Engineering Papers⌕ Search

Engineering topics

Pieters, C. M.

Publications and source records attributed to Pieters, C. M..

104 records · Page 6

Strength of mineral absorption features in the transmitted component of near-infrared reflected light - First results from RELAB

Bidirectional reflectance measurements are the only type of reflectance data available to the remote observer. For compositional interpretations, data are desired not only for identification of possible mineral components but also for modal abundance. The latter requires detailed information about the strength of absorption features. Using a new laboratory facility, the RELAB, laboratory data in the near infrared are presented that document effects of particle size, mineral mixtures, and viewing geometry for selected materials with well-developed absorption bands. The commonly observed increase in reflectance with decrease in particle size is also observed for absorption bands as well as a related decrease in absorption strength. For small particles in parts of the spectrum of maximum reflectance, however, a minor decrease in reflectance with a decrese in particle size is sometimes observed. Small particles dominate the observed characteristics of particulate surfaces, which contain a range of particle sizes. The mean optical path length (transmission through particles) of reflected radiation measured for a variety of particle sizes has an apparent upper limit of about 2 mm for particles of less than 250 microns. The typical number of particles involved in the optical path is less than 50.

Pieters, C. M.↗

Possible lunar source areas of meteorite ALHA 81005 Geochemical remote sensing information

Antarctic meteorite ALHA 81005 is a regolith breccia apparently sent to earth by an impact event in the lunar highlands. Laboratory studies of this sample provide information that is used to understand the source region on the moon using remote sensing data. The meteorites low thorium content is inconsistent with thorium values measured for the central lunar nearside from orbit with Apollo gamma-ray spectrometers. Similarly, the mineral assemblages inferred from near-IR spectra of small impact craters on the lunar nearside do not exhibit the significant component of olivine and Fe-bearing feldspar that is observed in the meteorite spectra. The existing remote sensing data suggest the most probable source region for ALHA 81005 is the nearside limb or the lunar farside and that the composition of ALHA 81005 represents a surface unit that has not previously been extensively sampled.

Pieters, C. M.↗

Mars: Definition and characterization of global surface units with emphasis on composition

Viking 2 approach maps of red and violet normal albedo are used to define units of similar optical properties for a large area of the Martian surface. Computer processing of these data reveals clusters of albedo values relating to specific, contiguous regions of the planet, with some unit boundaries being of a gradational nature while others are more discrete. A study of the albedo properties of analog materials measured in the laboratory, and of telescopic spectrophotometry of Mars, indicates that both hydroxylated and hematitic oxidized materials exist on the surface. The most probable surface expression of global dust and/or high albedo soils is in the classical bright region, Arabia. Most low albedo features in the region studied have red and violet albedos that are consistent with a dark substrate, such as basalt, coated by, or mixed with, a fine grained alteration product.

Mccord, T. B.↗

Copernicus crater central peak - Lunar mountain of unique composition

Olivine is identified as the major mafic mineral in a central peak of Copernicus crater. Information on the mineral assemblages of such unsampled lunar surface material is provided by near infrared reflectance spectra (0.7 to 2.5 micrometers) obtained with earth-based telescopes. The composition of the deep-seated material comprising the Copernicus central peak is unique among measured areas. Other lunar terra areas and the wall of Copernicus exhibit spectral characteristics of mineral assemblages comparable to the feldspathic breccias returned by the Apollo missions, with low-calcium orthopyroxene being the major mafic mineral.

Pieters, C. M.↗

Core segment 15008 - Regolith stratigraphy at Apennine Front Station 2 using multispectral imaging

High precision multispectral images for Apennine Front core segment 15008 are presented. These data have a spatial resolution less than approximately 0.5 mm and are analyzed for their compositional information using image analysis techniques. The stratigraphy of the regolith sampled by 15008 is documented here as three distinct zones, the most prominent of which is a feldspathic fragment-rich zone with a chaotic fabric that occurs between 10 and 18 cm depth. It is suggested that this material is the primary rim crest deposit of the local 10 m crater. Above this zone the stratigraphy is more horizontal in nature. Below this zone the soil is observed to be relatively homogeneous with no distinctive structure to 23 cm depth.

Pieters, C. M.↗

Moon - Near-infrared spectral reflectance, a first good look

Spectral reflectance contains direct information on the mineralogy of the surface soils and rocks. A problem concerning the employment of remote spectral-reflectance sensing techniques for mineralogical studies is related to the lack of photometrically precise spectra of planetary surfaces in the region from 1.0 to 2.5 micrometers, where additional important mineral absorptions occur. Recently, a new instrument was developed, and an observational program is underway to provide the required near-infrared spectra. The first, comprehensive near-infrared spectroscopic results for the moon are presented. It is shown that it is equally possible to derive quantitative mineralogical information about the lunar surface by using remotely sensed reflectance spectra as it is by using laboratory reflectance measurements of lunar samples.

Mccord, T. B.↗

Late high-titanium basalts of the western maria - Geology of the Flamsteed region of Oceanus Procellarum

The evolution, geology, geochemistry and topology of the Flamsteed region of Oceanus Procellarum are examined, considering remote sensing data including multispectral images and spectral reflectance measurements along with crater degradation studies and radar backscatter. Seven spectrally distinct basaltic units ranging in age from 2.5 plus or minus 0.5 to 3.5 plus or minus 0.5 billion years have been identified. The earliest units of the mapped area are composed of highlands material and include partially flooded impact craters, and the oldest surface exposed mare basalts are very low Ti basalts of the Telemann formation.

Pieters, C. M.↗

Multispectral imaging of the lunar regolith core samples - Preliminary results for 74002

Multispectral images of a lunar core segment are a new form of continuous data along the length of the core. A new laboratory arrangement was developed to obtain these images. Data processing and initial data analysis for core section 74002 were performed. The images are sensitive to variations in mineralogy and/or maturity of the soil and are easily used (1) in stratigraphic studies of the lunar regolith, (2) for sample selection of representative material, and (3) as ground truth for remote sensing studies.

Pieters, C. M.↗

Mare Crisium geologic units - Implications of additional remote sensing data

Additional spectral reflectance data are presented for the Mare Crisium region. This new remote sensing information supports and supplements the subdivision of Mare Crisium into three major basalt units and shows further that: (1) the Luna 24 landing site is on a small region apparently surrounded by distinctly different units, but is clearly correlated with basalt Group IIA of Head et al. (1978); (2) exposures of Group IIB basalt in the northern and southern parts of the basin are spectrally similar; and (3) Group I basalts along the eastern part of the basin, which have been proposed to be relatively young (Boyce and Johnson, 1977), are spectrally similar to older Group I basalts.

Pieters, C. M.↗

Multispectral mapping of the Apollo 15-Apennine region - The identification and distribution of regional pyroclastic deposits

Multispectral mapping of the Apollo 15-Apennine region has allowed the identification of numerous dark mantle deposits of probable pyroclastic origin. The deposits display a low albedo, appear to mantle and slightly subdue subjacent terrain, are spectrally distinct on the multispectral maps (high in the infrared but low in the ultraviolet) and generally exhibit a weak depolarized 3.8 cm radar echo. These characteristics are consistent with an origin by pyroclastic eruption. The regional dark mantle deposits are commonly associated with vents along marginal fractures and faults near the base of the Apennines, thereby emphasizing the role of basin-controlled weaknesses in providing channels for the upward migration of magma generated at depth. The spectral properties of the pyroclastic deposits are incompatible with those of Apollo 15 green glass but the deposits may be composed of material similar to the Apollo 15 brown or yellow glass. If so, the widespread distribution of the deposits suggest that mare basalts genetically related to the brown or yellow glass may occur in the Apollo 15 region. Moreover, pyroclastic volcanic activity has apparently been a more important and widespread process in the Apollo 15-Apennine region than has previously been thought.

Hawke, B. R.↗

Mare basalt types on the front side of the moon - A summary of spectral reflectance data

A unit map of nearside basalt types has been prepared from all telescopic spectral reflectance data currently available for lunar soils. Four parameters were chosen (UV/VIS ratio, albedo, 1 micron band strength, 2 micron band strength) to distinguish and map each of 13 mare basalt types and three additional volcanic groups. Multispectral imagery and albedo maps were used to define unit boundaries while spectra were used to examine the 1 and 2 micron bands and calibrate and quantify the multispectral images. Although the volume of each basalt type is not known, it is clear from the unit map that only 1/3 to 1/2 of the surface basalt types are likely to be represented in the returned lunar samples. For mature lunar soils a single parameter alone does not provide chemical information, but when the four are used together, TiO2 and in some cases FeO can be estimated. Further study of the mineralogy of unsampled lunar basalts requires precise spectra to 2.5 microns with higher spectra and spatial resolution.

Pieters, C. M.↗