Engineering Papers⌕ Search

Engineering topics

Polo-Garzon, Felipe

Publications and source records attributed to Polo-Garzon, Felipe.

10 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Active Palladium Structures on Ceria Obtained by Tuning Pd–Pd Distance for Efficient Methane Combustion

Efficiently removing/converting methane via methane combustion imposes challenges on catalyst design: how to design local structures of a catalytic site so that it has both high intrinsic activity and atomic efficiency? By manipulating the atomic distance of isolated Pd atoms, herein we show that the intrinsic activity of Pd catalysts can be significantly improved for methane combustion via a stable Pd 2 structure on a ceria nanorod support. Guided by theory and confirmed by experiment, we find that the turnover frequency (TOF) of the Pd 2 structure with the Pd–Pd distance of 2.99 Å is higher than that of the Pd 2 structure with the Pd–Pd distance of 2.75 Å; at least 26 times that of ceria supported Pd single atoms and 4 times that of ceria supported PdO nanoparticles. The high intrinsic activity of the 2.99 Å Pd–Pd structure is attributed to the conductive local redox environment from the two O atoms bridging the two Pd 2+ ions, which facilitates both methane adsorption and activation as well as the production of water and carbon dioxide during the methane oxidation process. In conclusion, this work highlights the sensitivity of catalytic behavior on the local structure of active sites and the fine-tuning of the metal–metal distance enabled by a support local environment for guiding the design of efficient catalysts for reactions that highly rely on Pt-group metals.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Tuning metal-support interactions in nickel–zeolite catalysts leads to enhanced stability during dry reforming of methane

Ni-based catalysts are highly reactive for dry reforming of methane (DRM) but they are prone to rapid deactivation due to sintering and/or coking. In this study, we present a straightforward approach for anchoring dispersed Ni sites with strengthened metal-support interactions, which leads to Ni active sites embedded in dealuminated Beta zeolite with superior stability and rates for DRM. The process involves solid-state grinding of dealuminated Beta zeolites and nickel nitrate, followed by calcination under finely controlled gas flow conditions. By combining in situ X-ray absorption spectroscopy and ab initio simulations, it is elucidated that the efficient removal of byproducts during catalyst synthesis is conducted to strengthen Ni–Si interactions that suppress coking and sintering after 100 h of time-on-stream. Transient isotopic kinetic experiments shed light on the differences in intrinsic turnover frequency of Ni species and explain performance trends. This work constructs a fundamental understanding regarding the implication of facile synthesis protocols on metal-support interaction in zeolite-supported Ni sites, and it lays the needed foundations on how these interactions can be tuned for outstanding DRM performance.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Precision Structure Engineering of High-Entropy Oxides under Ambient Conditions

High-entropy oxides (HEOs) have unveiled a unique frontier in the realm of heterogeneous catalysis, taking advantage of the entropic effect and increased complexities to deliver ultrahigh stability and large tuning capability. However, current HEO synthesis mainly relies on high-temperature annealing approaches affording HEOs possessing no or low surface area, inferior active site exposure efficiency, and low controllability over the structure tuning. The grand challenge lies in producing high-quality HEO catalysts with high active site utilization efficiency, which relies on precision structure engineering, preferably under mild conditions. In this work, an in situ lattice engineering approach was developed to afford a supported HEO catalyst under ambient conditions. The HEO compositions (CuCoFeNiMnO x ) were uniformly integrated into the lattice of CeO 2 driven by cavitation-induced nucleation being generated via ultrasonication. The as-afforded catalysts were featured by high surface area, atomically dispersed HEO compositions, active redox properties, abundant oxygen vacancies (O V ), antiagglomeration, and high phase stability under harsh conditions. Compared with the ex situ introduction of HEO on the surface, the in situ method provides dual benefits to maintain the dispersity of HEO via entropic and lattice confinement effects. Engineering the complex HEO within the lattice of fluorite-structured CeO 2 also yields abundant defects (e.g., O V ) and active metal sites with strong reducing properties (e.g., Ce 3+ and Cu + ), which greatly improves the activity of the lattice oxygen and tunability of the adsorption behavior of the guest molecules, especially in the presence of impurities (e.g., water and propane). The catalytic performance of the supported HEO catalyst in oxidative procedures surpasses the pure dense phase HEO as well as the ex situ-generated catalysts. Further, the synthesis approach being developed in this work, together with the fundamental understanding in structure evolution and reaction mechanism, showcases a facile pathway under ambient conditions to generate stable catalysts capable of maintaining structural robustness in high-temperature conditions while delivering enhanced catalytic performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Low-temperature dechlorination of polyvinyl chloride (PVC) for production of H 2 and carbon materials using liquid metal catalysts

Polyvinyl chloride (PVC) is ubiquitous in everyday life; however, it is not recycled because it degrades uncontrollably into toxic products above 250°C. Therefore, it is of interest to controllably dechlorinate PVC at mild temperatures to generate narrowly distributed carbon materials. We present a catalytic route to dechlorinate PVC (~90% reduction of Cl content) at mild temperature (200°C) to produce gas H 2 (with negligible coproduction of corrosive gas HCl) and carbon materials using Ga as a liquid metal (LM) catalyst. A LM was used to promote intimate contact between PVC and the catalytic sites. During dechlorination of PVC, Cl is sequestrated in the carbonaceous solid product. Later, chlorine is easily removed with an acetone wash at room temperature. The Ga LM catalyst is reusable, outperforms a traditional supported metal catalyst, and successfully converts (untreated) discarded PVC pipe.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Stabilization and manipulation of highly concentrated copper single atoms by high entropy oxides

Facile and controllable methodologies capable of providing single atom catalysts (SACs) with high-density active metal sites and sintering-resistance under harsh conditions are highly desired and grand challenges in heterogeneous catalysis. Herein, the entropy effect was leveraged to stabilize and manipulate the electronic properties of copper SACs. The as-developed ultrasonication-driven approach could integrate highly concentrated Cu SAs within the lattice of fluorite-structured high entropy oxide (HEFO) under ambient conditions (CuO-HEFO). The dual benefits from the high entropy effect of the support and the in-situ lattice engineering led to the generation of abundant Cu 1+ species and oxygen defects, together with ultra-high stability and sintering-resistance under extremely harsh conditions. This was confirmed by deploying non-high entropy support (CuO-CeO 2 ) or Cu sites located on the surface of HEFO (CuO@HEFO). In conclusion, the catalytic activity of CuO-HEFO surpassed that of CuO-CeO 2 and CuO@HEFO in CO oxidation together with well-maintained long-term stability and resistance to gas impurities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Recent Developments in Revealing the Impact of Complex Metal Oxide Reconstruction on Catalysis

Surface reconstruction of complex metal oxides refers to the alterations of the topmost catalyst surface, relative to the bulk structure, following exposure to pretreatment or reaction conditions during heterogeneous catalysis. (1) This structural and electronic transformation may involve (1) changes of the exposed crystallographic facets, (2) changes in chemical composition, such as the enrichment of specific elements, and, (3) morphological variations, including surface roughness and defects (Scheme 1). Beyond relaxation, surface reconstruction here also encompasses disruptions to the periodicity of the sublayers and changes to its stoichiometry. This change significantly influences the chemical properties of the catalyst surface, such as redox sites, (2) acid/base pairs, hydroxyl groups, (3) and surface defects. Surface reconstruction occurs due to the thermodynamic drive to lower the surface energy of the catalyst under the surrounding environment (e.g., temperature, chemical potential of species present). In addition to the treatment or reaction conditions, the extent of reconstruction also depends on the elements in the metal oxide structure. For instance, annealing ABO 3 perovskites (SrTiO 3 , BaTiO 3 , and BaZrO 3 ) at high temperatures (500 °C) in O 2 has a very different impact on the A/B ratio at the surface (ranging from 0.9 to 2.5), depending on the identity of A and B. (4) Metal oxide surface reconstruction under an electric field and exposure to acidic and alkaline media has recently gained increased attention in electrocatalysis, such as in the oxygen evolution reaction (OER); (5,6) however, in this Viewpoint we focus on the impact of surface reconstruction on thermal catalysis, a critical enduring research theme with ongoing challenges. Here, we start showcasing approaches to characterize surface reconstruction at the topmost surface layer, such as low-energy ion scattering (LEIS), discussing advantages and limitations. Next, we connect characterization of surface reconstruction to site-specific kinetic analysis, enabled via steady-state isotopic transient kinetic analysis (SSITKA), and we express our viewpoint on building structure–performance relationships by deeply understanding reconstructed surfaces. Later, we comment on the potential of tuning surface reconstruction to enhance catalytic performance. Finally, we explore the interplay between surface reconstruction and the “intelligent behavior”.

alcohol conversion↗
DOE OSTI2023

Acetylene Semi-Hydrogenation on a Perovskite Oxyhydride Surface: Insights from First Principles and Microkinetic Modeling

Although perovskite oxyhydrides (POHs) have shown promise as a support for selective hydrogenation, it is unknown if they themselves can catalyze alkyne semi-hydrogenation. Here, we use first-principles density functional theory, coupled with microkinetic modeling, to investigate acetylene semi-hydrogenation on a prototypical POH, cubic BaTiO 2.5 H 0.5 (BTOH). Two different mechanisms are examined on a representative surface of BTOH under the reaction conditions: both are based on the Horiuti–Polanyi mechanism, but the way of H 2 dissociation is different. In mechanism 1, a lattice hydride H atom and then a surface adsorbed H atom sequentially hydrogenate the adsorbed acetylene. In mechanism 2, two lattice hydride H atoms from the BTOH sequentially hydrogenate the adsorbed acetylene. In both mechanisms, the H atoms are replenished from gas phase H 2 dissociation. Using density functional theory (DFT), we have calculated pathways for these two mechanisms in hydrogenation of acetylene to ethylene, as well as further to ethane. Microkinetic modeling based on the DFT energetics indicates that at 523 K, hydrogenation to ethylene and ethane via mechanism 1 occurs at a rate up to two orders of magnitude faster than via mechanism 2. A selectivity analysis for the temperature range of 373–673 K shows that the product observed is essentially only ethylene within the more active mechanism 1. This is because at the steady state, there is a significant amount of surface anion vacancies that facilitate heterolytic H 2 dissociation and help stabilize a vinyl intermediate. In conclusion, the present findings suggest that POHs are capable of selective hydrogenation, thanks to their rich hydrogen surface-redox chemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Mechanochemistry-Induced Strong Metal–Support Interactions Construction toward Enhanced Hydrogenation

The construction of strong metal–support interactions (SMSIs) represented an attractive approach to producing supported noble metal nanocatalysts possessing enhanced stability by overlayer encapsulation. The development of facile approaches capable of achieving efficient, controllable, and extensive SMSI overlayer formation, particularly under neat and ambient conditions, is a long-standing challenge. In this work, a mechanochemistry-driven pathway was deployed for efficient and controllable SMSI construction under neat and ambient conditions to customize the capsulation degree and overlayer structures toward enhanced catalysis. The reducibility of the additives and the high interaction efficiency provided by the mechanochemical treatment could afford abundant active intermediates (e.g., Ti 3+ species and oxygen defects) within a short time to induce and tune the overlayer encapsulation. This facile approach could be extensively deployed to TiO2-derived nanocatalysts with diverse phases, diverse reducible metal oxides-involved systems, and different supported noble metal nanoparticles. Enhanced hydrogenation activity was achieved by the as-afforded nanocatalysts upon SMSI construction and further tuned by the encapsulation degree.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Adsorbate-Induced Strong Metal–Support Interactions: Implications for Catalyst Design

Since the discovery of strong metal–support interactions (SMSIs) over supported metal catalysts in the 1970s, researchers have studied ways to harness this type of catalyst reconstruction to achieve enhanced stability of metal particles against sintering and to create catalytic sites with novel electronic and bonding properties. The motivation to elucidate performance–structure relationships in catalytic transformations has led researchers to take a closer look into catalytic surfaces under reaction conditions rather than a postreaction analysis. These investigations of operating catalysts have made it clear that SMSIs are more common than initially thought. Recent reports show how various adsorbed species, rather than traditional H 2 /O 2 treatment, can promote SMSI in various catalytic systems, a phenomenon named adsorbate-induced SMSI (A-SMSI). Researching the occurrence of A-SMSI has allowed fundamental understanding of catalyst stability, catalytic rates, and product selectivity. The present Perspective discusses the state-of-the-art regarding A-SMSI, the current challenges, and the opportunities ahead in heterogeneous catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗