Engineering Papers⌕ Search

Engineering topics

Pulliam, T. H.

Publications and source records attributed to Pulliam, T. H..

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2017

CFD Analysis in Advance of the NASA Juncture Flow Experiment

NASA through its Transformational Tools and Technologies Project (TTT) under the Advanced Air Vehicle Program, is supporting a substantial effort to investigate the formation and origin of separation bubbles found on wing-body juncture zones. The flow behavior in these regions is highly complex, difficult to measure experimentally, and challenging to model numerically. Multiple wing configurations were designed and evaluated using Computational Fluid Dynamics (CFD), and a series of wind tunnel risk reduction tests were performed to further down-select the candidates for the final experiment. This paper documents the CFD analysis done in conjunction with the 6 percent scale risk reduction experiment performed in NASA Langley's 14- by 22-Foot Subsonic Tunnel. The combined CFD and wind tunnel results ultimately helped the Juncture Flow committee select the wing configurations for the final experiment.

Flow Experiment↗
NASA NTRS2017

Boundary Condition Study for the Juncture Flow Experiment in the NASA Langley 14x22-Foot Subsonic Wind Tunnel

Because future wind tunnel tests associated with the NASA Juncture Flow project are being designed for the purpose of CFD validation, considerable effort is going into the characterization of the wind tunnel boundary conditions, particularly at inflow. This is important not only because wind tunnel flowfield nonuniformities can play a role in integrated testing uncertainties, but also because the better the boundary conditions are known, the better CFD can accurately represent the experiment. This paper describes recent investigative wind tunnel tests involving two methods to measure and characterize the oncoming flow in the NASA Langley 14- by 22-Foot Subsonic Tunnel. The features of each method, as well as some of their pros and cons, are highlighted. Boundary conditions and modeling tactics currently used by CFD for empty-tunnel simulations are also described, and some results using three different CFD codes are shown. Preliminary CFD parametric studies associated with the Juncture Flow model are summarized, to determine sensitivities of the flow near the wing-body juncture region of the model to a variety of modeling decisions.

Rumsey, C. L.↗
NASA NTRS2017

CFD Analysis in Advance of the NASA Juncture Flow Experiment

NASA through its Transformational Tools and Technologies Project (TTT) under the Advanced Air Vehicle Program, is supporting a substantial effort to further investigate the formation and origin of separation bubbles found on wing-body juncture zones. The flow behavior in these regions is highly complex, difficult to measure experimentally, and challenging to model numerically. Multiple wing configurations were designed and evaluated using Computational Fluid Dynamics (CFD), and a series of wind tunnel risk reduction tests were performed to further down-select the candidates for the final experiment. This paper documents the CFD analysis done in conjunction with the 6 percent scale risk reduction experiment performed in NASA Langley’s 14- by 22-Foot Subsonic Tunnel. The combined CFD and wind tunnel results ultimately help the Juncture Flow committee select the wing configurations for the final experiment.

Lee, H. C.↗
NASA NTRS2004

On the Use of CAD and Cartesian Methods for Aerodynamic Optimization

The objective for this paper is to present the development of an optimization capability for Curt3D, a Cartesian inviscid-flow analysis package. We present the construction of a new optimization framework and we focus on the following issues: 1) Component-based geometry parameterization approach using parametric-CAD models and CAPRI. A novel geometry server is introduced that addresses the issue of parallel efficiency while only sparingly consuming CAD resources; 2) The use of genetic and gradient-based algorithms for three-dimensional aerodynamic design problems. The influence of noise on the optimization methods is studied. Our goal is to create a responsive and automated framework that efficiently identifies design modifications that result in substantial performance improvements. In addition, we examine the architectural issues associated with the deployment of a CAD-based approach in a heterogeneous parallel computing environment that contains both CAD workstations and dedicated compute engines. We demonstrate the effectiveness of the framework for a design problem that features topology changes and complex geometry.

Nemec, M.↗
NASA NTRS2002

Comparison of Evolutionary (Genetic) Algorithm and Adjoint Methods for Multi-Objective Viscous Airfoil Optimizations

A comparison between an Evolutionary Algorithm (EA) and an Adjoint-Gradient (AG) Method applied to a two-dimensional Navier-Stokes code for airfoil design is presented. Both approaches use a common function evaluation code, the steady-state explicit part of the code,ARC2D. The parameterization of the design space is a common B-spline approach for an airfoil surface, which together with a common griding approach, restricts the AG and EA to the same design space. Results are presented for a class of viscous transonic airfoils in which the optimization tradeoff between drag minimization as one objective and lift maximization as another, produces the multi-objective design space. Comparisons are made for efficiency, accuracy and design consistency.

Pulliam, T. H.↗
NASA NTRS1999

A Textbook for a First Course in Computational Fluid Dynamics

This paper describes and discusses the textbook, Fundamentals of Computational Fluid Dynamics by Lomax, Pulliam, and Zingg, which is intended for a graduate level first course in computational fluid dynamics. This textbook emphasizes fundamental concepts in developing, analyzing, and understanding numerical methods for the partial differential equations governing the physics of fluid flow. Its underlying philosophy is that the theory of linear algebra and the attendant eigenanalysis of linear systems provides a mathematical framework to describe and unify most numerical methods in common use in the field of fluid dynamics. Two linear model equations, the linear convection and diffusion equations, are used to illustrate concepts throughout. Emphasis is on the semi-discrete approach, in which the governing partial differential equations (PDE's) are reduced to systems of ordinary differential equations (ODE's) through a discretization of the spatial derivatives. The ordinary differential equations are then reduced to ordinary difference equations (O(Delta)E's) using a time-marching method. This methodology, using the progression from PDE through ODE's to O(Delta)E's, together with the use of the eigensystems of tridiagonal matrices and the theory of O(Delta)E's, gives the book its distinctiveness and provides a sound basis for a deep understanding of fundamental concepts in computational fluid dynamics.

Zingg, D. W.↗
NASA NTRS1993

Instabilities of two-dimensional inviscid compressible vortices

An investigation of the linear stability and subsequent nonlinear evolution and acoustic radiation of a planar inviscid compressible vortex is presented. The effects of the entropy gradient are investigated, and for the particular entropy profile chosen, the positive average entropy in the vortex core is destabilizing, while the opposite is true for the negative average entropy gradient. Finite-difference methods are used to study the linear initial value problem. These methods are found to be capable of accurately computing the frequencies and weak growth rates of the normal modes. When the initial condition consists of random perturbations, the long-time behavior is found to correspond to the most unstable normal mode in all cases. The numerical solution of the Euler equations is used to study the nonlinear development of an elliptic-mode perturbation.

Chan, W. M.↗
NASA NTRS1992

Comparison Of Two Viscous-Flow Computer Codes

Two viscous-flow computer codes compared by applying them to five test cases of steady-state transonic viscous flows about transonic airfoils. Two codes were: FLOMG, which solves Navier-Stokes differential equations of flow by implementing explicit, Runge-Kutta, finite-volume, multigrid numerical-integration algorithm; and ARC2D, which implements implicit, finite-difference, approximate-factorization, eigenvector-diagonalization numerical-integration algorithm.

Maksymiuk, C. M.↗
NASA NTRS1990

A comparison of two central difference schemes for solving the Navier-Stokes equations

Five viscous transonic airfoil cases were computed by two significantly different computational fluid dynamics codes: An explicit finite-volume algorithm with multigrid, and an implicit finite-difference approximate-factorization method with Eigenvector diagonalization. Both methods are described in detail, and their performance on the test cases is compared. The codes utilized the same grids, turbulence model, and computer to provide the truest test of the algorithms. The two approaches produce very similar results, which, for attached flows, also agree well with experimental results; however, the explicit code is considerably faster.

Maksymiuk, C. M.↗
NASA NTRS1988

Analysis of the convergence history of flow through nozzles with shocks

Acceleration techniques such as Wynn's (1986) epsilon algorithm and analysis techiques such as eigensystem analysis are used here to study numerically the convergence properties of an iterative scheme applied to the quasi-one-dimensional Euler and Navier-Stokes equations for flow through nozzles with shocks. The convergence and stability properties are studied by analyzing the dependence of convergence of the code on the discretization technique, boundary conditions, time-step, number of grid points, and the physics of the problem.

Cheer, A. Y.↗
NASA NTRS1986

Perturbation Method for Computational Fluid-Dynamical Equations

Perturbation technique yields accurate flow solutions using as few as one-fourth number of grid points required by finite-difference methods. Technique originally developed to solve Euler equations of two-dimensional, steady, inviscid transonic flow about airfoils, applicable to arbitrary equation sets and higher dimensions. New perturbations scheme used in design cycle where potential solutions generated routinely; Euler perturbation method used in second-cut analysis. Method also used to couple other equation sets.

Chow, L. J.↗
NASA NTRS1986

Efficient solution methods for the Navier-Stokes equations

Implicit finite difference schemes for solving two-dimensional and three-dimensional Euler and thin layer Navier-Stokes equations are addressed. The methods are demonstrated in fully vectorized codes for a Cray type architecture. The Beam and Warming implicit approximate factorization algorithm in generalized coordinates is used. The methods are either time accurate or accelerated non-time accurate steady state schemes. Acceleration and efficiency modifications such as matrix reduction, diagonalization, and flux split schemes are presented. Two dimensional inviscid and viscous calculations (e.g., airfoils with a deflected spoiler, circulation control airfoils, and unsteady buffeting) and of three dimensional viscous elliptical bodies, exhausting boattails, and generic oblique wing computations are discussed.

Pulliam, T. H.↗
NASA NTRS1986

Navier-Stokes computations for circulation controlled airfoils

Navier-Stokes computations of subsonic to transonic flow past airfoils with augmented lift due to rearward jet blowing over a curved trailing edge are presented. The approach uses a spiral grid topology. Solutions are obtained using a Navier-Stokes code which employs an implicit finite difference method, an algebraic turbulence model, and developments which improve stability, convergence, and accuracy. Results are compared against experiments for no jet blowing and moderate jet pressures and demonstrate the capability to compute these complicated flows.

Pulliam, T. H.↗
NASA NTRS1986

Navier-Stokes computations for exotic airfoils

A hyperbolic grid generator with improvements for handling sharp corners and concave surfaces combined with a Navier-Stokes flow solver is applied to complex two dimensional airfoil configurations. Steady separated flow about an iced leading edge of an airfoil is presented. Unsteady viscous separated flows past an airfoil at two angles of attack with a spoiler deployed at 60 deg are compared with experiment. The spoiler computations are performed with two different topological maps of the physical domain to the computational domain. Graphical techniques for the static and unsteady display of the flow fields are discussed.

Barth, T. J.↗
NASA NTRS1986

The computation of steady 3-D separated flows over aerodynamic bodies at incidence and yaw

This paper describes the implementation of a general purpose 3-D NS code and its application to simulated 3-D separated vortical flows over aerodynamic bodies. The thin-layer Reynolds-averaged NS equations are solved by an implicit approximate factorization scheme. The pencil data structure enables the code to run on very fine grids using only limited incore memories. Solutions of a low subsonic flow over an inclined ellipsoid are compared with experimental data to validate the code. Transonic flows over a yawed elliptical wing at incidence are computed and separations occurred at different yaw angles are discussed.

Pulliam, T. H.↗
NASA NTRS1985

Euler computations of AGARD Working Group 07 airfoil test cases

In an attempt to provide a set of accurate standard test problems for computational code developers, a series of inviscid airfoil test cases were chosen by the AGARD Working Group 07, a subpanel of the AGARD Fluid Dynamics Panel. The cases include three different airfoils at transonic to supersonic conditions. A large number of international experts responded in this effort with computations that have been contrasted for accuracy and consistency. This paper is a summary of the authors' contribution to this study. In particular, the important aspects of the solution process that made it possible to obtain the high level of accuracy needed in this study are stressed.

Pulliam, T. H.↗
NASA NTRS1985

Navier-Stokes computations for exotic airfoils

An efficient hyperbolic grid generator with improvements for handling sharp corners and concave surfaces is combined with an efficient and accurate Navier-Stokes flow solver. This combination is applied to some rather complex two-dimensional airfoil configurations. Steady separated flow about an iced leading edge of an airfoil is presented. Unsteady viscous separated flows past an airfoil at two angles of attack with a spoiler deployed at 60 degrees are presented and compared with experiment. The spoiler computations are performed with two different topological maps of the physical domain to the computational domain. Innovative graphical techniques for both the static and unsteady display of the flow fields are presented and discussed.

Barth, T. J.↗