Engineering topics

Qin, Kaiqiang

Publications and source records attributed to Qin, Kaiqiang.

6 records

DOE OSTI2024

A Coordinated-Anion-Enriched Electrolyte for Lean-Electrolyte Li–S Batteries

The solid electrolyte interphase (SEI) on Li and cathode electrolyte interphase (CEI) at sulfurized polyacrylonitrile (SPAN) formed in the commonly used liquid electrolytes cannot accommodate the large volume change of both Li anode and SPAN cathode, resulting in severe electrolyte and Li consumption and fast capacity decay under high mass loading and lean electrolyte condition. Herein, a LiF-rich SEI and a LiF-Li x N y O z co-enriched CEI are simultaneously formed by adding ionic liquid (Py 13 TFSI) in the localized high-concentration electrolyte (LHCE), which forms a coordinated-anion-enriched solvation structure. In this study, the LiF-rich interphase results in less stress/strain during large volume changes of Li and SPAN and therefore achieving obviously improved stability even at a high areal capacity. Consequently, Li (50 μm)||SPAN (6 mg cm -2 ) pouch cells under the lean electrolyte condition (E/S ratio of 5 mL g SPAN -1 ) delivers a stable cycle life of 120 cycles with 79.2% capacity retention, demonstrating great promise for high-energy-density lithium-sulfur batteries.

25 ENERGY STORAGE↗

DOE OSTI2023

Anion modification for stable solid electrolyte interphase in anode-free lithium metal batteries

The durability of anode-free Li metal batteries is largely limited by the undesired Li plating/stripping irreversibility on the current collector due to the infinite volume change, uncontrollable Li dendrite growth, and continuous parasitic reactions between Li metal and the electrolyte. To address these challenges, the formation of a stable and robust solid electrolyte interphase (SEI) with high ionic conductivity and strong mechanical strength is critical. Here, we developed an advanced electrolyte by introducing LiNO 3 into the localized high concentration electrolyte (LHCE) with lithium bis(fluorosulfonyl)imide (LiFSI) salt, 1,2-dimethoxyethane (DME) solvent, and 1,1,2,2-tetrafluoroethyl-2,2,3,3-tetrafluoropropylether (TFTE) diluent to in situ construct a LiF and Li x N y O z co-enriched passivation layer on the Cu current collector. The synergetic effect of high mechanical strength of LiF and high ionic conductivity of Li x N y O z endows the Li metal anode with a high Coulombic efficiency (CE) of 99.35%. In conclusion, in anode-free Li metal pouch cell using LiFePO 4 (LFP) as a cathode holds an exceptionally improved capacity retention under the charging/discharging rate of 1/3 C, demonstrating great promise for developing dendrite-free and safe Li metal batteries.

25 ENERGY STORAGE↗

DOE OSTI2022

A Fast‐Charging and High‐Temperature All‐Organic Rechargeable Potassium Battery

Abstract Developing fast‐charging, high‐temperature, and sustainable batteries is critical for the large‐scale deployment of energy storage devices in electric vehicles, grid‐scale electrical energy storage, and high temperature regions. Here, a transition metal‐free all‐organic rechargeable potassium battery (RPB) based on abundant and sustainable organic electrode materials (OEMs) and potassium resources for fast‐charging and high‐temperature applications is demonstrated. N‐doped graphene and a 2.8 m potassium hexafluorophosphate (KPF 6 ) in diethylene glycol dimethyl ether (DEGDME) electrolyte are employed to mitigate the dissolution of OEMs, enhance the electrode conductivity, accommodate large volume change, and form stable solid electrolyte interphase in the all‐organic RPB. At room temperature, the RPB delivers a high specific capacity of 188.1 mAh g −1 at 50 mA g −1 and superior cycle life of 6000 and 50000 cycles at 1 and 5 A g −1 , respectively, demonstrating an ultra‐stable and fast‐charging all‐organic battery. The impressive performance at room temperature is extended to high temperatures, where the high‐mass‐loading (6.5 mg cm −2 ) all‐organic RPB exhibits high‐rate capability up to 2 A g −1 and a long lifetime of 500 cycles at 70–100 °C, demonstrating a superb fast‐charging and high‐temperature battery. The cell configuration demonstrated in this work shows great promise for practical applications of sustainable batteries at extreme conditions.

25 ENERGY STORAGE↗

DOE OSTI2022

Halogenated Carboxylates as Organic Anodes for Stable and Sustainable Sodium-Ion Batteries

Organic materials are competitive as anodes for Na-ion batteries (NIBs) due to the low cost, abundance, environmental benignity, and high sustainability. In this paper, we synthesized three halogenated carboxylate-based organic anode materials to exploit the impact of halogen atoms (F, Cl, and Br) on the electrochemical performance of carboxylate anodes in NIBs. The fluorinated carboxylate anode, disodium 2, 5-difluoroterephthalate (DFTP-Na), outperforms the other carboxylate anodes with H, Cl, and Br, in terms of high specific capacity (212 mA h g -1 ), long cycle life (300 cycles), and high rate capability (up to 5 A g -1 ). As evidenced by the experimental and computational results, the two F atoms in DFTP reduce the solubility, enhance the cyclic stability, and interact with Na+ during the redox reaction, resulting in a high-capacity and stable organic anode material in NIBs. Therefore, this work proves that fluorinating carboxylate compounds is an effective approach to developing high-performance organic anodes for stable and sustainable NIBs.

25 ENERGY STORAGE↗

DOE OSTI2022

Synergy of carbonyl and azo chemistries for wide-temperature-range rechargeable aluminum organic batteries

Rechargeable aluminum organic batteries (RAOBs) are promising for developing cost-effective and sustainable energy storage devices due to the low cost, abundance, and high sustainability of aluminum and organic resources. In this study, we designed and synthesized a redox-active polymer bearing carbonyl and azo groups as a cathode material for RAOBs. The polymeric cathode exhibits a high reversible specific capacity, superior cyclic stability, fast charging capability, and a wide operation temperature range (₋40°C to 100°C). X-ray photoelectron spectroscopy (XPS), pair distribution function (PDF) analysis, and soft X-ray absorption near edge structure (XANES) were employed to gain fundamental insight into the carbonyl and azo chemistries in RAOBs, as well as the cathode electrolyte interphase (CEI) structure. We demonstrated a step-by-step alumination/de-alumination reaction for carbonyl and azo groups in the polymer cathode and unraveled a Al 2 O 3⁻ and AlN-rich CEI, which is critical for the impressive performance of RAOBs.

25 ENERGY STORAGE↗

DOE OSTI2022

Establishing substitution rules of functional groups for high-capacity organic anode materials in Na-ion batteries

Tailoring molecular structures of organic electrode materials (OEMs) can enhance their performance in Na-ion batteries, however, the substitution rules and the consequent effect on the specific capacity and working potential remain elusive. Herein, by examining three sodium carboxylates with selective N substitution or extended conjugation structure, we exploited the correlation between structure and performance to establish substitution rules for high-capacity OEMs. Our results show that substitution position and types of functional groups are essential to create active centers for uptake/removal of Na+ and thermodynamically stabilize organic structures. Furthermore, rational host design and electrolytes modulation were performed to extend the cycle life to 500 cycles. A full cell based on the optimal 2,2’-bipyridine-4,4’-dicarboxylic acid disodium salt anode and the polyaniline cathode is demonstrated to confirm the feasibility of achieving all-organic batteries. Lastly, this work provides a valuable guideline for the design principle of high-capacity and stable OEMs for sustainable energy storage.

25 ENERGY STORAGE↗