Engineering Papers⌕ Search

Engineering topics

Pham, Thang

Publications and source records attributed to Pham, Thang.

30 records · Page 2

The New CCSDS Standard for Low-Complexity Lossless and Near-Lossless Multispectral and Hyperspectral Image Compression

This paper describes the emerging Issue 2 of the CCSDS-123.0-B standard for low-complexity compression of multispectral and hyperspectral imagery, focusing on its new features and capabilities. Most significantly, this new issue incorporates a closed-loop quantization scheme to provide near-lossless compression capability while still supporting lossless compression, and introduces a new entropy coding option that provides better compression of low-entropy data.

Kiely, Aaron B.↗

Torsional instability in the single-chain limit of a transition metal trichalcogenide

The scientific bounty resulting from the successful isolation of few to single layers of two-dimensional materials suggests that related new physics resides in the few- to single-chain limit of one-dimensional materials. We report the synthesis of the quasi–one-dimensional transition metal trichalcogenide NbSe 3 (niobium triselenide) in the few-chain limit, including the realization of isolated single chains. The chains are encapsulated in protective boron nitride or carbon nanotube sheaths to prevent oxidation and to facilitate characterization. Transmission electron microscopy reveals static and dynamic structural torsional waves not found in bulk NbSe 3 crystals. Electronic structure calculations indicate that charge transfer drives the torsional wave instability. Very little covalent bonding is found between the chains and the nanotube sheath, leading to relatively unhindered longitudinal and torsional dynamics for the encapsulated chains.

36 MATERIALS SCIENCE↗

Effects of ambient humidity and temperature on the NO 2 sensing characteristics of WS 2 /graphene aerogel

The effects of ambient humidity and temperature on the NO 2 sensing characteristics of WS 2 /graphene aerogel (WS 2 /GA) composite are investigated. In order to probe the gas sensing performances of WS 2 /GA, the sensor is fabricated by integrating WS 2 /GA with a microfabricated two-electrode device. The WS 2 /GA is characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), Raman spectroscopy, X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and nitrogen porosimetry. This hybrid nanomaterial is found to improve the selectivity to NO 2 , compared to control graphene and WS 2 aerogels. The NO 2 sensing performance of the WS 2 /GA-based sensors is investigated under different relative humidities (0–60%), and ambient temperatures (room temperature (RT) to 180 °C). In all instances, the sensors exhibit p-type behavior. In dry atmosphere, faster response and better recovery are obtained with increasing temperature, reaching optimum sensing performance around 180 °C. At room temperature, interestingly, humidity is found helpful for enhancing the response and recovery of the sensor to NO 2 . Detection limits in the range of 10–15 ppb NO 2 were determined. A potential gas sensing mechanism for this composite aerogel is introduced.

36 MATERIALS SCIENCE↗

Fabrication of Subnanometer-Precision Nanopores in Hexagonal Boron Nitride

Here, we demonstrate the fabrication of individual nanopores in hexagonal boron nitride (h-BN) with atomically precise control of the pore shape and size. Previous methods of pore production in other 2D materials typically create pores with irregular geometry and imprecise diameters. In contrast, other studies have shown that with careful control of electron irradiation, defects in h-BN grow with pristine zig-zag edges at quantized triangular sizes, but they have failed to demonstrate production and control of isolated defects. In this work, we combine these techniques to yield a method in which we can create individual size-quantized triangular nanopores through an h-BN sheet. The pores are created using the electron beam of a conventional transmission electron microscope; which can strip away multiple layers of h-BN exposing single-layer regions, introduce single vacancies, and preferentially grow vacancies only in the single-layer region. We further demonstrate how the geometry of these pores can be altered beyond triangular by changing beam conditions. Precisely size- and geometry-tuned nanopores could find application in molecular sensing, DNA sequencing, water desalination, and molecular separation.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Density Tunable Graphene Aerogels Using a Sacrificial Polycyclic Aromatic Hydrocarbon

In this paper, we demonstrate a new strategy to tune the density of graphene aerogels. This facile method is capable of producing graphene aerogels over a wide density range without compromising the morphology or quality of the material. Perylenetetracarboxylic acid dianydride serves as a sacrificial filler material that can be thermally decomposed to yield a graphene aerogel with tunable density.

36 MATERIALS SCIENCE↗

Synthesis of graphene nanoribbons inside boron nitride nanotubes

We report on bottom‐up synthesis of graphene nanoribbons inside boron nitride nanotubes, using coronene molecules as building blocks. The synthesized ribbons are one or two coronene molecules wide, depending on the diameter of the host nanotube. The encapsulated carbon nanostructures can be eliminated from the inner cavity of the filled boron nitride nanotube via oxidation without any damage to the nanotube structure.

Barzegar, Hamid Reza↗

High Surface Area MoS 2 /Graphene Hybrid Aerogel for Ultrasensitive NO 2 Detection

A MoS 2 /graphene hybrid aerogel synthesized with two-dimensional MoS 2 sheets coating a high surface area graphene aerogel scaffold is characterized and used for ultrasensitive NO 2 detection. The combination of graphene and MoS 2 leads to improved sensing properties with the graphene scaffold providing high specific surface area and high electrical and thermal conductivity and the single to few-layer MoS2 sheets providing high sensitivity and selectivity to NO 2 . The hybrid aerogel is integrated onto a low-power microheater platform to probe the gas sensing performance. At room temperature, the sensor exhibits an ultralow detection limit of 50 ppb NO 2 . By heating the material to 200 °C, the response and recovery times to reach 90% of the final signal decrease to <1 min, while retaining the low detection limit. The MoS 2 /graphene hybrid also shows good selectivity for NO 2 against H 2 and CO, especially when compared to bare graphene aerogel. The unique structure of the hybrid aerogel is responsible for the ultrasensitive, selective, and fast NO 2 sensing. The improved sensing performance of this hybrid aerogel also suggests the possibility of other 2D material combinations for further sensing applications.

36 MATERIALS SCIENCE↗

Platinum Nanoparticle Loading of Boron Nitride Aerogel and Its Use as a Novel Material for Low-Power Catalytic Gas Sensing

We report that a high-surface-area, highly crystalline boron nitride aerogel synthesized with nonhazardous reactants has been loaded with crystalline platinum nanoparticles to form a novel nanomaterial that exhibits many advantages for use in a catalytic gas sensing application. The platinum nanoparticle-loaded boron nitride aerogel integrated onto a microheater platform allows for calorimetric propane detection. The boron nitride aerogel exhibits thermal stability up to 900 °C and supports disperse platinum nanoparticles, with no sintering observed after 24 h of high-temperature testing. The high thermal conductivity and low density of the boron nitride aerogel result in an order of magnitude faster response and recovery times (<2 s) than reported on alumina support and allow for 10% duty cycling of the microheater with no loss in sensitivity. Lastly, the resulting 1.5 mW sensor power consumption is two orders of magnitude less than commercially available catalytic gas sensors and unlocks the potential for wireless, battery-powered catalytic gas sensing.

36 MATERIALS SCIENCE↗

Nanoscale structure and superhydrophobicity of sp 2 -bonded boron nitride aerogels

Aerogels have much potential in both research and industrial applications due to their high surface area, low density, and fine pore size distribution. Here we report a thorough structural study of three-dimensional aerogels composed of highly crystalline sp 2 -bonded boron nitride (BN) layers synthesized by a carbothermic reduction process. The structure, crystallinity and bonding of the as-prepared BN aerogels are elucidated by X-ray diffraction, 11 B nuclear magnetic resonance, transmission electron microscopy, and resonant soft X-ray scattering. The macroscopic roughness of the aerogel's surface causes it to be superhydrophobic with a contact angle of ~155° and exhibit high oil uptake capacity (up to 1500 wt%). In conclusion, the oil can be removed from the BN aerogel by oxidizing in air without damaging the crystalline porous structure of the aerogel or diminishing its oil absorption capacity.

36 MATERIALS SCIENCE↗

Catalytic hydrogen sensing using microheated platinum nanoparticle-loaded graphene aerogel

We present that low power catalytic hydrogen sensors are fabricated by functionalizing low power polysilicon microheaters with platinum nanoparticle catalyst loaded in a high surface area graphene aerogel support. Fabrication and characterization of the polysilicon microheaters are described. The platinum nanoparticle-loaded graphene aerogel is characterized by transmission electron microscopy, scanning electron microscopy, and energy dispersive X-ray spectroscopy. Finally, the catalytic hydrogen sensors consume as little as 2.2 mW of power, have sensitivity of 1.6%/10,000 ppm hydrogen, a t90 response and recovery time of 0.97 s and 0.72 s, respectively, a lower detection limit of approximately 65 ppm, and negligible cross sensitivity to methane, n-pentane, and diethylether.

08 HYDROGEN↗