Engineering Papers⌕ Search

Engineering topics

Pivirotto, T. J.

Publications and source records attributed to Pivirotto, T. J..

26 records · Page 2

Supersonic electrical-discharge copper vapor laser.

A copper vapor laser, utilizing a pulsed discharge transverse to a supersonic flow of copper vapor, argon, and helium and oscillating at 5106 and 5782 A, has been built and tested. Laser energy densities per pulse of 2.5 microjoules per cu cm have been achieved to date. Laser pulse widths of up to 185 nsec have been obtained with delay times after initiation of the current pulse of 220 to 250 nsec. Both the delay time and pulse width are in good agreement with theoretical predictions. Quenching of the laser pulse is shown to be due to a rapid increase in the rate of equilibration of the lasing levels by electron collisions, and to a decrease in the differential pumping of the lasing levels from the ground state because of a decay in the electron temperature.

Russell, G. R.↗

Pressure and current effects on the thermal efficiency of an MPD arc used as a plasma source

Measurements of arc voltage and energy loss to the cooled electrodes of a magnetoplasmadynamic (MPD) arc, operating without an applied magnetic field, were made at chamber pressures of 26 to 950 torr, argon mass flow rates of 0.08 to 44 g/s and current of 200 to 2000 A. The resulting arc thermal efficiency varied from 22% at a chamber pressure of 26 torr to 88% at 950 torr. Thermal efficiency was only weakly dependent on arc current. It is concluded that the MPD arc operating without an applied magnetic field and at higher pressure than normally used in thruster applications is a reliable and efficient steady-state plasma source.

Pivirotto, T. J.↗

Similarity in confined vortex flows

Vortex flow of dissimilar fluids under conditions of exact geometric similarity using diatomic gases nitrogen and hydrogen - fluid mechanics

GAS FLOW↗