Engineering Papers⌕ Search

Engineering topics

Pike, W. T.

Publications and source records attributed to Pike, W. T..

At least 37 records · Page 2
All sourcesNASA NTRSDOE OSTI
NASA NTRS1994

(abstract) Transmission Electron Microscopy of Al(sub x)Ga(sub 1-x)N/SiC Multilayer Structures Grown on Sapphire Substrates

The potential of wide-band-gap III-V nitrides as ultraviolet sensors and light emitters has prompted an increasing amount of work recently, including the fabrication of the first UV sensors from as-deposited single crystal GaN. We have used high resolution transmission electron microscopy (TEM) to study the microstructure of two novel developments of wide-band-gap III-V nitrides: the growth of ultra-short period GaN/AlN superlattices; and the incorporation of SiC layers into Al(sub x)Ga(sub 1-x)N structures. By varying the relative periods in a GaN/AlN superlattice, the band gap of the composite can be tailored to lie between the elemental values of 365 nm for GaN and 200 nm for AlN. The group IV semiconductor, SiC, has a wide band-gap and has a close lattice match (less than 3 %) to Al(sub x)Ga(sub 1-x)N for growth on the basal plane. Demonstration of epitaxial growth for Al(sub x)Ga(sub 1-x)N/SiC multilayers would introduce a wide band-gap analog to the already existing family of III-V and Si(sub 1-x)Ge(sub x) heteroepitaxial growth systems. Although good quality growth of GaN on SiC substrates has been demonstrated, Al(sub x)Ga(sub 1-x)N/SiC multilayer structures have never been grown and the interfacial structure is unknown.

GaN AlN GaN/AlN↗
NASA NTRS1994

Ballistic-Electron-Emission Microscopy of Strained Si l-x Ge x Layers

Ballistic-electron-emission microscopy has been used to investigate the effects of strain on Si l-x Ge x alloys. Lifting of the degeneracy of the conduction-band minimum of SiGe due to lattice deformation has been directly measured by application of BEEM spectroscopy to Ag/Si structures.

lattice↗
NASA NTRS1994

High Performance InGaAs/GaAs Quantum Well Infrared Photodetectors

By increasing the quantum well barrier width, incorporating spacer layers between the contacts and the multi quantum well region, and optimizing the materials growth parameters, we have dramatically reduced the dark current by many orders of magnitude and thereby significantly increased the detectivity.

spacer↗
NASA NTRS1993

(abstract) Mechanism of Selective Porosification at Heterojunctions in Group IV Multilayer Structures

Highly selective porosification of SiGe or Ge layers is observed in multilayer Si/SiGe or Si/Ge structures grown on (100)Si. These alternating porous/nonporous structures could potentially be used to fabricate light-emitting devices. The etch-selectivity appears to be dominated by band-structure effects and other factors such as lattice strain and electrochemical potential differences play a minor role. Additional structures and electrolytic etching are being examined to confirm these results.

porosification silicon Si Ge germanium light emitt↗
NASA NTRS1993

Electron Mobility Studies of Device Quality InAs/GaAs Short Period Supprlattices Grown by Dynamic Stoichiometry Control and Floating In Flash-off Methods

The Strained Layer InGaAs/GaAs system has been the subject of substantial work emphasizing both growth studies and device applications. Relatively few studies have successfully explored the binary InAs on GaAs system because of the difficulties of maintaining a specular growth front and the apparently small value of the critical thickness.

Electron Mobility↗
NASA NTRS1993

Visible photoluminescence of porous Si(1-x)Ge(x) obtained by stain etching

We have investigated visible photoluminescence (PL) from thin porous Si(1-x)Ge(x) alloy layers prepared by stain etching of molecular-beam-epitaxy-grown material. Seven samples with nominal Ge fraction x varying from 0.04 to 0.41 were studied at room temperature and 80 K. Samples of bulk stain etched Si and Ge were also investigated. The composition of the porous material was determined using X-ray photoemission spectroscopy and Rutherford backscattering techniques to be considerably more Ge-rich than the starting epitaxial layers. While the luminescence intensity drops significantly with the increasing Ge fraction, we observe no significant variation in the PL wavelength at room temperature. This is clearly in contradiction to the popular model based on quantum confinement in crystalline silicon which predicts that the PL energy should follow the bandgap variation of the starting material. However, our data are consistent with small active units containing only a few Si atoms that are responsible for the light emission. Such units are present in many compounds proposed in the literature as the cause of the visible PL in porous Si.

Ksendzov, A.↗
NASA NTRS1993

Interband optical transitions between confined and unconfined states in quantum wells

The interband optical absorption in single quantum wells (SQWs) due to transitions between confined states and unconfined continuum states (C-U transitions) were measured, calculated, and compared to absorption due to transitions involving pairs of confined states (C-C transiitons). An In(0.25)Ga(0.75)As/GaAs SQW with a 61-A well width was used in the experiment. A simple model describes how the slow-turnon absorption line shapes characterisic of SQWs evolve into sharp steplike features as more wells are added.

Ksendzov, A.↗
NASA NTRS1992

Cathodoluminescence and transmission electron microscopy study of dark line defects in thick In(0.2)Ga(0.8)As/GaAs multiple quantum wells

TEM and cathodoluminescence (CL) imaging and spectroscopy have been performed on In(0.2)Ga(0.8)As/GaAs MQW structures. Cross-sectional and plan-view TEM demonstrates that misfit dislocations (MDs) are confined to the MQW-to-GaAs interfacial regions. The observed large variation in the exciton luminescence intensity is interpreted as due to the presence of nonradiative recombination centers spread homogeneously in the MQW region away from interface MDs. These nonradiative recombination centers compete with exciton and midgap radiative centers at wavelengths of 950 nm and 1000-1600 nm, respectively, resulting in spatiallty correlated dark line defects for all CL imaging wavelengths.

Rich, D. H.↗
NASA NTRS1992

New class of Si-based superlattices - Alternating layers of crystalline Si and porous amorphous Si(1-x)Ge(x) alloys

Superlattices consisting of alternating layers of crystalline Si and porous amorphous Si(1-x)Ge(x) have been fabricated. This is accomplished by first growing a Si/Si(0.7)Ge(0.3) superlattice by molecular beam epitaxy, followed by Ar-ion milling to form mesa structures, and finally by immersion in HF:HNO3:H2O. This solution creates a porous structure similar to that created by anodic etching, and a high selectivity is observed for the conversion of the alloy layers relative to the Si layers. The degree of selectivity is found to depend on alloy-layer thickness and strain. Superlattices have been fabricated from 1-micron wide mesas with Si(0.7)Ge(0.3) layers fully converted to 5-nm thick porous amorphous material.

Fathauer, R. W.↗
NASA NTRS1992

Co diffusion and growth of buried single-crystal CoSi2 in Si(111) by endotaxy

At a growth temperature of 800 C, Co deposited on a Si capping layer exhibits oriented growth on buried CoSi2 grains on Si(111), a process referred to as endotaxy. This occurs preferentially to surface nucleation of CoSi2, provided the thickness of the Si cap is less than a critical value of about 100 nm for deposition rates of 0.003-0.01 nm/s. The steady-state process is modeled using known values of the Co diffusion coefficient and solid solubility in Si, allowing some conclusions to be drawn regarding parameters relevant to CoSi2 epitaxy. Using this technique, single-crystal continuous layers of CoSi2 can be formed under a high-quality Si capping layer.

Fathauer, R. W.↗
NASA NTRS1992

Surface morphology of molecular-beam epitaxially grown Si(1-x)Ge(x) layers on (100) and (110) Si

The surface morphology and dislocation structure of Si(1-x)Ge(x) layers grown on (100) and (110) Si substrates have been investigated using atomic force microscopy, and scanning and transmission electron microscopy. The layers, which have up to a 1.2 percent lattice mismatch with the substrates, were grown by molecular-beam epitaxy at 550 C at thicknesses above those required for the introduction of dislocations. Si(1-x)Ge(x) layers grown on (100) show a crosshatch morphology which is correlated to the underlying misfit dislocation network. Annealing greatly enhances the surface roughness producing a partial islanding growing on the preexisting crosshatch morphology. On the (110) substrates no annealing is necessary to produce a roughened surface. The roughened surface morphology is analyzed as a strain-reducing growth mode which enables partial relaxation of the near-surface atomic planes.

Pike, W. T.↗
NASA NTRS1992

Microstructural investigations of light-emitting porous Si layers

The structural and morphological characteristics of visible-light-emitting porous Si layers produced by anodic and stain etching of single-crystal Si substrates are compared using transmission electron microscopy and atomic force microscopy (AFM). AFM of conventionally anodized, laterally anodized and stain-etched Si layers show that the layers have a fractal-type surface morphology. The anodized layers are rougher than the stain-etched films. At higher magnification 10 nm sized hillocks are visible on the surface. Transmission electron diffraction patterns indicate an amorphous structure with no evidence for the presence of crystalline Si in the near-surface regions of the porous Si layers.

George, T.↗