Engineering Papers⌕ Search

Engineering topics

Pradhan, Nihar R.

Publications and source records attributed to Pradhan, Nihar R..

6 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Probing the Electronic and Opto-Electronic Properties of Multilayer MoS 2 Field-Effect Transistors at Low Temperatures

Transition metal dichalcogenides (TMDs)-based field-effect transistors (FETs) are being investigated vigorously for their promising applications in optoelectronics. Despite the high optical response reported in the literature, most of them are studied at room temperature. To extend the application of these materials in a photodetector, particularly at a low temperature, detailed understanding of the photo response behavior of these materials at low temperatures is crucial. Here we present a systematic investigation of temperature-dependent electronic and optoelectronic properties of few-layers MoS 2 FETs, synthesized using the mechanical exfoliation of bulk MoS 2 crystal, on the Si/SiO 2 substrate. Our MoS 2 FET show a room-temperature field-effect mobility μ FE ~40 cm 2 ·V -1 ·s -1 , which increases with decreasing temperature, stabilizing at 80 cm 2 ·V -1 ·s -1 below 100 K. The temperature-dependent (50 K < T < 300 K) photoconductivity measurements were investigated using a continuous laser source λ = 658 nm (E = 1.88 eV) over a broad range of effective illuminating laser intensity, P eff (0.02 μW < P eff < 0.6 μW). Photoconductivity measurements indicate a fractional power dependence of the steady-state photocurrent. The room-temperature photoresponsivity (R) obtained in these samples was found to be ~2 AW -1 , and it increases as a function of decreasing temperature, reaching a maximum at T = 75 K. The optoelectronic properties of MoS 2 at a low temperature give an insight into photocurrent generation mechanisms, which will help in altering/improving the performance of TMD-based devices for various applications.

2D materials↗
DOE OSTI2023

Insulator-to-metal phase transition in a few-layered MoSe 2 field effect transistor

The metal-to-insulator phase transition (MIT) in low-dimensional materials and particularly two-dimensional layered semiconductors is exciting to explore due to the fact that it challenges the prediction that a two-dimensional system must be insulating at low temperatures. Thus, the exploration of MITs in 2D layered semiconductors expands the understanding of the underlying physics. Here we report the MIT of a few-layered MoSe 2 field effect transistor under a gate bias (electric field) applied perpendicular to the MoSe 2 layers. With low applied gate voltage, the conductivity as a function of temperature from 150 K to 4 K shows typical semiconducting to insulating character. Above a critical applied gate voltage, V c , the conductivity becomes metallic (i.e., the conductivity increases continuously as a function of decreasing temperature). Evidence of a metallic state was observed using an applied gate voltage or, equivalently, increasing the density of charge carriers within the 2D channel. We analyzed the nature of the phase transition using percolation theory, where conductivity scales with the density of charge carriers as σ ∝ (n - n c ) δ . The critical exponent for a percolative phase transition, δ(T), has values ranging from 1.34 (at T = 150 K) to 2 (T = 20 K), which is close to the theoretical value of 1.33 for percolation to occur. Thus we conclude that the MIT in few-layered MoSe 2 is driven by charge carrier percolation. Finally, the conductivity does not scale with temperature, which is a hallmark of a quantum critical phase transition.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2021

Photogating-driven enhanced responsivity in a few-layered ReSe 2 phototransistor

A wide variety of two-dimensional (2D) metal dichalcogenide compounds have recently attracted much research interest due to their very high photoresponsivities (R) making them excellent candidates for optoelectronic applications. High R in 2D photoconductors is associated with trap state dynamics leading to a photogating effect, which is often manifested by a fractional power dependence (γ) of the photocurrent (I ph ) at an effective illumination intensity (P eff ). Furthermore, we present photoconductivity studies as a function of gate voltages, over a wide temperature range (20 K to 300 K) of field-effect transistors fabricated using thin layers of mechanically exfoliated Rhenium Diselenide (ReSe 2 ). We obtain very high responsivities R ~ 16500 A/W and external quantum efficiency (EQE) ~ 3.2 × 106% (at 140 K, V g = 60 V and P eff = 0.2 nW). A strong correlation between R and γ was established by investigating the dependence of these two quantities at various gate voltages and over a wide range of temperatures. Such correlations indicate the importance of trap state mediated photogating and its role in promoting high photo-responsivities in these materials. We believe such correlations can offer valuable insights for the design and development of high-performance photoactive devices using 2D materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Recent developments on 2D magnetic materials: challenges and opportunities

The emergence of two-dimensional (2D) magnetic materials exhibiting strong magnetization at ultrathin limits above room temperature are promising for miniaturization of devices beyond Moore’s law for future energy efficient nano-electronic devices. Here, the current status, different mechanisms for the existence of magnetism, spin current injection and other magnetic properties of monolayer to few-layers of various 2D magnetic materials are reviewed. Some of the promising applications of these materials are spintronics devices such as spin valves, spin tunnel field-effect transistors, and spin filtering magnetic tunnel junctions. Due to the tunable electronic properties of these 2D materials, it's quite interesting to inject the spin current with suitable ferromagnetic contacts. For instance,black phosphorus is a layered material with a small Schottky barrier height capable of injecting spin current. This review includes many recently explored 2D magnetic materials ranging from exfoliated 2D crystals to CVD grown materials from single to several layers, demonstrating tunable layer dependent magnetic properties. We also explore some of the promising theoretical study based on 2D magnetic compounds such as 2D alkali-based chromium chalcogenides, which shows ferromagnetic as well as semiconducting behavior. The layer-dependent magnetic ordering has been observed in layered compounds like 1T-CrTe 2 , VSe 2 , CrI 3 , and Fe 3 GeTe 2 , which have great potential for the future applications in magnetic based electronic devices. Finally, we emphasize the challenges, opportunities and future directions of the 2D magnetic materials, where new discoveries might have outstanding impact in transformational scientific breakthroughs towards memory, spintronics, optoelectronics and other multifunctional device applications.

36 MATERIALS SCIENCE↗
DOE OSTI2020

High broadband photoconductivity of few-layered MoS 2 field-effect transistors measured using multi-terminal methods: effects of contact resistance

Among the layered two dimensional semiconductors, molybdenum disulfide (MoS 2 ) is considered to be an excellent candidate for applications in optoelectronics and integrated circuits due to its layer-dependent tunable bandgap in the visible region, high ON/OFF current ratio in field-effect transistors (FET) and strong light–matter interaction properties. In this study, using multi-terminal measurements, we report high broadband photocurrent response ( R ) and external quantum efficiency (EQE) of few-atomic layered MoS 2 phototransistors fabricated on a SiO 2 dielectric substrate and encapsulated with a thin transparent polymer film of Cytop. The photocurrent response was measured using a white light source as well as a monochromatic light of wavelength λ = 400 nm–900 nm. We measured responsivity using a 2-terminal configuration as high as R = 1 × 10 3 A W -1 under white light illumination with an optical power P opt = 0.02 nW. The R value increased to 3.5 × 10 3 A W -1 when measured using a 4-terminal configuration. Using monochromatic light on the same device, the measured values of R were 10 3 and 6 × 10 3 A W -1 under illumination of λ = 400 nm when measured using 2- and 4-terminal methods, respectively. The highest EQE values obtained using λ = 400 nm were 10 5 % and 10 6 % measured using 2- and 4-terminal configurations, respectively. The wavelength dependent responsivity decreased from 400 nm to the near-IR region at 900 nm. The observed photoresponse, photocurrent–dark current ratio (PDCR), detectivity as a function of applied gate voltage, optical power, contact resistances and wavelength were measured and are discussed in detail. The observed responsivity is also thoroughly studied as a function of contact resistance of the device.

36 MATERIALS SCIENCE↗