Engineering Papers⌕ Search

Engineering topics

Qiang, You

Publications and source records attributed to Qiang, You.

29 records · Page 2

Size dependence of inter- and intra-cluster interactions in core-shell iron-iron oxide nanoclusters

The room temperature magnetic properties of core-shell iron-iron oxide nanoclusters (NCs) synthesized by a cluster deposition system have been investigated, and their dependence on mean cluster size has been discussed. In this study, the surface/boundary spins of clusters were not frozen and were thermally activated during the measurements. The inter-cluster interactions between clusters and intra-cluster interactions between the iron core (ferromagnetic) and iron oxide shell (ferrimagnetic) have been investigated by field dependent isothermal remanent magnetization and dc demagnetization measurements at room temperature. The Henkel plot and delta M plot support the existence of dipolar inter-cluster interactions which become stronger with the growth of cluster size. The derivative of the initial magnetization curve implies that smaller clusters require less field and time than the bigger ones to overcome various energy barriers before aligning along the field direction. Coercive field and magnetization are also correlated with the interaction parameters. To compare the room temperature magnetic results, one system was studied at low temperature, where exchange coupling at the interface between the oxide and metallic phases was observed through bias effect and anisotropy enhancement.

core-shell structure↗

Incorporation of Novel Nanostructured Materials into Solar Cells and Nanoelectronic Devices

Each of the investigators on this project has had significant accomplishments toward the production of semiconductor nanoparticles, particles, and thin films and attempts to incorporate these materials into photovoltaics or sensors; to use them for improving fluorescence diagnostics; or to employ them as cancer fighting agents. The synthesis and characterization of the nanomaterials, and more recently the device construction and testing of these materials, have been the subject of several publications and presentations by team members. During the course of the investigations, several students were fully involved as part of their graduate and undergraduate training. The nature of these projects in material development dictates that the students have gained significant experience in a diverse array of material-related topics.

14 SOLAR ENERGY↗

Conjugates of Actinide Chelator-Magnetic Nanoparticles for Used Fuel Separation Technology

The actinide separation method using magnetic nanoparticles (MNPs) functionalized with actinide specific chelators utilizes the separation capability of ligand and the ease of magnetic separation. This separation method eliminated the need of large quantity organic solutions used in the liquid-liquid extraction process. The MNPs could also be recycled for repeated separation, thus this separation method greatly reduces the generation of secondary waste compared to traditional liquid extraction technology. The high diffusivity of MNPs and the large surface area also facilitate high efficiency of actinide sorption by the ligands. This method could help in solving the nuclear waste remediation problem.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Microstructure of the Native Oxide Layer on Ni and Cr-doped Ni Nanoparticles

Metallic or alloy nanoparticles exposed to air at room temperature will be instantaneously oxidized and covered by an oxide layer. However, for most cases, the true structural nature of the oxide layer formed at this stage is hard to determine. In this paper, we report the structure, morphology, and electronic structure (the density of state of both valence and conduction bands measured by a combination of XPS and EELS) of pure Ni and Cr-doped Ni nanoparticles synthesized using a cluster deposition process. Structural characterization carried out at the atomic level using aberration corrected high resolution transmission electron microscopy (HRTEM) in combination with electron and x-ray diffractions reveals that both pure Ni and Cr-doped Ni particles exposed to air at room temperature similarly possesses a core-shell structure of metal core covered by an oxide layer of typically 1.6 nm in thickness. There exists a critical size of ~ 6 nm, below which the particle is fully oxidized. The oxide particle corresponds to the rock-salt structured NiO and is faceted on the (001) planes. XPS of O-1s shows a strong peak that is attributed to (OH)-, which in combination with the atomic level HRTEM imaging indicates that the very top layer of the oxide is hydrolyzed as Ni(OH)2. Chemical composition analysis using EDS, EELS, and XPS indicates that the Cr dopant at the level of ~ 5at% forms solid solution with the Ni lattice. The Cr shows no segregation on the surface or preferential oxidation during the initial oxidation.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Magnetic stability of He{sup +} ion irradiated FeO+Fe{sub 3}N granular films

Ion irradiation effects on the magnetic properties of FeO+Fe{sub 3}N (iron oxide/iron nitride) granular films are investigated in this study. The FeO+Fe{sub 3}N granular films were prepared using a nanocluster deposition system. The x-ray diffraction data confirm the presence of FeO and Fe{sub 3}N compounds in the prepared granular films. The saturation magnetization (30 emu/g), coercivity (87.9 Oe), and remanence (3.2 emu/g) of these granular films remain unaltered after irradiation with 2 MeV He{sup +} ions to a fluence of 3 x 10{sup 15} ions/cm{sup 2} at room temperature, indicating that the magnetic properties of these granular films are not affected in a highly radioactive environment. This unique property of the magnetic stability may provide promising applications for advanced data storage.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Tuning the Properties of Iron Nanoparticles: Doping Effects on Reactivity and Aging

Predicting and controlling the behaviors nanoparticles in the environment must include understanding the impact of trace elements and impurities (including dopants) on their properties including reactivity and lifetime. The significant impact of many trace elements on the redox activity of iron metal and iron oxide nanoparticles in natural and engineering systems is well established. However, the fundamental mechanisms responsible for specific behaviors and the relationship of the mechanisms to the structural characteristics of the particles and dopants are not as well understood. In addition, the role of trace elements on particle aging and the overall reaction lifetime has not yet received much attention. Here we report the impact of three different processes on the reactivity of iron metal-core oxide-shell nanoparticles with carbon tetrachloride.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Morphology and Electronic Structure of the Oxide Shell on the Surface of Iron Nanoparticles

A iron nanoparticle exposed to air at room temperature will be instantly covered by an oxide shell of typical thickness of ~ 3 nm. This native oxide shell in combination with an underlying iron core determines the physical and chemical behavior of this type of core-shell nanoparticles. One of the great challenges for characterizing this type of nanoparticles is determination of the structure of the oxide shell, as it is FeO, Fe 3 O 4 , γ-Fe 2 O 3 , α-Fe 2 O 3 , or anything else. Significant research effort, mostly based on x-ray diffraction and spectroscopy and electron diffraction and transmission electron microscopy imaging, has been made to determine the structure of this thin layer of iron oxide. Most of the experimental results have been framed with one of the known iron oxide structures, although it is not necessarily true that this thin layer of iron oxide consists of a standard iron oxide. In this paper, the structure of the oxide shell on iron nanoparticle is probed using electron energy loss spectroscopy (EELS) at O K-edge with a spatial resolution of several nanometers (individual particle). Two types of representative particles were studied: particles that are fully oxidized and core-shell particle which possesses a Fe core. We found that the O K-edge spectra collected on the oxide shell in the nanoparticles shows distinctive differences as compared with that of the known iron oxide. Based on finger printing and quantum mechanical calculations results, we conclude that the distances between the absorbing oxygen and the next-nearest neighbor oxygens are more widely distributed than that in bulk Fe 3 O 4 for both of these two types of particles. For smaller and fully oxidized particles, there is also a broadened distribution between the absorbing oxygen and the nearest neighbor oxygens. These results clearly demonstrate that the coordination configuration in the oxide shell on Fe nanoparticle is defective as compared with that of their bulk counterpart. Of the two types particles examined in this work, the degree of disorder is larger for the smaller fully oxidized particles.

36 MATERIALS SCIENCE↗

Microstructures of ZnO films deposited on (0001) and r-cut α-Al2O3 using metal organic chemical vapor deposition

Zinc oxide films were deposited on (0001) and r-cut α-Al2O3 under identical conditions using metal organic chemical vapor deposition. Microstructures of the ZnO films were studied in detail using conventional and high-resolution transmission electron microscopy (HRTEM), electron diffraction, and HRTEM image simulations. The films deposited on these two substrates show distinctive structural differences. The film grown on r-cut α-Al2O3 shows a high quality single crystal with an orientation relationship of α-Al2O3[-101-1]//ZnO[0001] and α-Al2O3(10-1-2)//ZnO(2-1-10). The interface between the film and the substrate was abrupt and decorated with high density of misfit dislocations. Film grown on α-Al2O3 (0001) shows several orientation domains. Typically, one domain correspond to the classic growth model such that α-Al2O3 (0001)//ZnO(0001) and α-Al2O3 [11-20]//ZnO[10-10]. Another domain corresponds to the growth mode such that α-Al2O3 [11-20]//ZnO[10-10] but the (0001) plane of ZnO is tilted relative to the (0001) plane of α-Al2O3 such that ZnO(0001) is almost parallel to the α-Al2O3 (-1104) plane. This orientation reduces the extent of lattice mismatch as compared with the classic growth mode. The interface between ZnO and α-Al2O3 is abrupt and possesses periodic dislocations.

36 MATERIALS SCIENCE↗

Biocompatible core-shell magnetic nanoparticles for cancer treatment

Non-toxic magnetic nanoparticles (MNPs) have expanded the treatment delivery options in the medical world. With a size range from 2 to 200 nm MNPs can be compiled with most of the small cells and tissues in living body. Monodispersive iron-iron oxide core shell nanoparticles were prepared in our novel cluster deposition system. This unique method of preparing the core shell MNPs gives nanoparticles very high magnetic moment. We tested the nontoxicity and uptake of MNPs coated with/without dextrin by incubating them with rat LX-1 small cell lung cancer cells (SCLC). Since core iron enhances the heating effect [7] the rate of oxidation of iron nanoparticles was tested in deionized water at certain time interval. Both coated and noncoated MNPs were successfully uptaken by the cells, indicating that the nanoparticles were not toxic. The stability of MNPs was verified by X-ray diffraction (XRD) scan after 0, 24, 48, 96, 204 hours. Due to the high magnetic moment offered by MNPs produced in our lab, we predict that even in low applied external alternating field desired temperature can be reached in cancer cells in comparison to the commercially available nanoparticles. Moreover, our MNPs do not require additional anti-coagulating agents and provide a cost effective means of treatment with significantly lower dosage in the body in comparison to commercially available nanoparticles.

59 BASIC BIOLOGICAL SCIENCES↗

Characterization Challenges for Nanomaterials

Nanostructured materials are increasingly subject to nearly every type of chemical and physical analysis possible. Because of their small feature size there is a significant focus on tools with high spatial resolution. Because of their high surface area, it is also natural to characterize nanomaterials using tools designed to analyze surfaces. Regardless of the approach, nanostructured materials present a variety of obstacles to adequate, useful and needed analysis. This paper provides short overviews to some of the issues and complications including: particle stability, environmental effects, specimen handling, surface coating, contamination and time. Some specific examples are provided from a our work focused on ceria nanoparticles and iron metal-core/oxide-shell nanoparticles in which we use a combination of tools for routine analysis including XPS, TEM, and XRD and apply other methods as needed to obtain essential information.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Electron Beam Induced Thickening of the Protective Oxide Layer around Fe Nanoparticles

There are many circumstances in science where the process of measuring the properties of a system alters the system. An imaging process can exert an inadvertent effect on the object being observed. Consequently, what we observe does not necessarily represent what had been present before the observation. Normally this effect can be ignored if the consequence of such a change is believed not to be significant. The expansion of nanostructured materials has made high resolution transmission electron microscopy one of the indispensable tools for probing the characteristics of nano-materials. Modification of nanoparticles by the electron beam during their imaging has been widely noticed and this is generally believed to be due to electron beam induced heating effect, defect formation in the particles, charging of the particle, or excitation of surrounding gases. However, an explicit experimental identification of which process dominates is often very hard to establish. We report the thickening of native oxide layer on iron nanoparticle under electron beam irradiation. Based on atomic level imaging, electron diffraction, and computer simulation, we have direct evidence that the protecting oxide layer formed on Fe nanoparticle at room temperature in air continues to grow during an electron beam bombardment in the vacuum system typical of most TEM systems. Partial illumination of a nanoparticle and observation of the shell thickening conclusively demonstrates that many of the mechanisms postulated to explain such processes are not occurring to a significant extent. The observed growth is not related to the electron beam induced heating of the nanoparticle, or residual oxygen ionization, or establishment of an electrical field, rather it is related to electron beam facilitated mass transport across the oxide layer (a defect related process).

36 MATERIALS SCIENCE↗