Engineering Papers⌕ Search

Engineering topics

Plescia, J. B.

Publications and source records attributed to Plescia, J. B..

At least 37 records · Page 2

Geology of Biblis Patera, Ulysses Patera, and Jovis Tholus, Mars

There are a variety of constructional volcanic features in Tharsis. These features range from Olympus Mons and the Tharsis Montes shields, to the small low shields and fissure eruptions that characterize much of the volcanic plains, to the smaller volcanic constructs in the northeast and western parts of Tharsis. I describe the geology of the western group, which includes Biblis Patera, Ulysses Patera, and Jovis Tholus. Each of these volcanoes has had a unique, and complex geologic history. Biblis Patera is located at 2.3 deg. N, 123.8 deg. The volcano is elongate in a northwesterly direction and has a large, faulted caldera complex. The flanks of the volcano and adjacent plains are characterized by lava flows, northwest-trending graben and troughs, and caldera-concentric graben and troughs. Biblis Patera is approximately 66 x 127 km with an oval 51 x 56 km caldera; the summit elevation is approximately 2 km above the surrounding plains. The constrcut has an estimated volume of 8-22 x 10(exp 3) cu km. Ulysses Patera is located at 2.7 deg. N, 121.3 deg. W and stands approx. 2-3 km above the surrounding plain; flank slopes are approximately 7 deg. to 12 deg. The caldera floor is quite deep, lying 1.8 to 2.2 km below the caldera rim. The caldera has a void volume of approximately 5000 cu km, the total solid mass volume of the volcano is 7-16 x 10(exp 3) cu km. Jovis Tholus is centered at 18.3 deg N; 117.5 deg W; it is a low relief, volcano with gentle flank slopes of between 3 and 8 deg. The construct is dominated by a series of inset calderas which make up the largest fraction of the area. The caldera complex is offset to the southwest side. Total shield dimensions are approximately 77 km (e-wt) by 62 km (n-s); the caldera complex is approximately 44 x 34 km. The shield is embayed on all sides by younger Amazonian age volcanics. Total relief, relative to the surrounding plains, is probably approximately 2 km. The total volume of Jovis Tholus is estimated to be approximately 2-5 x 10(exp 3) cu km.

Plescia, J. B.↗

Gravity investigation of the Manson impact structure, Iowa

The Manson crater, of probable Cretaceous/Tertiary age, is located in northwestern Iowa (center at 42 deg. 34.44 min N; 94 deg. 33.60 min W). A seismic reflection profile along an east west line across the crater and drill hole data indicate a crater about 35 km in diameter having the classic form for an impact crater, an uplifted central peak composed of uplifted Proterozoic crystalline bedrock, surrounded by a 'moat' filled with impact produced breccia and a ring graben zone composed of tilted fault blocks of the Proterozoic and Paleozoic country rocks. The structure has been significantly eroded. This geologic structure would be expected to produce a significant gravity signature and study of that signature would shed additional light on the details of the crater structure. A gravity study was undertaken to better resolve the crustal structure. The regional Bouguer gravity field is characterized by a southeastward decreasing field. To first order, the Bouguer gravity field can be understood in the context of the geology of the Precambrian basement. The high gravity at the southeast corner is associated with the mid-continent gravity high; the adjacent low to the northwest results from a basin containing low-density clastic sediments shed from the basement high. Modeling of a simple basin and adjacent high predicts much of the observed Bouguer gravity signature. A gravity signature due to structure associated with the Manson impact is not apparent in the Bouguer data. To resolve the gravity signature of the impact, a series of polynomial surfaces were fit to the Bouguer gravity field to isolate the small wavelength residual anomalies. The residual gravity obtained after subtracting a 5th- or 6th-order polynomial seems to remove most of the regional effects and isolate local anomalies. The pattern resolved in the residual gravity is one of a gravity high surrounded by gravity lows and in turn surrounded by isolated gravity highs. The central portion of the crater is characterized by two positive anomalies having amplitudes of about plus 4 mGal separated by a gentle saddle located approximately at the crater center.

Plescia, J. B.↗

Unmanned lunar rovers: Utilization for exploration

A small lunar rover and its use for lunar exploration are described. Constraints on a rover mission in the fields of communications, power, speed, navigation/hazard avoidance, and operational time are discussed. The rover design concept consistent with the constraints is described. The instruments to be used, again constrained by mass and power requirements, are listed. Three mission objectives are examined: geological exploration; resource assessment; and a geotechnical survey. It was determined that a small rover, with a mass of less than 60 kg and which would be compatible with being carried on the first Artemis lunar lander, could be built and could accomplish significant scientific exploration or the collection of engineering information.

Plescia, J. B.↗

Recent Elysium volcanism: Effects on the Martian atmosphere

A vast area of smooth plains in southeastern Elysium near 5 deg N, 195 deg was identified as young volcanic plains. These plains represent flood eruptions of very low viscosity lavas at a point in time much later than the volcanism that produced the major volcanoes of Elysium. Since volcanism is a principal mechanism by which gases are supplied to the atmosphere, and since these gases can have important climatic effects, it is important to consider the amount of H2O, CO2, and other gases that were possibly released. We present estimates of input and release rates from this volcanic episode. The age is defined by the density of superposed craters; there are 89 +/- 15 craters greater than or equal to 1 km per 10(exp 6) sq km corresponding to the Upper Amazonian making this the youngest major volcanic episode. Lavas, covering 1.5 x 10(exp 6) sq km and presumably erupted through fissures, filled a topographic low and then flowed through knobby terrain into westernmost Amazonis. The western plains are characterized by scattered low shields having radial lava flows. Unit thickness is uncertain, individual flows are about 10 m thick; the entire deposit buries older knobby terrain having local relief of 200-400 m (estimated by Earth-based radar data); hence the volcanics must be thick enough to bury that relief. On the basis of unit morphology, length of flows, and the extent of the deposit, it can be inferred that the lava was of low viscosity and mafic to ultramafic composition. The age and petrology of the shergottites suggest they may have come from this unit.

Plescia, J. B.↗

Lunar Surface Rovers

Many questions of lunar science remain unanswered because of a lack of specific data. With the potential for returning humans to the Moon and establishing a long-term presence there, a new realm of exploration is possible. Numerous plans have been outlined for orbital and surface missions. The capabilities and objectives of a small class of rovers to be deployed on the lunar surface are described. The objective of these small rovers is to collect detailed in situ information about the composition and distribution of materials on the lunar surface. Those data, in turn, would be applied to a variety of lunar geoscience questions and form a basis for planning human activities on the lunar surface.

Plescia, J. B.↗

Graben and extension in northern Tharsis, Mars

A morphometric analysis of north-south trending graben at 35 deg N in northern Tharsis is used to provide the first quantitative measurements of crustal extension in and strain for areas of the Martian crust that have undergone both extreme and mild deformation. These estimates also demonstrate the viability of the Viking data for making such quantitative assessment. Graben in the region accommodate about 8 km of post Early Amazonian east-west extension. This extension corresponds to a net regional strain of 0.45-0.61 percent; local strains vary from less than 1 percent to 5 percent. Extension is nonuniform and localized near 110 deg (south of Alba Patera and north of Ceraunius Fossae) because of reactivation of preexisting fractures in underlying basement and possibly due to superposition of stress fields from Tharsis and Alba Patera. A major mechanical discontinuity in the shallow crust, probably representing the base of or a strength contrast within the megaregolith, is observed. It occurs at a depth of 2 km on the profile flanks and is depressed to about 7.5 km near 110 deg due to loading of the crust by the volcano.

Plescia, J. B.↗

A review of the regional geophysics of the Arizona Transition Zone

A review of existing geophysical information and new data presented in this special section indicate that major changes in crustal properties between the Basin and Range and Colorado Plateau occur in, or directly adjacent to, the region defined as the Arizona Transition Zone. Although this region was designated on a physiographic basis, studies indicate that it is also the geophysical transition between adjoining provinces. The Transition Zone displays anomalous crustal and upper mantle seismic properties, shallow Curie isotherms, high heat flow, and steep down-to-the-plateau Bouguer gravity gradients. Seismic and gravity studies suggest that the change in crustal thickness, from thin crust in the Basin and Range to thick crust in the Colorado Plateau, may occur as a series of steps rather than a planar surface. Anomalous P wave velocities, high heat flow, shallow Curie isotherms, and results of gravity modeling suggest that the upper mantle is heterogeneous in this region. A relatively shallow asthenosphere beneath the Basin and Range and Transition Zone contrasted with a thick lithosphere beneath the Colorado Plateau would be one explanation that would satisfy these geophysical observations.

Hendricks, J. D.↗

Compressive strain in Lunae Planum-shortening across wrinkle ridges

Wrinkle ridges have long been considered to be structural or structurally controlled features. Most, but not all, recent studies have converged on a model in which wrinkle ridges are structural features formed under compressive stress; the deformation being accommodated by faulting and folding. Given that wrinkle ridges are compressive tectonic features, an analysis of the associated shortening and strain provides important quantitative information about local and regional deformation. Lunae Planum is dominated by north-south trending ridges extending from Kasei Valles in the north to Valles Marineris in the south. To quantify the morphometric character, a photoclinometric study was undertaken for ridges on Lunae Planum using the Davis and Soderblom. More than 25 ridges were examined between long. 57 and 80 deg, lat. 5 to 25 deg N. For each ridge, several profiles were obtained along its length. Ridge width, total relief, and elevation offset were measured for each ridge. Analyses are given.

Plescia, J. B.↗

Interactions of tectonic, igneous, and hydraulic processes in the North Tharsis Region of Mars

Recent work on the north Tharsis of Mars has revealed a complex geologic history involving volcanism, tectonism, flooding, and mass wasting. Our detailed photogeologic analysis of this region found many previously unreported volcanic vents, volcaniclastic flows, irregular cracks, and minor pit chains; additional evidence that volcanic tectonic processes dominated this region throughout Martian geologic time; and the local involvement of these processes with surface and near surface water. Also, photoclinometric profiles were obtained within the region of troughs, simple grabens, and pit chains, as well as average spacings of pits along pit chains. These data were used together with techniques to estimate depths of crustal mechanical discontinuities that may have controlled the development of these features. In turn, such discontinuities may be controlled by stratigraphy, presence of water or ice, or chemical cementation.

Davis, P. A.↗

Extension and strain in Northern Tharsis

The northern areas of Tharsis, south of Alba Patera, are remarkable in that they are dominated by extensive, generally north trending graben. Some graben are small isolated features whereas others are complex overlapping features in which individual fault pairs are impossible to separate. This pattern indicates an east-west extensional stress regime, consistent with stress models for Tharsis. To estimate the regional east-west extension and strain, graben along a profile at 35 N latitude, between longitudes 135 and 93 degs were studied. This profile was chosen because the graben have a northerly trend, the structures are relatively simple, the profile is anchored to ancient Noachian age crust, and high resolution images are available. The western end of the profile begins at Acheron Fossae and ends in the east at the southwestern part of Tempe Fossae. Plains units cut by the graben include Hesperian and Amazonian age members of the Alba Patera and Ceraunius Fossae Formations.

Plescia, J. B.↗

Gravity survey of the Mt. Toondina impact structure, South Australia

The Mt. Toondina impact structure is located in northern South Australia, about 45 km south of the town of Oodnadatta. Only the central uplift is exposed. The outcrops at Mt. Toondina reveal a remarkable structural anomaly surrounded by a broad expanse of nearly flat-lying beds of the Bulldog Shale of Early Cretaceous age. A gravity survey was undertaken in 1989 to determine the diameter of the impact structure, define the form of the central uplift, and understand the local crustal structure. Data were collected along two orthogonal lines across the structure. In addition to the profiles, a significant number of measurements were made on and around the central uplift. The 1989 gravity data combined with 1963 gravity data and the seismic reflection data provide an excellent data base to interpret the subsurface structure of the Mt. Toondina feature.

Plescia, J. B.↗

Wrinkle ridges in Lunae Planum Mars - Implications for shortening and strain

Photoclinometric data for Lunae Planum wrinkle ridges indicate average relief of about 130 m and distinct elevation discontinuities across the ridge of 55 m. Modeling ridges as the result of thrust faulting and associated upper-plate folding indicates shortening across individual ridges of about 131 m (90 percent faulting). Total shortening at 20 N across Lunae Planum is about 1840 m corresponding to a regional compressive strain of 0.29 percent. Strain appears uniform across Lunae Planum, although it is accommodated by larger and fewer structures in the west than in the east.

Plescia, J. B.↗

Faulting and folding in the formation of planetary wrinkle ridges

Topographic profiles for planetary wrinkle ridges compiled from high-resolution Lunar Topographic Orthophoto maps for the moon and from monoscopic photoclinometry data for Mars reveal that many of these ridges are characterized by an elevation offset between one side of a ridge and the other. To investigate the relative importance of faulting and folding in the formation of planetary wrinkle ridges, this paper develops a model of subsurface structure, based on observations and measurements of surface physiography and topography by Golombek and Franklin (1987) and Plescia (1990), and assumptions of subsurface structure, which makes it possible to estimate shortening across wrinkle ridges on Moon and Mars. According to this model, total ridge shortening is on the order of 100 m; shortening due to faulting exceeds shortening due to folding for fault dips up to 60-80 deg, implying that faults beneath many wrinkle ridges break the surface to accomodate the greater displacement along the fault than is accomodated in the fold.

Golombek, M. P.↗

Recent flood lavas in the Elysium region of Mars

A volcanic origin is presently suggested for the 'Cerberus Formation' region of smooth plains in the southeastern Elysium region of Mars, on the basis of its surface morphology, lobate edges, vents, and an embayment relation of the unit with adjacent, older units. The low viscosity lavas that filled a topographic depression in southeastern Elysium subsequently flowed into western Amazonic Planitia via channels formed by an earlier fluvial episode. A young, upper Amazonian dating is indicated by crater frequencies and stratigraphic relations, implying that large-scale eruptions of low-viscosity lava were still possible late in Martian history.

Plescia, J. B.↗

Geologic exploration of Mars

The scientific objectives and methods involved in a geologic exploration of Mars from a manned outpost are discussed. The constraints on outpost activities imposed by the limited crew size, limited amount of time available for science, the limited diversity of scientific expertise, and the competition between scientific disciplines are addressed. Three examples of possible outpost locations are examined: the Olympus Mons aureole, Mangala Valles/Daedalia Planum, and Candor Chasma. The geologic work that could be done at each site is pointed out.

Plescia, J. B.↗

Does wrinkle ridge formation on Mars involve most of the lithosphere

Recent work on the origin of wrinkle ridges suggests that they are compressional tectonic features whose subsurface structure is not understood. Some characteristics of Martian wrinkle ridges are reviewed which suggest that they are the surface expression of thrust faults that extend through much of the lithosphere.

Golombek, M. P.↗

Photoclinometric analysis of wrinkle ridges on Lunae Planum, Mars

Wrinkle ridges are common morphologic features on Mars. Both volcanic and tectonic mechanisms were suggested to explain their origin; recent work has focused on a compressional origin. Analysis of terrestrial analogs has greatly influenced and aided the understanding of wrinkle ridge formation. An important aspect necessary to intrepret structure is topography. Topographic profiles across ridges can provide important constraints for models of internal structure and analyzing deformation associated with ridges. Topographic maps of Mars are too coarse to resolve the topography of individual ridges; therefore, monoscopic photoclinometry was used to derive topographic profiles for the ridges. Profiles spaced a few kilometers apart were obtained for each ridge, the number depended on ridge length, morphology, and albedo variation. Photoclinometry relies on pixel brightness variations which results from topography, albedo, or both. Because of the albedo variations, photoclimometric profiles can not be extended across large distances, such as between adjacent ridges (about 20 to 80 km). However, the technique is applicable to shorter distances, such as the distance across typical ridges. Profiles were measured across the ridge and extended a few kilometers on either side, including all visible components of the ridge. The results of these measurements and the use of internal structure and topographic profile models for estimating the shortening due to folding and faulting are discussed.

Plescia, J. B.↗

Young flood lavas in the Elysium Region, Mars

The nature and origin of a smooth plains unit (the Cerberus Plains) in southeastern Elysium and western Amazonis are reported. The interpretation that the Cerberus Plains resulted from flood plains style volcanism late in martian history is presented which carries implications for martian thermal history and volcanic evolution of a global scale. Although central construct volcanism (e.g., Olympus Mons) has long been recognized as occurring late in time, flood volcanism has not. Flood volcanism has been suggested as the origin of the ridged plains units (e.g., Lunae Planum, Solis, and Sinai Planum). This type of volcanic activity generally occurred early, and in Tharsis, the style of volcanism evolved from flood eruptions into centralized eruptions which built the large Tharsis Montes and Olympus Mons shields. Volcanism in the Elysium region seems to have followed a similar trend from flood eruptions to central construct building. But, the Cerberus Plains indicate that the volcanic style returned to flood eruption again after central constructional volcanism had ended.

Plescia, J. B.↗