Engineering Papers⌕ Search

Engineering topics

Ptitsyn, V.

Publications and source records attributed to Ptitsyn, V..

105 records · Page 6

Polarized proton beam for eRHIC

RHIC has provided polarized proton collisions from 31 GeV to 255 GeV in the past decade. To preserve polarization through numerous depolarizing resonances through the whole accelerator chain, harmonic orbit correction, partial snakes, horizontal tune jump system and full snakes have been used. In addition, close attentions have been paid to betatron tune control, orbit control and beam line alignment. The polarization of 60% at 255 GeV has been delivered to experiments with 1.8×10 11 bunch intensity. For the eRHIC era, the beam brightness has to be maintained to reach the desired luminosity. Since we only have one hadron ring in the eRHIC era, existing spin rotator and snakes can be converted to six snake configuration for one hadron ring. With properly arranged six snakes, the polarization can be maintained at 70% at 250 GeV. This paper summarizes the effort and plan to reach high polarization with small emittance for eRHIC.

43 PARTICLE ACCELERATORS↗

ERL with non-scaling fixed field alternating gradient lattice for eRHIC

The proposed eRHIC electron-hadron collider uses a "non-scaling FFAG" (NS-FFAG) lattice to recirculate 16 turns of different energy through just two beam lines located in the RHIC tunnel. This paper presents lattices for these two FFAGs that are optimized for low magnet field and to minimize total synchrotron radiation across the energy range. The higher number of recirculations in the FFAG allows a shorter linac (1.322GeV) to be used, drastically reducing cost, while still achieving a 21.2 GeV maximum energy to collide with one of the existing RHIC hadron rings at up to 250GeV. eRHIC uses many cost-saving measures in addition to the FFAG: the linac operates in energy recovery mode, so the beams also decelerate via the same FFAG loops and energy is recovered from the interacted beam. All magnets will be constructed from NdFeB permanent magnet material, meaning chillers and large magnet power supplies are not needed. This paper also describes a small prototype ERL-FFAG accelerator that will test all of these technologies in combination to reduce technical risk for eRHIC.

43 PARTICLE ACCELERATORS↗

Calculation of spin resonance harmonics in an accelerator with Snakes

In this work, the ASPIRRIN code has been extended to provide the calculation of resonance harmonics for the case of machine with Siberian Snakes and spin rotators. Examples are shown for RHIC accelerator, including the case of the configuration with six Snakes per RHIC ring.

43 PARTICLE ACCELERATORS↗

Re-Visit Local Coupling Correction in the Interaction Regions of RHIC

In this article we will re-visit the local coupling correction in the interaction regions (IRs) of the Relativistic Heavy Ion Collider (RHIC). We will review the measurement data of triplet quadrupole rolls, the local coupling correction strengths in the RHIC control system, and the methods for the local coupling correction with local skew quadrupole correctors. Based on the in-turnnel measurement data of triplet roll errors in 2011, we will analytically calculate and simulate IR-bump method to find out the local skew correction strengths and compare them at store and at injection with the Blue and Yellow ring lattices in the 2011 polarized proton (p-p) and Au-Au runs. The vertical dispersion from the triplet roll errors, local and global coupling correction skew quadrupoles, and the vertical dipole correctors are calculated and discussed.

43 PARTICLE ACCELERATORS↗

Beam-Beam issues in eRHIC

eRHIC, a future electron-ion collider developed at BNL, aims to provide electron-ion collisions by adding a new electron accelerator to the existing RHIC ion accelerator rings [1]. Possible options for accelerating high average current electron beam include an energy-recovery linac (ERL) or a storage ring. Since the proton beam is circulating in the accelerator ring, corresponding collision schemes are called as the linac-ring and the ring-ring. The electron accelerator option based on the electron storage ring was studied on earlier stages of eRHIC design [2].

43 PARTICLE ACCELERATORS↗