Engineering Papers⌕ Search

Engineering topics

Quinn, R. D.

Publications and source records attributed to Quinn, R. D..

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

Dynamic modeling and control of multibody mechanical systems which are structurally flexible

This paper concerns the dynamic modeling and control of multibody, open-chained, structurally flexible, mechanical systems where the bodies are connected by revolute joints. The equations of motion are formulated based on a matrix form of Lagrange's equations for inertial quasi-coordinates. Each body is treated as a substructure of the system. For the purposes of simulation and control, the equations of motion are separated into two sets of equations using a perturbation approach: one to describe large rigid-body motions of the articulated system and the other to describe small linear motions of the bodies about the large motions. A biologically natural control strategy is used for vibration suppression and tracking the prescribed motion.

Quinn, R. D.↗
NASA NTRS1991

The use of locally optimal trajectory management for base reaction control of robots in a microgravity environment

A locally-optimal trajectory management (LOTM) approach is analyzed, and it is found that care should be taken in choosing the Ritz expansion and cost function. A modified cost function for the LOTM approach is proposed which includes the kinetic energy along with the base reactions in a weighted and scale sum. The effects of the modified functions are demonstrated with numerical examples for robots operating in two- and three-dimensional space. It is pointed out that this modified LOTM approach shows good performance, the reactions do not fluctuate greatly, joint velocities reach their objectives at the end of the manifestation, and the CPU time is slightly more than twice the manipulation time.

Lin, N. J.↗
NASA NTRS1990

Control/structure interactions of Freedom's solar dynamic modules

The purpose of this paper is to address potential control/structures interaction (CSI) problems of large flexible multibody structures in the presence of pointing and tracking requirements. A control approach is introduced for the simultaneous tracking and vibration control of multibody space structures. The application that is discussed is Space Station Freedom configured with solar dynamic (SD) modules. The SD fine-pointing and tracking requirements may necessitate controller frequencies above the structural natural frequencies of Freedom and the SD modules. It is well known that this can give rise to CSI problems if the controller is designed without due consideration given to the structural dynamics of the system. In this paper, possible CSI problems of Freedom's solar dynamic power systems are demonstrated using a simple lumped mass model. A NASTRAN model of Freedom developed at NASA Lewis is used to demonstrate potential CSI problems and the proposed tracking and vibration control approach.

Quinn, R. D.↗
NASA NTRS1989

Distributed neural control of a hexapod walking vehicle

There has been a long standing interest in the design of controllers for multilegged vehicles. The approach is to apply distributed control to this problem, rather than using parallel computing of a centralized algorithm. Researchers describe a distributed neural network controller for hexapod locomotion which is based on the neural control of locomotion in insects. The model considers the simplified kinematics with two degrees of freedom per leg, but the model includes the static stability constraint. Through simulation, it is demonstrated that this controller can generate a continuous range of statically stable gaits at different speeds by varying a single control parameter. In addition, the controller is extremely robust, and can continue the function even after several of its elements have been disabled. Researchers are building a small hexapod robot whose locomotion will be controlled by this network. Researchers intend to extend their model to the dynamic control of legs with more than two degrees of freedom by using data on the control of multisegmented insect legs. Another immediate application of this neural control approach is also exhibited in biology: the escape reflex. Advanced robots are being equipped with tactile sensing and machine vision so that the sensory inputs to the robot controller are vast and complex. Neural networks are ideal for a lower level safety reflex controller because of their extremely fast response time. The combination of robotics, computer modeling, and neurobiology has been remarkably fruitful, and is likely to lead to deeper insights into the problems of real time sensorimotor control.

Beer, R. D.↗
NASA NTRS1989

New results concerning the use of kinematically redundant manipulators in microgravity environments

This paper is concerned with the development of control strategies for kinematically redundant manipulators to be used in Space Station laboratories. These robots must be able to conduct experiments and manufacturing processes without disturbing the microgravity environment, and thus their dynamic base reactions/motions must be nearly eliminated. Redundant degrees of freedom permit the inverse kinematics problem to be solved in conjuction with the minimization of a cost function defined as a weighted sum of the base reactions. It is shown that the weights in the cost function should be used as an additional set of parameters in the minimization problem. The actual performance of the local optimal trajectory approach is demonstrated to be not as good as was previously reported.

Quinn, R. D.↗
NASA NTRS1989

Dynamic modeling of multi-jointed mechanical systems for space applications

The dynamic formulation, modeling and motion simulation of multijointed open-chained mechanical systems as applied to space-based robotic systems are presented. Equations of motion are formulated in a unique manner based on a form of Lagrange's equations for quasi-coordinates (Boltzmann-Hamel equations). In order that kinematic joint constraints can be satisfied for the situation where some joints have less than three degrees of freedom, the equations are transformed into forms in terms of relative angular velocities and Euler angles. Rigid multibody examples are presented which show that the method can provide a dynamic model of systems of varying complexity.

Quinn, R. D.↗
NASA NTRS1988

Redundant manipulators for momentum compensation in a micro-gravity environment

This paper is concerned with the implementation and assessment of joint motion management strategies for kinematically redundant robotic manipulators operating in the micro-gravity environment of Space Station. These robots must be capable of conducting experiments and manufacturing processes without disturbing the micro-gravity environment through base reactions/motions. The redundant degrees of freedom of the manipulator permit the inverse kinematic problem to be solved simultaneously with the minimization of a cost function. The cost function in this case is the weighted sum of the squares of the base forces and moments and is minimized over discrete time segments. The Generalized Inverse Method and Rayleigh Ritz technique are used to solve the combined optimization/inverse kinematics problem. Numerical examples include various robotic configurations and degrees of manipulator redundancy.

Quinn, R. D.↗
NASA NTRS1988

Robots for manipulation in a micro-gravity environment

This paper is concerned with the development of control strategies and mechanisms for robots operating in the micro-gravity environment of Space Station. These robots must be capable of conducting experiments and manufacturing processes without disturbing the micro-gravity environment through base reactions/motions. Approaches discussed for controlling the robot base reactions/motions include strategies making use of manipulators with redundant degrees of freedon, actuators at the robot base, and a redundant (balancing) arm. Two degree-of-freedom, traction-drive joints are discussed as well as the conceptual design for a traction-driven manipulator.

Quinn, R. D.↗
NASA NTRS1987

Equations of motion for maneuvering flexible spacecraft

This paper is concerned with the derivation of the equations of motion for maneuvering flexible spacecraft both in orbit and in an earth-based laboratory. The structure is assumed to undergo large rigid-body maneuvers and small elastic deformations. A perturbation approach is presented in which the quantities defining the rigid-body maneuver are regarded as the unperturbed motion and the elastic motions and deviations from the rigid-body motions are regarded as the perturbed motion. The perturbation equations are linear, non-self-adjoint, and with time-dependent coefficients. A maneuver force distribution exciting the least amount of elastic deformation of the spacecraft is developed. Numerical results highlight the vibration caused by rotational maneuvers.

Meirovitch, L.↗
NASA NTRS1987

Maneuvering and vibration control of flexible spacecraft

This paper is concerned with the problem of slewing a large structure in space and suppressing any vibration at the same time. The structure is assumed to undergo large rigid-body motions and small elastic deformations. A perturbation method permits a maneuver strategy independent of the vibration control. Optimal control and pole placement techniques, formulated to include first-order actuator dynamics, are used to suppress the vibration during maneuver. The theory is illustrated by simultaneous maneuvering and vibration control of the Spacecraft Control Laboratory Experiment (SCOLE) model in a space environment.

Meirovitch, L.↗
NASA NTRS1986

Equations for the vibration of a slewing flexible spacecraft

The derivation of the equations describing the vibration of a flexible spacecraft is presented in the context of a perturbation method permitting a maneuver strategy independent of the vibration control. A straightforward open-loop minimum-time rotational maneuver strategy is developed for the spacecraft regarded as a rigid body. Actuator dynamics are considered in the formulation. A maneuver force distribution is developed which excites the least amount of elastic deformation of the flexible parts of the spacecraft. An efficient technique for simulating structural vibrations during a maneuver is presented. Numerical results demonstrate the maneuver strategy and highlight the vibration caused by rotational maneuvers.

Quinn, R. D.↗
NASA NTRS1986

Maneuver and vibration control of SCOLE

This paper is concerned with the simultaneous maneuver and vibration control of the Spacecraft Control Laboratory Experiment (SCOLE). Summaries of the derivation of the equations of motion and of a perturbation method permitting a maneuver strategy independent of the vibration control are presented. Some of the problems encountered in dynamical modeling of a flexible spacecraft in an earth-based laboratory are high-lighted and solved. Numerical results demonstrating rotational maneuvers of the SCOLE model are included.

Quinn, R. D.↗
NASA NTRS1985

Maneuvering of flexible spacecraft with application to SCOLE

This paper is concerned with the derivation of the equations of motion for the Spacecraft Control Laboratory Experiment (SCOLE). For future reference, the equations of motion of a similar structure orbiting the earth are also derived. The structure is assumed to undergo large rigid-body maneuvers and small elastic deformations. A perturbation approach is presented where the quantities defining the rigid-body maneuver are assumed to be relatively large, with the elastic deformations and deviations from the rigid-body maneuver being relatively small. The perturbation equations have the form of linear, non-self-adjoint equations with time-dependent coefficients. An active control technique can then be formulated to permit maneuvering of the spacecraft and simultaneously suppressing the elastic vibration.

Meirovitch, L.↗
NASA NTRS1984

Thermal response of Space Shuttle wing during reentry heating

A structural performance and resizing (SPAR) finite element thermal analysis computer program was used in the heat transfer analysis of the Space Shuttle Orbiter that was subjected to reentry aerodynamic heatings. One wing segment of the right wing (WS 240) and the whole left wing were selected for the thermal analysis. Results showed that the predicted thermal protection system (TPS) temperatures were in good agreement with the space transportation system, trajectory 5 (STS-5) flight-measured temperatures. In addition, calculated aluminum structural temperatures were in fairly good agreement with flight data up to the point of touchdown. Results also showed that the internal free convection has a considerable effect on the change of structural temperatures after touchdown.

Gong, L.↗
NASA NTRS1984

Thermal response of Space Shuttle wing during reentry heating

A structural performance and resizing (SPAR) finite element thermal analysis computer program was used in the heat transfer analysis of the space shuttle orbiter that was subjected to reentry aerodynamic heatings. One wing segment of the right wing (WS 240) and the whole left wing were selected for the thermal analysis. Results showed that the predicted thermal protection system (TPS) temperatures were in good agreement with the space transportation system, trajectory 5 (STS-5) flight-measured temperatures. In addition, calculated aluminum structural temperatures were in fairly good agreement with the flight data up to the point of touchdown. Results also showed that the internal free convection had a considerable effect on the change of structural temperatures after touchdown.

Gong, L.↗