Engineering Papers⌕ Search

Engineering topics

Reeves, Glenn

Publications and source records attributed to Reeves, Glenn.

12 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2022

A Model-Based Approach for Europa Lander Mission Concept Exploration

This study investigates the usage of a system model as a means to capture concept formulation for a potentialmission. Efforts are underway at JPL to explore thearchitectural and system concepts for a lander on Europa.Executing a mission on the surface of Europa poses uniquechallenges that will require the lander to operate with onboardautonomy that is more sophisticated than systems previouslyoperated by JPL. Current tasks to explore surface missionconcepts intend to identify concepts that enable a high degree ofonboard autonomy as well as identify the issues and technicallimitations that restrict autonomy. The Europa lander missionconcept team is developing a system model to support thisexploration.The results of this study highlight how executable systemmodeling and the associated engineering environment may beapplied to pre-project conceptual exploration. The applicationof system modeling has resulted in a central system model thatprecisely describes the concepts formulated by the EuropaLander Mission Concept Team. Documentation in the form ofdiagrams and narrative has been directly generated from thesystem model and accessible by team members in a webapplication. The executability of the system model enablesvarious analyses such as simulation of interactions betweencomponents and evaluating system behavior againstrequirements. Execution of the system model has produced statetimelines, plots of system variables, and simulation traces basedon input scenarios. The executable system model enables therapid and repeatable production of these artifacts.

Reeves, Glenn↗
NASA NTRS2021

Mission Concept Design for Autonomous Space Missions using Mission-Level Modeling and Simulation

NASA’s Europa Lander mission is to search for biosignatures on Europa based on in-situ science using a lander architecture. This mission presents a set of challenges that requires a high level of autonomy on the lander system, leading to the need for a new operational paradigm that supports better collaboration and coordination between the lander and the ground operations team. M\&S is used for both designing the onboard system-level autonomy and the ground operations paradigm that allows effective and efficient collaboration and coordination between the lander and the ground operations team. In this paper, M\&S as applied to the design of new mission and operational concepts will be discussed. At its current early stage of the mission development for Europa Lander, the M\&S is used to explore different mission concepts and gain insights for design (formative) rather than to verify and validate fully designed mission concepts quantitatively (summative). Organically, we established a new approach to mission and operational concept exploration using high-fidelity modeling and simulation. M\&S has been an integral part of the approach of defining constraints and assertions, designing mission concepts, assessing (i.e., simulating them), and discovering insights, which feeds back to the definition an design steps. This organically-established approach provided important benefits to the project at its early phase of the development by enabling the project team to be able to build shared understanding of impacts from design characteristics, constraints, and their interactions on the mission performance.

Ye, Sean↗
NASA NTRS2019

ARIEL: Autonomous Excavation Site Selection for Europa Lander Mission Concept

This paper presents ARIEL (Autonomous Ranking and Interrogation of Excavation Location), an autonomy system for selecting an excavation site on-board for NASA’s Europa Lander Mission Concept. Historically, excavation site selection has been performed by a lengthy ground-in-the-loop (GITL) process involving manual inspections, assessments, and decision making in past missions. However, as Europa Lander would have approximately 20 days of lifetime after the landing, many surface activities, including excavation site selection, must be autonomously performed on-board. This paper describes the overall system of ARIEL as well as its two major algorithmic components: vision-based candidate selection and smart interrogation, which estimates the physical properties of the icy surface through physical contact with the robotic arm’s endeffector. Preliminary results are presented using images from Earth analogue sites. The Europa Lander mission returned to the formulation phases in early 2019 while ARIEL was at an early stage of development. Described in this paper is a snapshot of ARIEL as of the project suspension. This paper also describes the remaining challenges to be solved, should the mission resume in the future.

Ono, Hiro↗
NASA NTRS2013

The Unparalleled Systems Engineering of MSL's Backup Entry, Descent, and Landing System: Second Chance

Second Chance (SECC) was a bare bones version of Mars Science Laboratory's (MSL) Entry Descent & Landing (EDL) flight software that ran on Curiosity's backup computer, which could have taken over swiftly in the event of a reset of Curiosity's prime computer, in order to land her safely on Mars. Without SECC, a reset of Curiosity's prime computer would have lead to catastrophic mission failure. Even though a reset of the prime computer never occurred, SECC had the important responsibility as EDL's guardian angel, and this responsibility would not have seen such success without unparalleled systems engineering. This paper will focus on the systems engineering behind SECC: Covering a brief overview of SECC's design, the intense schedule to use SECC as a backup system, the verification and validation of the system's "Do No Harm" mandate, the system's overall functional performance, and finally, its use on the fateful day of August 5th, 2012.

fault protection↗
NASA NTRS2013

The unparalleled systems engineering of MSL’s backup entry, descent, and landing system : second chance

Second Chance (SECC) was a bare bones version of Mars Science Laboratory’s (MSL) Entry Descent & Landing (EDL) flight software that ran on Curiosity’s backup computer, which could have taken over swiftly in the event of a reset of Curiosity’s prime computer, in order to land her safely on Mars. Without SECC, a reset of Curiosity’s prime computer would have lead to catastrophic mission failure. Even though a reset of the prime computer never occurred, SECC had the important responsibility as EDL’s guardian angel, and this responsibility would not have seen such success without unparalleled systems engineering. This paper will focus on the systems engineering behind SECC: Covering a brief overview of SECC’s design, the intense schedule to use SECC as a backup system, the verification and validation of the system’s “Do No Harm” mandate, the system’s overall functional performance, and finally, its use on the fateful day of August 5th, 2012.

Reeves, Glenn↗
NASA NTRS2011

Enabling Future Robotic Missions with Multicore Processors

Recent commercial developments in multicore processors (e.g. Tilera, Clearspeed, HyperX) have provided an option for high performance embedded computing that rivals the performance attainable with FPGA-based reconfigurable computing architectures. Furthermore, these processors offer more straightforward and streamlined application development by allowing the use of conventional programming languages and software tools in lieu of hardware design languages such as VHDL and Verilog. With these advantages, multicore processors can significantly enhance the capabilities of future robotic space missions. This paper will discuss these benefits, along with onboard processing applications where multicore processing can offer advantages over existing or competing approaches. This paper will also discuss the key artchitecural features of current commercial multicore processors. In comparison to the current art, the features and advancements necessary for spaceflight multicore processors will be identified. These include power reduction, radiation hardening, inherent fault tolerance, and support for common spacecraft bus interfaces. Lastly, this paper will explore how multicore processors might evolve with advances in electronics technology and how avionics architectures might evolve once multicore processors are inserted into NASA robotic spacecraft.

multi-core processor↗