Engineering Papers⌕ Search

Engineering topics

Prakapenka, V

Publications and source records attributed to Prakapenka, V.

At least 19 records

Anharmonicity-induced first-order isostructural phase transition of zirconium under pressure

We have performed a detailed x-ray diffraction structural study of Zr under pressure and unambiguously identify the existence of a first-order isostructural bcc-to-bcc phase transition near 58 GPa. First-principles quantum molecular dynamics calculations support the existence of this phase transition, in excellent agreement with experimental results, triggered by anharmonic effects. Lastly, our results highlight the potential ubiquity of anharmonically driven isostructural transitions within the periodic table under pressure and call for follow-up experimental and theoretical studies.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Equation of state and phase diagram of Fe-16Si alloy as a candidate component of Earth's core

The outer core of the Earth contains several weight percent of one or more unknown light elements, which may include silicon. Therefore it is critical to understand the high pressure–temperature properties and behavior of an iron–silicon alloy with a geophysically relevant composition (16 wt% silicon). We experimentally determined the melting curve, subsolidus phase diagram, and equations of state of all phases of Fe–16 wt%Si to 140 GPa, finding a conversion from the D0 3 crystal structure to a B2+hcp mixture at high pressures. The melting curve implies that 3520 K is a minimum temperature for the Earth's outer core, if it consists solely of Fe–Si alloy, and that the eutectic composition in the Fe–Si system is less than 16 wt% silicon at core–mantle boundary conditions. Comparing our new equation of state to that of iron and the density of the core, we find that for an Fe–Ni–Si outer core, 11.3±1.5 wt% silicon would be required to match the core's observed density at the core–mantle boundary. We have also performed first-principles calculations of the equations of state of Fe 3 Si with the D0 3 structure, hcp iron, and FeSi with the B2 structure using density-functional theory.

Fischer, Rebecca A↗

Is iron at the Earth's core conditions hcp-structured?

Iron is the main component of the Earth's core and its structure and properties are important for interpretation of geophysical observations and modeling dynamics of the core. We argue that the diffraction lines in the high temperature high pressure X-ray diffraction pattern, presented by Tateno et al., 2010 and interpreted as those of solely hot hcp-Fe, correspond indeed to the insufficiently heated part of the sample. We show that observed diffraction spots are either due to bcc-Fe or carbides.

58 GEOSCIENCES↗

4-Diamond Formation from Amorphouse Carbon and Graphite in the Presence of COH Fluids : An InSitu High-Pressure and -Temperature Laser-Heated Diamond Anvil Cell Experimental Study

Microdiamonds from orogenic belts contain nanometer-size fluid inclusions suggesting diamond formation from supercritical carbon - oxygen - hydrogen (COH) fluids. Here we report experimental results of diamond nucleation from amorphous carbon and polycrystalline graphite in the presence of COH fluids in a laser-heated diamond anvil cell. Our results show that: (i) diamonds can nucleate from graphite or amorphous carbon at pressures of 9-11 GPa and temperatures of 1200-1400 K in the presence of COH fluids; (ii) it is easier to nucleate diamond from amorphous carbon than from graphite with or without the COH fluids; and (iii) the fluid from decomposition of glucose is more efficient in promoting the graphite-to-diamond transformation than the fluid from decomposition of oxalic acid dihydrate. Carbon crystallinity has strong effects on the kinetics of diamond nucleation and growth. The experimental results demonstrated the critical role of presence and composition of supercritical COH fluids for promoting the graphite-to-diamond transformation.

08 HYDROGEN↗

Siderite at lower mantle conditions and the effects of the pressure-induced spin-pairing transition

Siderite (FeCO{sub 3}) forms a complete solid solution with magnesite (MgCO{sub 3}), the most likely candidate for a mantle carbonate. Our experiments with natural siderite reveal spin pairing of d-orbital electrons of Fe{sup 2+} at 43 GPa, as evidenced by a sharp volume collapse of about 10%. The initially colorless crystals assume an intense green color after the transition, which progressively turns to red above 60 GPa. We present clear evidence for the instability of an intermediate spin state in siderite at ambient temperature. At the transition pressure, domains of high and low spin siderite coexist. The unit cell volume difference between magnesite and siderite is significantly decreased by the spin transition, enhancing the solubility between the two calcite-type minerals. A siderite component in magnesite at lower mantle pressure would significantly increase its density and slightly increase the carbonate bulk modulus.

58 GEOSCIENCES↗

Thickness and Clapeyron slope of the post-perovskite boundary

The thicknesses and Clapeyron slopes of mantle phase boundaries strongly influence the seismic detectability of the boundaries and convection in the mantle. The unusually large positive Clapeyron slope found for the boundary between perovskite (Pv) and post-perovskite (pPv) (the 'pPv boundary') would destabilize high-temperature anomalies in the lowermost mantle, in disagreement with the seismic observations. Here we report the thickness of the pPv boundary in (Mg{sub 0.91}Fe{sub 0.09}{sup 2+})SiO{sub 3} and (Mg{sub 0.9}Fe{sub 0.1}{sup 3+})(Al{sub 0.1}Si{sub 0.9})O{sub 3} as determined in a laser-heated diamond-anvil cell under in situ high-pressure (up to 145 GPa), high-temperature (up to 3,000 K) conditions. The measured Clapeyron slope is consistent with the D'' discontinuity. In both systems, however, the pPv boundary thickness increases to 400-600 {+-} 100 km, which is substantially greater than the thickness of the D'' discontinuity (<30 km). Although the Fe{sup 2+} buffering effect of ferropericlase could decrease the pPv boundary thickness, the boundary may remain thick in a pyrolitic composition because of the effects of Al and the rapid temperature increase in the D'' layer. The pPv boundary would be particularly thick in regions with an elevated Al content and/or a low Mg/Si ratio, reducing the effects of the large positive Clapeyron slope on the buoyancy of thermal anomalies and stabilizing compositional heterogeneities in the lowermost mantle. If the pPv transition is the source of the D'' discontinuity, regions with sharp discontinuities may require distinct compositions, such as a higher Mg/Si ratio or a lower Al content.

58 GEOSCIENCES↗

Portable laser-heating system for diamond anvil cells

The diamond anvil cell (DAC) technique coupled with laser heating has become the most successful method for studying materials in the multimegabar pressure range at high temperatures. However, so far all DAC laser-heating systems have been stationary: they are linked either to certain equipment or to a beamline. Here, a portable laser-heating system for DACs has been developed which can be moved between various analytical facilities, including transfer from in-house to a synchrotron or between synchrotron beamlines. Application of the system is demonstrated in an example of nuclear inelastic scattering measurements of ferropericlase (Mg{sub 0.88}Fe{sub 0.12})O and h.c.p.-Fe{sub 0.9}Ni{sub 0.1} alloy, and X-ray absorption near-edge spectroscopy of (Mg{sub 0.85}Fe{sub 0.15})SiO{sub 3} majorite at high pressures and temperatures. Our results indicate that sound velocities of h.c.p.-Fe{sub 0.9}Ni{sub 0.1} at pressures up to 50 GPa and high temperatures do not follow a linear relation with density.

43 PARTICLE ACCELERATORS↗

High-Pressure Behavior of Perovskite: FeTiO[subscript 3] Dissociation into (Fe[subscript 1-delta]Ti[subscript delta])O and Fe[subscript 1+delta]Ti[subscript 2-delta]O[subscript 5]

The stability of perovskite-structured materials at high pressure and temperature is of fundamental interest in solid-state physics, chemistry, and the geosciences. As an alternative to decomposition into oxides or transformation of the CaIrO{sub 3} postperovskite structure, we observe in situ the breakdown of FeTiO{sub 3} perovskite into a (Fe{sub 1-{delta}},Ti{sub {delta}})O+Fe{sub 1+{delta}}Ti{sub 2-{delta}}O{sub 5} assemblage beyond 53 GPa and 2000 K. The high-pressure high-temperature phase of Fe{sub 1+{delta}}Ti{sub 2-{delta}}O{sub 5} with a new structure (space group C2/c) could be preserved on decompression to 9 GPa, and amorphizes under further pressure release. Our study demonstrates that perovskite-structured materials can undergo chemical changes and form complex oxides with new structures, rather than only transform to denser polymorphs or decompose to simple oxides.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Iron oxidation state of FeTiO[subscript 3] under high pressure

The oxidation state of iron in FeTiO{sub 3} under high pressure was investigated by combining x-ray diffraction, Moessbauer spectroscopy, x-ray-absorption spectroscopy, and density-functional theory based calculations. Our results demonstrate that the ilmenite-to-perovskite phase transition occurs above 20 GPa at room temperature and on compression two phases coexist to 40 GPa. The Fe{sup 3+}/{Sigma}Fe ratio increases up to 16 GPa, probably attributed to the d-electron drifting of cations via the oxygen bridge in the adjacent octahedral, then decreases at higher pressure due to the ilmenite-to-perovskite phase transition accompanied by a slight decrease in iron valence state. Our ab initio calculations further show that the most significant changes in the charge distribution in FeTiO{sub 3} are associated with Ti and O.

36 MATERIALS SCIENCE↗

High quality x-ray absorption spectroscopy measurements with long energy range at high pressure using diamond anvil cell

We describe an approach for acquiring high quality x-ray absorption fine structure (XAFS) spectroscopy spectra with wide energy range at high pressure using diamond anvil cell (DAC). Overcoming the serious interference of diamond Bragg peaks is essential for combining XAFS and DAC techniques in high pressure research, yet an effective method to obtain accurate XAFS spectrum free from DAC induced glitches has been lacking. It was found that these glitches, whose energy positions are very sensitive to the relative orientation between DAC and incident x-ray beam, can be effectively eliminated using an iterative algorithm based on repeated measurements over a small angular range of DAC orientation, e.g., within {+-}3{sup o} relative to the x-ray beam direction. Demonstration XAFS spectra are reported for rutile-type GeO{sub 2} recorded by traditional ambient pressure and high pressure DAC methods, showing similar quality at 440 eV above the absorption edge. Accurate XAFS spectra of GeO{sub 2} glass were obtained at high pressure up to 53 GPa, providing important insight into the structural polymorphism of GeO{sub 2} glass at high pressure. This method is expected be applicable for in situ XAFS measurements using a diamond anvil cell up to ultrahigh pressures.

36 MATERIALS SCIENCE↗

Superhard Semiconducting Optically Transparent High Pressure Phase of Boron

An orthorhombic (space group Pnnm) boron phase was synthesized at pressures above 9 GPa and high temperature, and it was demonstrated to be stable at least up to 30 GPa. The structure, determined by single-crystal x-ray diffraction, consists of B{sub 12} icosahedra and B{sub 2} dumbbells. The charge density distribution obtained from experimental data and ab initio calculations suggests covalent chemical bonding in this phase. Strong covalent interatomic interactions explain the low compressibility value (bulk modulus is K{sub 300} = 227 GPa) and high hardness of high-pressure boron (Vickers hardness H{sub v} = 58 GPa), after diamond the second hardest elemental material.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

In-situ X-ray diffraction measurements of the [gamma-epsilon] transition boundary of iron in an internally-heated diamond anvil cell

The phase transition boundary between the {gamma} (face-centered cubic structure) and {epsilon} (hexagonal close-packed structure) iron phases was determined up to 69 GPa by using a newly developed internally-heated diamond anvil cell, combined with in-situ synchrotron X-ray diffraction measurements. The improved experimental configuration provides stable heating with reliable temperature and pressure determination and phase identification. A simultaneous laser- and internal-heating system was also used to produce further higher temperature at higher pressures. The sample pressure at any given temperature was calculated using an established thermal equation of state for {epsilon} iron. The {gamma}-{epsilon} transition boundary was bracketed with the normal and reversal directions and it is linear from 21 to 69 GPa with a dP/dT slope of 0.0394 GPa/K. There is no evidence for the existence of additional iron solid phase other than the {gamma} and {epsilon} phases over the P-T range of this study. We inferred that the {gamma}-{epsilon}-liquid triple point of iron should occur at 88 GPa and 2800 K.

36 MATERIALS SCIENCE↗

Transparent dense sodium

Under pressure, metals exhibit increasingly shorter interatomic distances. Intuitively, this response is expected to be accompanied by an increase in the widths of the valence and conduction bands and hence a more pronounced free-electron-like behaviour. But at the densities that can now be achieved experimentally, compression can be so substantial that core electrons overlap. This effect dramatically alters electronic properties from those typically associated with simple free-electron metals such as lithium and sodium, leading in turn to structurally complex phases and superconductivity with a high critical temperature. But the most intriguing prediction- that the seemingly simple metals Li and Na will transform under pressure into insulating states, owing to pairing of alkali atoms - has yet to be experimentally confirmed. Here we report experimental observations of a pressure-induced transformation of Na into an optically transparent phase at {approx}200 GPa (corresponding to {approx}5.0-fold compression). Experimental and computational data identify the new phase as a wide bandgap dielectric with a six-coordinated, highly distorted double-hexagonal close-packed structure. We attribute the emergence of this dense insulating state not to atom pairing, but to p-d hybridizations of valence electrons and their repulsion by core electrons into the lattice interstices. We expect that such insulating states may also form in other elements and compounds when compression is sufficiently strong that atomic cores start to overlap strongly.

36 MATERIALS SCIENCE↗

Electronic and magnetic structures of the postperovskite-type Fe{sub 2}O{sub 3} and implications for planetary magnetic records and deep interiors.

Recent studies have shown that high pressure (P) induces the metallization of the Fe{sup 2+}-O bonding, the destruction of magnetic ordering in Fe, and the high-spin (HS) to low-spin (LS) transition of Fe in silicate and oxide phases at the deep planetary interiors. Hematite (Fe{sub 2}O{sub 3}) is an important magnetic carrier mineral for deciphering planetary magnetism and a proxy for Fe in the planetary interiors. Here, we present synchrotron Moessbauer spectroscopy and X-ray diffraction combined with ab initio calculations for Fe{sub 2}O{sub 3} revealing the destruction of magnetic ordering at the hematite {yields} Rh{sub 2}O{sub 3}-II type (RhII) transition at 70 GPa and 300 K, and then the revival of magnetic ordering at the RhII {yields} postperovskite (PPv) transition after laser heating at 73 GPa. At the latter transition, at least half of Fe{sup 3+} ions transform from LS to HS and Fe{sub 2}O{sub 3} changes from a semiconductor to a metal. This result demonstrates that some magnetic carrier minerals may experience a complex sequence of magnetic ordering changes during impact rather than a monotonic demagnetization. Also local Fe enrichment at Earth's core-mantle boundary will lead to changes in the electronic structure and spin state of Fe in silicate PPv. If the ultra-low-velocity zones are composed of Fe-enriched silicate PPv and/or the basaltic materials are accumulated at the lowermost mantle, high electrical conductivity of these regions will play an important role for the electromagnetic coupling between the mantle and the core.

43 PARTICLE ACCELERATORS↗