Engineering Papers⌕ Search

Engineering topics

Porcello, L. J.

Publications and source records attributed to Porcello, L. J..

9 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

The Apollo Lunar Sounder radar system

The objectives of the Apollo 17 Lunar Sounder Experiment (ALSE) were to detect subsurface geologic structures, to generate a continuous lunar profile, and to image the moon at radar wavelengths. A three-wavelength synthetic-aperture radar (SAR) operating at 60, 20, and 2 m wavelengths was designed to attain these objectives. The design choices reflected a balance of scientific requirements versus Apollo mission and hardware constraints. The radar data from the lunar mission were recorded on photographic film in a conventional SAR format, and were returned to earth for processing. A combination of optical and digital processing and exploitation techniques was applied to the scientific interpretation of the data. Some preliminary results from the lunar mission have been obtained.

Porcello, L. J.↗
NASA NTRS1974

Elevation profiles of the moon

Five MHz radar data obtained from the Apollo 17 mission are used to determine elevation profiles of the moon. A change in range of one quarter of a wavelength (15 m for the 5 MHz radar) changes the round-trip radar range one half wavelength or 180 deg, thus allowing determination of the relative surface profile or slope with a high degree of precision. The technique of deriving the range or altimetry measurement from the range-Doppler data record on film yields a better understanding of the range accuracy. The presence of fade intervals can be observed directly and their effect on the profile measurement reduced to a minimum. The maria used to generate the center of maria are Western Procellarum, Serenitatis, and Crisium. The location of the center of mare relative to the center of figure and center of mass is identified.

Brown, W. E., Jr.↗
NASA NTRS1973

Task 4: Lake Ice Surveillance, 1406

The author has identified the following significant results. Although it is readily recognized that there is a need for ground truth to provide adequate guidance for remote sensing data interpretation, it is noted that, in terms of radar remote sensing, this ground truth is often inadequate. It is necessary to make basic electrical and physical measurements of the surface and to some depth below it. A brief outline is presented of a ground truth scheme which uses measurements of the dielectric constant. Two portable instruments were designed specifically for this purpose; these were: (1) a Q-meter for measurement of dielectric constant and loss tangent; and (2) an instrument to measure electrical properties of the two operating frequencies of the imaging radar. Although extensive data are lacking, several general cases of radar-earth surface and interaction are described; also, examples of radar imagery and some data on ice and snow are presented. It is concluded that the next logical step is to begin to quantify the radar ground truth in preparation for machine interpretation and automatic data processing of the radar imagery.

Porcello, L. J.↗
NASA NTRS1973

Apollo lunar sounder experiment

The four basic data products from the ALSE are sounding, profiling, imaging, and noise measurements. Attention was concentrated on the first three products, and both theory and preliminary results are presented. Background information is presented on the experiment and on the data products. Preliminary examples of the types of analyses that can be performed and the conclusions to which they can lead are included. Preliminary analysis of the data for subsurface features was successful in indicating with a high probability the capability of the ALSE to achieve its fundamental goal of substrate sounding. The imagery and profiling data are useful immediately for geologic interpretation, as demonstrated.

Phillips, R. J.↗
NASA NTRS1973

The Apollo 17 Lunar Sounder

The Apollo Lunar Sounder Experiment, a coherent radar operated from lunar orbit during the Apollo 17 mission, has scientific objectives of mapping lunar subsurface structure, surface profiling, surface imaging, and galactic noise measurement. Representative results from each of the four disciplines are presented. Subsurface reflections have been interpreted in both optically and digitally processed data. Images and profiles yield detailed selenomorphological information. The preliminary galactic noise results are consistent with earlier measurements by other workers.

Phillips, R. J.↗
NASA NTRS1972

ERTS computer compatible tape data processing and analysis. Appendix 1: The utility of imaging radars for the study of lake ice

There are no author-identified significant results in this report. Remotely sensed multispectral scanner and return beam vidicon imagery from ERTS-1 is being used for: (1) water depth measurements in the Virgin Islands and Upper Lake Michigan areas; (2) mapping of the Yellowstone National Park; (3) assessment of atmospheric effects in Colorado; (4) lake ice surveillance in Canada and Great Lakes areas; (5) recreational land use in Southeast Michigan; (6) International Field Year on the Great Lakes investigations of Lake Ontario; (7) image enhancement of multispectral scanner data using existing techniques; (8) water quality monitoring of the New York Bight, Tampa Bay, Lake Michigan, Santa Barbara Channel, and Lake Erie; (9) oil pollution detection in the Chesapeake Bay, Gulf of Mexico southwest of New Orleans, and Santa Barbara Channel; and (10) mapping iron compounds in the Wind River Mountains.

Polcyn, F. C.↗
NASA NTRS1972

Multispectral imaging radar

A side-looking radar, installed in a C-46 aircraft, was modified to provide it with an initial multispectral imaging capability. The radar is capable of radiating at either of two wavelengths, these being approximately 3 cm and 30 cm, with either horizontal or vertical polarization on each wavelength. Both the horizontally- and vertically-polarized components of the reflected signal can be observed for each wavelength/polarization transmitter configuration. At present, two-wavelength observation of a terrain region can be accomplished within the same day, but not with truly simultaneous observation on both wavelengths. A multiplex circuit to permit this simultaneous observation has been designed. A brief description of the modified radar system and its operating parameters is presented. Emphasis is then placed on initial flight test data and preliminary interpretation. Some considerations pertinent to the calibration of such radars are presented in passing.

Porcello, L. J.↗