Engineering Papers⌕ Search

Engineering topics

Poole, J. W.

Publications and source records attributed to Poole, J. W..

7 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1974

Seeded gas thrusters and related system components

A program involved with the construction and test of a number of laser heated thrusters is described. These thrusters, with a cavity approximately 23 cm long and 3.5 cm in i.d., are to be tested by NASA at a later date with a laser beam focused through the throat to heat hydrogen propellant containing an opacifier. The heated propellant exhausts through a supersonic nozzle with a 0.6 cm throat at 3000 C. Thrust stands and control systems were furnished with the thrusters. The report describes radio frequency plasma heated hot and cold flow simulation tests by the contractor.

Poole, J. W.↗
NASA NTRS1973

Simulator test to study hot-flow problems related to a gas cooled reactor

An advance study of materials, fuel injection, and hot flow problems related to the gas core nuclear rocket is reported. The first task was to test a previously constructed induction heated plasma GCNR simulator above 300 kW. A number of tests are reported operating in the range of 300 kW at 10,000 cps. A second simulator was designed but not constructed for cold-hot visualization studies using louvered walls. A third task was a paper investigation of practical uranium feed systems, including a detailed discussion of related problems. The last assignment resulted in two designs for plasma nozzle test devices that could be operated at 200 atm on hydrogen.

Poole, J. W.↗
NASA NTRS1973

Induction simulation of gas core nuclear engine

The design, construction and operation of an induction heated plasma device known as a combined principles simulator is discussed. This device incorporates the major design features of the gas core nuclear rocket engine such as solid feed, propellant seeding, propellant injection through the walls, and a transpiration cooled, choked flow nozzle. Both argon and nitrogen were used as propellant simulating material, and sodium was used for fuel simulating material. In addition, a number of experiments were conducted utilizing depleted uranium as the fuel. The test program revealed that satisfactory operation of this device can be accomplished over a range of operating conditions and provided additional data to confirm the validity of the gas core concept.

Poole, J. W.↗
NASA NTRS1972

Advances in induction-heated plasma torch technology

Continuing research has resulted in significant advances in induction-heated plasma torch technology which extend and enhance its potential for broad range of uses in chemical processing, materials development and testing, and development of large illumination sources. Summaries of these advances are briefly described.

Poole, J. W.↗
NASA NTRS1972

Induction torches and low frequency tests

Three induction-coupled plasma torches were operated at 9600 Hz to determine specific operating parameters and supply data for gas core nuclear rocket simulation studies. Two air-cooled torches, one 16 cm in diameter and one 30 cm in diameter, and a water-cooled torch 14 cm in diameter, were tested. Complete energy balances for the operating systems were obtained during operation. A series of operating points, including pressures from 30 torr to 1 atmosphere, power levels up to 343 kw, and gas flows from 1.1 to 35 g/sec, were documented. Complete operating data for approximately thirty runs are presented, along with graphs of significant operating parameters.

Poole, J. W.↗