Engineering Papers⌕ Search

Engineering topics

Ren, Dongsheng

Publications and source records attributed to Ren, Dongsheng.

17 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Solid-state interphases design for high-safety, high-voltage and long-cyclability practical batteries via ethylene carbonate-free electrolytes

In this study, ethylene carbonate (EC) plays a crucial role in current electrolytes for batteries. However, EC reacts exothermically with the electrode to trigger thermal runaway and undergoes continuous oxidative decomposition at high voltages, hindering it application for next-generation batteries. Here we report a simple and effective strategy to design sulfolane(SL)-based electrolyte with reshaped anions-dominated solvation structure, forming highly stable inorganic-dominated electrode-electrolyte interphases that efficiently stabilize nickel-rich cathode and graphite anode. Compared with the conventional electrolyte, practical pouch-type LiNi 0.8 Co 0.1 Mn 0.1 O 2 |Graphite cell with SL-based electrolyte significantly improve self-generated heat T 1 and thermal runaway triggering T 2 by 9.6 and 42.0 °C, respectively. More surprisingly, the pouch cell with SL-based electrolyte exhibits outstanding capacity retention of 88 % after 1000 cycles charged up to 4.5 V. The study brings new insights for unlocking advanced electrolyte candidates to build next-generation practical safer high-energy batteries.

25 ENERGY STORAGE↗
DOE OSTI2023

Inhibit the strain accumulation for 5V spinel cathode by mitigating the phase separation during high voltage stage

LiNi 0.5 Mn 1.5 O 4 (LNMO) spinel cathode is a potential cathode material for high-power, low-cost lithium-ion batteries (LIBs) due to its low raw material cost, high operating voltage and efficient lithium-ion transport channel. However, LNMO suffers from structural stability due to the two-phase-transformation during charge/discharge process, leading to poor cycling performance. Here, to address the issues, we have constructed a homogeneous aggregated LNMO cathode with a multifaceted primary particle, namely the LNMO with single-crystal secondary particles (SSP LNMO). Ex situ and in situ characterizations including the synchrotron X-ray diffraction, the neutron diffraction and full pouch cell validated that the SSP LNMO exhibit a single solid-solution reactions with a restrained lattice evolution during the delithiation/lithiation process. This is in contrast to the normal LNMO cathode, which demonstrates a significant two-phase transition from spinel Li 1-x Ni 0.5 Mn 1.5 O 4 to rock-salt MnO 2 at high voltage. Therefore, the SSP LNMO has greatly improved cycle life compared to the normal LNMO cathode. Overall, this study demonstrates the possibility of constructing LNMO based on primary-grain morphology modulation to improve the intrinsic stability of LIBs.

25 ENERGY STORAGE↗
DOE OSTI2022

Ultrahigh rate capability of manganese based olivine cathodes enabled by interfacial electron transport enhancement

In this study, manganese-based Olivine is a promising cathode candidate with high energy and low cost for Li-ion batteries (LIBs). Its rate capability and cyclability challenges still remain even with nano-size and carbon coating. Herein, an ultrahigh rate performance is achieved by introducing an affinitive conductor to enhance the interfacial electron transport of LiMn 0.7 Fe 0.3 PO 4 via Li 3 V 2 (PO 4 ) 3 . It is found that the Li 3 V 2 (PO 4 ) 3 facilitates sp 2 hybridization to form a highly conductive carbon coating during the carbonized process. The composite 0.9LiMn 0.7 -Fe 0.3 PO 4 .0.1Li 3 V 2 (PO 4 ) 3 can deliver a capacity of 90.9 mAh g -1 and power density of 11444 W kg -1 at 50 C-rate. Both in situ X-ray diffraction and conductive-atomic force microscopy are conducted to understand the synergetic effect between LiMn 0.7 Fe 0.3 PO 4 and Li 3 V 2 (PO 4 ) 3 . The results suggest that the interfacial electron transfer between LiMn 0.2 Fe 0.3 PO 4 particles and the electron conducting medium, such as binder/carbon black composite, is greatly improved so that the highly Li + conductive nature of olivine materials can be fully unleashed. This work demonstrates the importance of efficient interfacial electron transfer to the active cathode particles, and opens up a new venue for the rational design of high-energy and high-power batteries.

25 ENERGY STORAGE↗
DOE OSTI2022

Thermal Runaway of Nonflammable Localized High‐Concentration Electrolytes for Practical LiNi 0.8 Mn 0.1 Co 0.1 O 2 |Graphite‐SiO Pouch Cells

Abstract With continuous improvement of batteries in energy density, enhancing their safety is becoming increasingly urgent. Herein, practical high energy density LiNi 0.8 Mn 0.1 Co 0.1 O 2 |graphite‐SiO pouch cell with nonflammable localized high concentration electrolyte (LHCE) is proposed that presents unique self‐discharge characteristic before thermal runaway (TR), thus effectively reducing safety hazards. Compared with the reference electrolyte, pouch cell with nonflammable LHCE can increase self‐generated heat temperature by 4.4 °C, increase TR triggering temperature by 47.3 °C, decrease the TR highest temperature by 71.8 °C, and extend the time from self‐generated heat to triggering TR by ≈8 h. In addition, the cell with nonflammable LHCE presents superior high voltage cycle stability, attributed to the formation of robust inorganic‐rich electrode–electrolyte interphase. The strategy represents a pivotal step forward for practical high energy and high safety batteries.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Origin and regulation of oxygen redox instability in high-voltage battery cathodes

Oxygen redox at high-voltage has emerged as a transformative paradigm for high-energy battery cathodes such as layered transition-metal oxides by offering extra capacity beyond conventional transition-metal redox. However, these cathodes suffer from voltage hysteresis, voltage fade, and capacity drop upon cycling; single-crystalline cathodes have recently shown some improvements but these challenges still remain. We reveal the fundamental origin of oxygen redox instability to be originated from the domain boundaries that are present in single-crystalline cathode particles. By synthesizing single-crystalline cathodes free of domain boundaries, we show that the elimination of domain boundaries enhances the reversible lattice oxygen redox while inhibiting the irreversible oxygen release. Further, this leads to significantly suppressed structural degradation and improved mechanical integrity during battery cycling and abuse heating. The robust oxygen redox enabled through domain boundary control provides practical opportunities towards high-energy, long-cycling, and safe batteries.

25 ENERGY STORAGE↗
DOE OSTI2022

Revisiting the initial irreversible capacity loss of LiNi 0.6 Co 0.2 Mn 0.2 O 2 cathode material batteries

Layered LiNi 0.6 Co 0.2 Mn 0.2 O 2 (NCM622) attracts widespread attention primarily due to its potential for high energy density and moderate thermal stability. However, the low initial coulombic efficiency (ICE) of the material limits the maximum utilization of their capacity. The capacity loss in the first cycle occurs under 4.0V and keep almost constant are considered as common characteristics for NCM-based materials. A clear cognition on the initial capacity loss may light the way to improve the practical reversible capacity of NCM622 at 4.0V. Conducting operando X-ray diffraction during galvanostatic charge/discharge cycling at different temperature (25 degrees C, 45 degrees C and 60 degrees C) and different current (0.1C, 0.01C, 1C=120 mA g -1 ) in the voltage range of 2.7-4.0V, we find that only 8% of the measured initial irreversible capacity loss is associated with parasitic reactions that form cathode/electrolyte interface, and that the dominant contributors include the slow Li + diffusion kinetics (similar to 46% contribution) and irreversible O3/H1-3 phase transition (similar to 46% contribution). Finally, this semi-quantitative study provides new insight on initial capacity loss, guiding further targeted modification and fully utilization of NCM622.

25 ENERGY STORAGE↗
DOE OSTI2022

Targeted masking enables stable cycling of LiNi 0.6 Co 0.2 Mn 0.2 O 2 at 4.6V

Layered LiNi x Co y Mn 1–x-y O 2 (NCM, or NCMxy(1-x-y)) is a dominant family of cathode materials for lithium-ion batteries (LIBs) due to its high energy density. Among all NCM cathode materials, NCM622 possess the optimal energy density at high potential (≥ 4.6 V vs. Li/Li + ). However, the practical application of NCM622 at high voltage (≥ 4.6 V) is limited by its parasitic reactions and associated safety concerns. Completely physical isolation has been considered as the main approach to mitigate the parasitic reaction. It has also been previously demonstrated that the interface reaction has active site selectivity, and that the reactivity of the active sites can effectively suppressed by blocking the chemically active sites. Herein, a targeted masking by LiFePO 4 @C nanoplates is reported to unlock the stable performance of NCM622 up to 4.6 V vs. Li/Li + . The (targeted masked-NCM622)|graphite pouch cell shows 86.5% capacity retention after 1000 cycles and its maximum temperature during thermal runaway is dramatically reduced from 570 °C to 415 °C. Systematic in/ex situ characterizations, first-principles calculations and half/pouch targeted LiFePO 4 @C covers the surface of NCM partcell evaluation prove that PO 4 3- is preferentially adsorbed on transition metal sites, stabilizing both the transition metal ions and oxygen ions on the surface against the ethylene carbonate-containing traditional electrolyte even under high voltage (≥ 4.6 V vs. Li/Li + ). Furthermore, this work opens up new venue for rational design of high-performance cathode materials through a low-cost and scalable decoration process, and reveal a new understanding of interfacial activity of materials.

25 ENERGY STORAGE↗
DOE OSTI2021

High-Voltage and High-Safety Practical Lithium Batteries with Ethylene Carbonate-Free Electrolyte

Serious safety issues are impeding the widespread adoption of high-energy lithium-ion batteries for transportation electrification and large-scale grid storage. Herein, a triple-salt ethylene carbonate (EC) free electrolyte for high-safety and high-energy pouch-type LiNi 0.8 Mn 0.1 Co 0.1 O 2 |graphite (NMC811|Gr) cells is reported. This EC-free electrolyte can effectively stabilize the NMC811 surface under high potential (up to 4.5 V), as well as generate a stable interphase to achieve a superior compatibility with the Gr anode. The electrolyte strategy enables significantly enhanced intrinsic safety (trigger temperature of thermal runaway (TR) increased by 67.0 °C), excellent electrochemical properties (4.2V, ≈100% after 200 cycles), and superior high voltage stability (4.5 V, 82.1% after 200 cycles). Furthermore, the work opens up a new avenue for developing novel electrolyte systems to build safer high-energy batteries for practical applications.

25 ENERGY STORAGE↗
DOE OSTI2021

Simultaneously Blocking Chemical Crosstalk and Internal Short Circuit via Gel-Stretching Derived Nanoporous Non-Shrinkage Separator for Safe Lithium-Ion Batteries

The separator, an ionic permeable and electronic insulating membrane between cathode and anode, plays a crucial role in the electrochemical and safety performance of batteries. However, the commercial polyolefin separators not only suffer from inevitable thermal shrinkage at elevated temperature, but also fail to inhibit the hidden chemical crosstalk of reactive gases such as O 2 , leading to often reported thermal runaway (TR) and hence preventing large-scale implementation of high-energy-density lithium-ion batteries. Herein, a nanoporous non-shrinkage separator (GS-PI) was fabricated via a novel gel-stretching orientation approach to eliminate TR. In situ synchrotron small angle X-ray scattering during heating clearly showed that the as-prepared thin GS-PI separator exhibits superior mechanical tolerance at high temperature, thus effectively preventing internal short circuit. Meanwhile, the unique nanoporous structure design further blocks chemical crosstalk and the associated exothermic reactions. Accelerating Rate Calorimetry test revealed that the practical 1 Ah LiNi 0.6 Co 0.2 Mn 0.2 O 2 (NCM622)/graphite pouch cell using GS-PI nanoporous separator show a maximum temperature rise (dT/dt max ) of only 3.7 °C s -1 compared to 131.6 °C s -1 in the case of Al 2 O 3 @PE macroporous separator. Furthermore, despite the reduced pore size, the GS-PI separator demonstrates better cycling stability than conventional Al 2 O 3 @PE separator at high temperature without sacrificing specific capacity and rate capability.

25 ENERGY STORAGE↗
DOE OSTI2021

In-built ultraconformal interphases enable high-safety practical lithium batteries

There is an urgent need for high-safety and high-energy lithium-ion batteries to satisfy the rapidly increasing need for energy storage. Nickel-rich layered cathodes have been at the forefront of the revolution for batteries due to their relatively high capacity and low cost. However, with the increase of nickel content, the batteries suffer from severe safety concerns, which caused by thermal runaway. Herein, we show that the ultraconformal cathode-electrolyte interphase (CEI) protective skin with high inorganic content dramatically enhances the safety of high-energy practical Li-ion pouch cells. We find that the robust CEI skin significantly improves the intrinsic thermal stability, mitigates the evolution of oxygen resulting from phase transition, and effectively suppresses the associated parasitic reactions between the delithiated cathodes and electrolyte. The in-situ CEI engineering strategy is simple and suitable for practical industrial manufacture, and it provides design ideas for aggressive nickel-rich cathodes towards safe and high-energy batteries.

25 ENERGY STORAGE↗
DOE OSTI2021

In situ observation of thermal-driven degradation and safety concerns of lithiated graphite anode

Abstract Graphite, a robust host for reversible lithium storage, enabled the first commercially viable lithium-ion batteries. However, the thermal degradation pathway and the safety hazards of lithiated graphite remain elusive. Here, solid-electrolyte interphase (SEI) decomposition, lithium leaching, and gas release of the lithiated graphite anode during heating were examined by in situ synchrotron X-ray techniques and in situ mass spectroscopy. The source of flammable gas such as H 2 was identified and quantitively analyzed. Also, the existence of highly reactive residual lithium on the graphite surface was identified at high temperatures. Our results emphasized the critical role of the SEI in anode thermal stability and uncovered the potential safety hazards of the flammable gases and leached lithium. The anode thermal degradation mechanism revealed in the present work will stimulate more efforts in the rational design of anodes to enable safe energy storage.

25 ENERGY STORAGE↗
DOE OSTI2021

Unlocking the self-supported thermal runaway of high-energy lithium-ion batteries

Layered Ni-rich LiNi x Mn y Co 1-x-y O 2 (NMC) materials are the most promising cathode materials for Li-ion batteries due to their favorable energy densities. However, the low thermal stability typically caused by detrimental oxygen release leads to significant safety concerns. Determining the pathways of oxygen evolution reaction is essential, as the ideal safety countermeasure is to break the reaction chain of thermal runaway. In this study, we demonstrate that two endogenous pathways of oxygen involved in strong exothermic reactions lead the NMC811|graphite pouch cell to an uncontrollable state, and we quantify the individual contribution of the pathways to thermal runaway. Approximately 41% of thermal-induced oxygen reacts aggressively with ethylene carbonate (EC) at the cathode/electrolyte interface with 16% heat generation, accelerating the self-heating rate and thereby further triggering thermal runaway. The residual oxygen that survives the reaction with carbonate spreads to the lithiated anode with major heat generation (65%), bringing the battery to the maximum destructive temperature during thermal runaway. By confirming the significant roles of EC and anode, a deeper understanding on battery fire was achieved. Finally, the revealed mechanism can help guide studies on stopping the two reaction pathways, allowing for the safer use of high-energy lithium-ion batteries in the future.

25 ENERGY STORAGE↗
DOE OSTI2021

Thermal runaway mechanism of lithium-ion battery with LiNi 0.8 Mn 0.1 Co 0.1 O 2 cathode materials

Battery safety is critical to the application of lithium-ion batteries, especially for high energy density battery applied in electric vehicles. In this paper, the thermal runaway mechanism of LiNi 0.8 Co 0.1 Mn 0.1 O 2 based lithium-ion battery is illustrated. And the reaction between cathode and flammable electrolyte is proved as the trigger of the thermal runaway accident. In detail, with differential scanning calorimeter tests for battery components, the material combination contributing to thermal runaway was decoupled. Characterization with synchrotron X-ray diffraction and transmission electron microscopy with in-situ heating proved that the vigorous exothermic reaction is initiated by the liberated oxygen species. The pulse of highly active oxygen species reacted quickly with the electrolyte, accompanied with tremendous heat release, which accelerated the phase transformation of charged cathode. Also, the mechanism is verified by a confirmatory experiment when the highly active oxygen species were trapped by anion receptor, the phase transformation of the charged cathode was inhibited. Clarifying the thermal runaway mechanism of LiNi 0.8 Co 0.1 Mn 0.1 based lithium-ion battery may light the way to battery chemistries of both high energy density and high safety.

25 ENERGY STORAGE↗
DOE OSTI2021

Development of cathode-electrolyte-interphase for safer lithium batteries

Accompanied by the adoption of aggressive cathodes to continuously improve batteries energy density, enhancing their safety is becoming increasingly urgent for the electric vehicle development. In-situ controllable formation of robust cathode-electrolyte interphase (CEI) with high inorganic content seems to be the most promising strategy to address the thermal runaway concerns. Moreover, the in-situ formation strategy via suitable electrolyte replacement or electrolyte additives is extremely simple yet effective, especially for industrial manufacture of batteries. Here, this paper briefly reviews recent advanced CEIs formed by conventional carbonate-based electrolytes, fluorinated electrolytes, concentrated electrolytes, and solid state electrolytes. The focus on the thermal stability of the cathodes after CEI modification, and at the same time conduct safety tests at the material, cell, and module levels for comprehensive evaluation are encouraged. The review will provide inspiration for future developments in battery safety and push forward the practical applications of newly developed high-energy density batteries.

25 ENERGY STORAGE↗
DOE OSTI2020

A Facile Approach to High Precision Detection of Cell-to-Cell Variation for Li-ion Batteries

Abstract Over the past decade, it has been repeatedly demonstrated that homogeneity in electrochemical performance of lithium-ion cells plays a major role in determining the life and safety of lithium-ion battery modules or packs. Generally, the homogeneity of a battery pack is evaluated by characterizing the cells individually in terms of capacity, mass, impedance. Particularly, high quality electrochemical data heavily relies on the availability of high precision current source to minimize the discrepancy induced by the channel-to-channel variation. Here, a facile and precise measurement method is reported for screening cell-to-cell variations, in which voltage is the only indicator parameter independent of high precision current source. In detail, by connecting the cells in series (CiS), the measurement error of electrochemical data caused by stability and discrepancy of current sources among different charge/discharge equipment can be effectively avoided. The findings of this work showed that the cell-to-cell variations can be simply and sensitively detected with CiS configuration. For example, the relative standard deviation, which is the evaluation criterion of battery homogeneity, was 2.14% based on CiS while it was 0.43% based on individual measurements. The simple and precise CiS measurement is promising for evaluation of cell quality or module integration quality. In addition, this work can also provide a solid foundation for the development of detection algorithms for battery management systems to rapidly monitor battery homogeneity.

25 ENERGY STORAGE↗
DOE OSTI2020

Toward a high-voltage fast-charging pouch cell with TiO 2 cathode coating and enhanced battery safety

Nickel-rich layered lithium transition metal oxides, LiNi x Co y Mn 1-x-y O 2 , are key cathode materials for high-energy lithium-ion batteries owing to their high specific capacity. However, the commercial deployment of nickel-rich oxides has been hampered by their poor thermostability and insufficient cycle life. In this work full batteries with uncoated and TiO 2 -coated LiNi 0.5 Co 0.2 Mn 0.3 O 2 cathodes and graphite anodes are compared in terms of electrochemical performance and safety behavior. The battery using a TiO 2 -coated LiNi 0.5 Co 0.2 Mn 0.3 O 2 cathode exhibited better cyclic performance at high cutoff voltage. Electrochemical impedance spectroscopy analysis indicated that the TiO 2 -coated LiNi 0.5 Co 0.2 Mn 0.3 O 2 cathode gave the battery a more stable charge transfer resistance. Transmission electron microscopy demonstrated that TiO 2 coating reduced accumulation of the cathode electrolyte interface layer on the particle surface. Time-of-flight secondary ion mass spectrometry demonstrated that TiO 2 coating markedly enhanced the interface stability of the cathode particle and protected the particle from serious etching by the electrolyte. Accelerating rate calorimetry revealed that the trigger temperature of thermal runaway for the battery using TiO 2 -coated LiNi 0.5 Co 0.2 Mn 0.3 O 2 as cathode material was 257 °C, which was higher than that of the battery with the uncoated LiNi 0.5 Co 0.2 Mn 0.3 O 2 cathode (251 °C). In situ X-ray diffraction during heating demonstrated that this enhanced safety can be attributed to the suppressed phase evolution of the coated cathode material.

25 ENERGY STORAGE↗