Booster engines derived from the Space Shuttle Main Engine
Current vehicle studies of post-Space Shuttle vehicles have identified the potential need for a high-pressure booster engine using liquid oxygen/hydrocarbon fuel (RP-1) as propellants. Recent studies of the possibility of using Space Shuttle Main Engine (SSME) components for a high pressure LOX/RP-1 engine have resulted in several engine configurations which are based largely on SSME components. The current SSME thrust chamber is regeneratively cooled with hydrogen using a relatively low percentage of the total hydrogen flow. For a LOX/RP-1 application the SSME thrust chamber can be run at high pressures and be cooled with a relatively low hydrogen flow. In addition, the SSME oxygen pump, valves, and main injector components may be utilized for the booster engine. By using a majority of the current SSME engine components for the LOX/RE-1 booster engine, engine development time and cost can be significantly reduced compared to the development of a new engine.