with uniaxial tensile tests at 25 degrees C and 100 degrees C. We found that Liiders band propagation promoted lower volume fraction of austenite transformation to martensite in 0Al steel than 2Al steel at 25 degrees C while higher volume fraction of austenite transformation to martensite in 0Al steel than 2Al steel at 100 degrees C. Portevin-Le Chatelier (PLC) band propagation promoted higher volume fraction of austenite transformation to martensite in 0Al steel than 2Al steel during deformation at 25 degrees C and 100 degrees C. Moreover, the addition of Al obviously suppresses the formation of intermediate epsilon martensite during tensile deformation, thus the zigzag change in lattice strain of austenite was completely depressed in 2Al steel. Due to the controlled stability of metastable austenite, the 2Al steel demonstrated the best combination of ultimate tensile strength and total elongation at 25 degrees C.

36 MATERIALS SCIENCE↗

Appearance of superconductivity at the vacancy order-disorder boundary in K x Fe 2 - y Se 2

In this work, the role of phase separation and the effect of Fe-vacancy ordering in the emergence of superconductivity in alkali metal doped iron selenides A x Fe 2-y Se 2 (A = K, Rb, Cs) is explored. High energy x-ray diffraction and Monte Carlo simulation were used to investigate the crystal structure of quenched superconducting (SC) and as-grown nonsuperconducting (NSC) K x Fe 2-y Se 2 single crystals. The coexistence of superlattice structures with the in-plane √2 × √2 K-vacancy ordering and the √5 × √5 Fe-vacancy ordering were observed in both the SC and NSC crystals alongside the I4/mmm Fe-vacancy-free phase. Moreover, in the SC crystals, an Fe-vacancy-disordered phase is additionally proposed to be present. Monte Carlo simulations suggest that it appears at the boundary between the I4/mmm vacancy-free phase and the I4/m vacancy-ordered phases (√5 × √5). Lastly, the vacancy-disordered phase is nonmagnetic and is most likely the host of superconductivity.

36 MATERIALS SCIENCE↗

In Situ Local Measurement of Austenite Mechanical Stability and Transformation Behavior in Third-Generation Advanced High-Strength Steels

Austenite mechanical stability, i.e., retained austenite volume fraction (RAVF) variation with strain, and transformation behavior were investigated for two third generation advanced high strength steels (3GAHSS) under quasi-static uniaxial tension: a 1200 grade, two-phase medium Mn (10 wt%) TRIP steel, and a 980 grade, three-phase TRIP steel produced with a quenching and partitioning heat treatment. The Mn (10 wt%) TRIP steel deforms inhomogeneously via propagative instabilities (Lüders and Portevin Le Châtelier-like bands) while the 980 grade TRIP steel deforms homogenously up to necking. The dramatically different deformation behaviors of these steels required the development of a new in-situ experimental technique that couples volumetric synchrotron X-ray diffraction measurement of RAVF with surface strain measurement using stereo digital image correlation (DIC) over the beam impingement area. Measurement results with the new technique are compared with those from a more conventional approach wherein strains are measured over the entire gauge region while RAVF measurement is the same as that in the new technique. A determination is made as to the appropriateness of the different measurement techniques in measuring the transformation behaviors for steels with homogeneous and inhomogeneous deformation behaviors. Here, extension of the new in-situ technique to the measurement of austenite transformation under different deformation modes and to higher strain rates is discussed.

36 MATERIALS SCIENCE↗

Modifying the Surface of a High-Voltage Lithium-Ion Cathode

Ni-rich lithium nickel manganese cobalt oxides (LiNi x Mn y Co 1–x–y O 2 , NMCs) suffer from poor cycling stability at potentials above 4.2 V vs Li/Li + . This degraded cyclability at high potentials has been largely ascribed to the parasitic reactions between the delithiated cathode and the nonaqueous electrolyte. In this study, we mitigated the performance degradation of high-voltage NMC 622 by designing a functional interfacial layer that consists of a surface doping by Ti 4+ and a TiO 2 coating at the same time. The doping of Ti 4+ near the surface of NMC can suppress the irreversible phase transformation, while the TiO 2 coating can kinetically reduce the rate of the electron-transfer reaction between the delithiated cathode and the solvent. Furthermore, it is revealed that this interfacial engineering approach significantly enhanced both the cycling stability and the rate performance of NMC 622.

25 ENERGY STORAGE↗

Dual Phase Synergy Enabled Large Elastic Strains of Nanoinclusions in a Dislocation Slip Matrix Composite

Freestanding nanomaterials (such as nanowires, nanoribbons and nanotubes) are known to exhibit ultra-large elastic strains and ultra-high strengths. However, harnessing their superior intrinsic mechanical properties in bulk composites has proven to be difficult. A recent breakthrough has overcome this difficulty by using a martensitic phase transforming matrix, in which ultra-large elastic strains approaching the theoretical limit is achieved in Nb nanowires embedded in the matrix. This discovery, whereas breaking a long-standing challenge, still limits our ability of harnessing the exceptional properties of nanomaterials and developing ultrahigh strength bulk materials to a narrow selection of phase transforming alloy matrices. In this study, we investigated the possibility to harness the intrinsic mechanical properties of nanoinclusions in conventional dislocation slip matrix based on a principle of synergy between the inclusion and the matrix. The small spacing between the densely populated hard and dislocation-impenetrable nanoinclusions departmentalize the plastic matrix into small domains to effectively impede dislocation motion within the matrix, inducing significant strengthening and large local elastic strains of the matrix, which in turn induced large elastic strains in the nanoinclusions. This dual phase synergy is verified in a Ti 3 Sn inclusions/B2-NiTi(Fe) plastic matrix model materials system. The maximum elastic strain of Ti 3 Sn inclusion obtained in the dislocation slip matrix is comparable to that achieved in a phase transforming matrix. As a result, this finding opens new opportunities for the development of high-strength nanocomposites.

42 ENGINEERING↗

Giant thermally-enhanced electrostriction and polar surface phase in L a 2 M o 2 O 9 oxygen ion conductors

Ferroelectrics possess spontaneous electric polarization at macroscopic scales which nonetheless imposes strict limitations on the material classes. Recent discoveries of untraditional symmetry-breaking phenomena in reduced material dimensions have indicated feasibilities to extend polar properties to broader types of materials, potentially opening up the freedom for designing materials with hybrid functionalities. Here in this paper, we report the unusual electromechanical properties of La 2 Mo 2 O 9 (LAMOX) oxygen ion conductors, systematically investigated at both bulk and surface length levels. We first observed giant electrostriction effects in La 2 Mo 2 O 9 bulk ceramics that are thermally enhanced in concert with their low-energy oxygen-vacancy hopping dynamics. Moreover, while no clear bulk polarization was detected, the surface phases of LAMOX were found to be manifestly polar, likely originating from the coupling between the intrinsic structural flexibilities with strain gradients (i.e., flexoelectricity) and/or chemical heterogeneities present in the materials. These findings identify La 2 Mo 2 O 9 as a promising electromechanical material system and suggest that the flexible structural and chemical configurations in ionically active materials could enable fundamentally different venues to accommodate electric polarization.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Controlled vapor crystal growth of N a 4 I r 3 O 8 : A three-dimensional quantum spin liquid candidate

In this work, we report the successful bulk single-crystal growth of the hyperkagome lattice iridate Na 4 Ir 3 O 8 (Na438) by vapor transport using a sealed aluminum oxide tube as a container. Crystals were characterized by magnetization, x-ray diffraction, and energy-dispersive x-ray measurements, confirming their identity and properties. Single-crystal x-ray diffraction experiments revealed superlattice peaks indexed on a propagation vector q=(1/3,1/3,1/3) based on the cubic substructure with cell parameter a=8.986(1)Å. This superlattice is three-dimensional and fully coherent. Polarization analysis rules out spin and/or orbital order as the underlying origin of the modulation and points to long-range ordering of Na ions at the notionally disordered Na sites as a plausible origin for the observed superlattice.

36 MATERIALS SCIENCE↗