Engineering Papers⌕ Search

Engineering topics

Pulliam, Thomas H.

Publications and source records attributed to Pulliam, Thomas H..

51 records · Page 3

Tensor-GMRES method for large sparse systems of nonlinear equations

This paper introduces a tensor-Krylov method, the tensor-GMRES method, for large sparse systems of nonlinear equations. This method is a coupling of tensor model formation and solution techniques for nonlinear equations with Krylov subspace projection techniques for unsymmetric systems of linear equations. Traditional tensor methods for nonlinear equations are based on a quadratic model of the nonlinear function, a standard linear model augmented by a simple second order term. These methods are shown to be significantly more efficient than standard methods both on nonsingular problems and on problems where the Jacobian matrix at the solution is singular. A major disadvantage of the traditional tensor methods is that the solution of the tensor model requires the factorization of the Jacobian matrix, which may not be suitable for problems where the Jacobian matrix is large and has a 'bad' sparsity structure for an efficient factorization. We overcome this difficulty by forming and solving the tensor model using an extension of a Newton-GMRES scheme. Like traditional tensor methods, we show that the new tensor method has significant computational advantages over the analogous Newton counterpart. Consistent with Krylov subspace based methods, the new tensor method does not depend on the factorization of the Jacobian matrix. As a matter of fact, the Jacobian matrix is never needed explicitly.

Feng, Dan↗

Accuracy enhancements for overset grids using a defect correction approach

A defect-correction approach is investigated as a means of enhancing the accuracy of flow computations on overset grids. Typically, overset-grid techniques process and pass information only at grid boundaries. In the current approach, error corrections at all overlapped interior points are injected between grids by using a defect-correction scheme. In some cases this is found to enhance the overall accuracy of the overset-grid method. Locally refined overset grids can be used to provide an efficient solution-adaptation method. The defect correction can also be ultilized as an error-correction technique for a coarse grid by evaluating the residual using a fine base grid, but solving the implicit equations only on the coarse grid. Numerical examples include an accuracy and dissipation study of an unsteady decaying vortex flow, the flow over a NACA 0012 airfoil, and the flow over a mulit-element high-lift airfoil.

Rogers, Stuart E.↗

Transition to chaos in an open unforced 2D flow

The present numerical study of unsteady, low Reynolds number flow past a 2D airfoil attempts to ascertain the bifurcation sequence leading from simple periodic to complex aperiodic flow with rising Reynolds number, as well as to characterize the degree of chaos present in the aperiodic flow and assess the role of numerics in the modification and control of the observed bifurcation scenario. The ARC2D Navier-Stokes code is used in an unsteady time-accurate mode for most of these computations. The system undergoes a period-doubling bifurcation to chaos as the Reynolds number is increased from 800 to 1600; its chaotic attractors are characterized by estimates of the fractal dimension and partial Liapunov exponent spectra.

Pulliam, Thomas H.↗

Time accuracy and the use of implicit methods

Some of the approximations used to make implicit methods more efficient and practical for the solution of the Euler and Navier-Stokes equations are addressed. In particular, approximate factorizations, diagonalizations, and linearization approximations are reviewed and categorized. A subiteration correction scheme commonly in use at present is introduced, improved, demonstrated, and analyzed. This scheme is used to produce a second-order accurate, more robust implicit method for unsteady flow computations. The subiteration approach can be employed to recover time accuracy without increasing computational time (in most cases producing substantial savings).

Pulliam, Thomas H.↗

Computational challenge - Euler solution for ellipses

The present treatment of the inviscid flow past an ellipse via the numerical solution of the Euler equations yields a lifting solution for any combination of grid and/or angle of attack which is nonsymmetric, in order to illustrate the CFD challenge posed by this unusual flow behavior. The results obtained call into question the general capability and validity of numerical Euler results in the realm of conventional difference methods; specifically, the mechanism generating lifting results is not understood, and the problem's resolution is not yet in sight.

Pulliam, Thomas H.↗

An introduction to chaos theory in CFD

The popular subject 'chaos theory' has captured the imagination of a wide variety of scientists and engineers. CFD has always been faced with nonlinear systems and it is natural to assume that nonlinear dynamics will play a role at sometime in such work. This paper will attempt to introduce some of the concepts and analysis procedures associated with nonlinear dynamics theory. In particular, results from computations of an airfoil at high angle of attack which exhibits a sequence of bifurcations for single frequency unsteady shedding through period doublings cascading into low dimensional chaos are used to present and demonstrate various aspects of nonlinear dynamics in CFD.

Pulliam, Thomas H.↗

Low Reynolds number numerical solutions of chaotic flow

Numerical computations of two-dimensional flow past an airfoil at low Mach number, large angle of attack, and low Reynolds number are reported which show a sequence of flow states leading from single-period vortex shedding to chaos via the period-doubling mechanism. Analysis of the flow in terms of phase diagrams, Poincare sections, and flowfield variables are used to substantiate these results. The critical Reynolds number for the period-doubling bifurcations is shown to be sensitive to mesh refinement and the influence of large amounts of numerical dissipation. In extreme cases, large amounts of added dissipation can delay or completely eliminate the chaotic response. The effect of artificial dissipation at these low Reynolds numbers is to produce a new effective Reynolds number for the computations.

Pulliam, Thomas H.↗

A computational challenge - Euler solution for ellipses

The Euler equations for flow past an ellipse are solved numerically. A computationally complex problem involving inviscid flow past an elliptical two-dimensional surface at subcritical Mach number and angle of attack is introduced. A lifting solution for any combination of grid and/or angle of attack which is nonsymmetric is obtained.

Pulliam, Thomas H.↗

Implicit methods in CFD

A class of implicit approximate factorization schemes is examined for stability and convergence characteristics. These schemes include Newton's method, factorization, and flux-vector splitting. Examples are used to show that all practical methods suffer from some limited stability or asymptotic convergence restriction. A three-dimensional factored scheme is shown which suffers from unconditional instability which can only be ameliorated by added artificial dissipation. An F3D + or - flux split scheme is described which avoids unconditional instability, but in the end has similar convergence characteristics.

Pulliam, Thomas H.↗

Navier-Stokes computations for circulation control airfoils

Navier-Stokes computations of subsonic to transonic flow past airfoils with augmented lift due to rearward jet blowing over a curved trailing edge are presented. The approach uses a spiral grid topology. Solutions are obtained using a Navier-Stokes code which employs an implicit finite difference method, an algebraic turbulence model, and developments which improve stability, convergence, and accuracy. Results are compared against experiments for no jet blowing and moderate jet pressures and demonstrate the capability to compute these complicated flows.

Pulliam, Thomas H.↗

Viscous transonic airfoil workshop results using ARC2D

Computations have been performed in response to the Viscous Transonic Airfoil Workshop associated with the AIAA 25th Aerospace Sciences Meeting (January 1987). The purpose of the workshop is to establish the capabilities of various methods for computing viscous flowfields for a range of conditions and geometries. The results of the test cases will demonstrate the capabilities of the methods in predicting both aerodynamic trends and flowfield details. ARC2D, a well-established Navier-Stokes code, was used to compute the flowfields for the designated airfoils, Mach numbers, angles of attack and other specifications of the Workshop committee.

Maksymiuk, Catherine M.↗

Needs and status of CFD code validation

The two types of Computational Fluid Dynamics code validations, solution-to-solution comparison and solution-to-experiment comparison, are discussed. It is suggested that to develop more detailed experiments the following things are necessary: (1) further development of turbulence models; (2) better methods for numerical validation of CFD codes; (3) evaluation of disagreements; and (4) continued determination of experimental scatter. All data and results are presented in viewgraph form.

Holst, Terry L.↗

Implicit solution methods in computational fluid dynamics

A class of implicit finite difference schemes of the Beam and Warming approximate factorization type will be addressed. The development and analysis of various aspects of this class of schemes will be given along with the motivations behind many of the choices. Various acceleration and efficiency modifications such as matrix reduction, diagonalization and flux split schemes will be presented. The methods are demonstrated in fully vectorized codes for a CRAY type architecture. The emphasis will be on the Euler equations in generalized coordinates.

Pulliam, Thomas H.↗

Implicit Finite-Difference Simulations of Three-Dimensional Compressible Flow

An implicit finite-difference procedure for unsteady three-dimensional flow capable of handling arbitrary geometry through the use of general coordinate transformations is described. Viscous effects are optionally incorporated with a "thin-layer" approximation of the Navier-Stokes equations. An implicit approximate factorization technique is employed so that the small grid sizes required for spatial accuracy and viscous resolution do not impose stringent stability limitations. Results obtained from the program include transonic inviscid or viscous solutions about simple body configurations. Comparisons with existing theories and experiments are made. Numerical accuracy and the effect of three-dimensional coordinate singularities are also discussed.

Pulliam, Thomas H.↗