Engineering topics

Petro, Andrew

Publications and source records attributed to Petro, Andrew.

29 records · Page 2

NASA NTRS2014

Nodes - Network & Operation Demonstration Satellite

Nodes is a technology demonstration mission that will launch from the International Space Station (ISS) in early 2015 and will demonstrate new network capabilities critical to the operation of swarms of multiple spacecraft. Nodes continues the legacy of the PhoneSat series of small satellites that first introduced and successfully implemented the use of Android Smartphone technology to perform many of the spacecraft functions previously accomplished through custom technology development efforts. The Nodes mission consists of two 1.5-unit (1.5U) nanosatellites each weighing approximately 2 kilograms (4 pounds) and measuring 10 centimeters by 10 centimeters by 15 centimeters. The Nodes spacecraft are derived from the hardware and software developed for the EDSN (Edison Demonstration of Smallsat Networks) mission (a swarm of eight spacecraft). Each Node utilizes the Android operating system with EDSN-specific software programmed to perform command and data handling tasks that allow the satellites to 1) relay ground commands through one satellite to the second satellite, 2) collect and relay science data from each satellite to the ground station, and 3) autonomously determine which of the two satellites is best suited to control the space network and relay data to the ground (“Captain”) and notify the ground system and second satellite (“Lieutenant”) of the result.

Network and Operations↗

NASA NTRS2013

PhoneSat - The Smartphone Nanosatellite

PhoneSat 2.4, carried into space on November 19, 2013 aboard a Minotaur I rocket from the Mid-Atlantic Regional Spaceport at NASAs Wallops Flight Facility in Virginia, is the first of the PhoneSat family to use a two-way S-band radio to allow engineers to command the satellite from Earth. This mission also serves as a technology demonstration for a novel attitude determination and control system (ADCS) that establishes and stabilizes the satellites attitude relative to Earth. Unlike the earlier PhoneSats that used a Nexus One, PhoneSat 2.4 uses the Nexus S smartphone, which runs Googles Android operating system, and is made by Samsung Electronics Co., Suwon, So. Korea. The smartphone provides many of the functions needed by the satellite such as a central computer, data memory, ready-made interfaces for communications, navigation and power all pre-assembled in a rugged electronics package.

PhoneSat↗

NASA NTRS2013

PhoneSat - The Smartphone Nanosatellite

NASA's PhoneSat project tests whether spacecraft can be built using smartphones to launch the lowest-cost satellites ever flown in space. Each PhoneSat nanosatellite is one cubesat unit - a satellite in a 10 cm (approx. 4 inches) cube or about the size of a tissue box - and weighs approximately 1 kg (2.2 pounds). Engineers believe PhoneSat technology will enable NASA to launch multiple new satellites capable of conducting science and exploration missions at a small fraction of the cost of conventional satellites.

COTS satellite components↗

NASA NTRS2013

PhoneSat - The Smartphone Nanosatellite

NASAs PhoneSat project will test whether spacecraft can be built using smartphones to launch the lowest-cost satellites ever flown in space. Each PhoneSat nanosatellite is one cubesat unit - a satellite in a 10 cm (approx. 4 inches) cube or about the size of a tissue box - and weighs approximately three pounds. Engineers believe PhoneSat technology will enable NASA to launch multiple new satellites capable of conducting science and exploration missions at a small fraction of the cost of conventional satellites.

COTS satellite components↗

NASA NTRS2009

Orbiting Depot and Reusable Lander for Lunar Transportation

A document describes a conceptual transportation system that would support exploratory visits by humans to locations dispersed across the surface of the Moon and provide transport of humans and cargo to sustain one or more permanent Lunar outpost. The system architecture reflects requirements to (1) minimize the amount of vehicle hardware that must be expended while maintaining high performance margins and (2) take advantage of emerging capabilities to produce propellants on the Moon while also enabling efficient operation using propellants transported from Earth. The system would include reusable single- stage lander spacecraft and a depot in a low orbit around the Moon. Each lander would have descent, landing, and ascent capabilities. A crew-taxi version of the lander would carry a pressurized crew module; a cargo version could carry a variety of cargo containers. The depot would serve as a facility for storage and for refueling with propellants delivered from Earth or propellants produced on the Moon. The depot could receive propellants and cargo sent from Earth on a variety of spacecraft. The depot could provide power and orbit maintenance for crew vehicles from Earth and could serve as a safe haven for lunar crews pending transport back to Earth.

Petro, Andrew↗

NASA NTRS2006

Simplified Fabrication of Helical Copper Antennas

A simplified technique has been devised for fabricating helical antennas for use in experiments on radio-frequency generation and acceleration of plasmas. These antennas are typically made of copper (for electrical conductivity) and must have a specific helical shape and precise diameter.

Petro, Andrew↗

NASA NTRS2001

The Evolution of the VASIMR Engine

Our future deep space explorers face many daunting challenges but three of these loom high above the rest: Physiological debilitation, radiation sickness and psychological stress. Many countermeasures are presently being considered to ameliorate these difficulties however, in the long run, two important new developments are required: abundant space power and advanced propulsion. The development of the Variable Specific Impulse Magnetoplasma Rocket (VASIMR) addresses these important areas of need. The VASIMR is a high power, radio frequency-driven magneto plasma rocket, capable of very high exhaust velocities. In addition, its unique architecture allows in-flight mission-optimization of thrust and specific impulse to enhance performance and reduce trip time. A NASA-led, research team, involving industry, academia and government facilities is pursuing the development of this concept in the United States. The technology can be validated, in the near term, in venues such as the International Space Station, where it can also serve as both a drag compensation device and a plasma contactor for the orbital facility. Other near-Earth applications in the commercial and scientific satellite sectors are also envisioned. This presentation covers the present status of the technology, plans for its near term deployment and a vision for its future evolution.

Chang-Diaz, F. R.↗

NASA NTRS2000

A Flight Demonstration of Plasma Rocket Propulsion

The Advanced Space Propulsion Laboratory at the NASA Johnson Space Center has been engaged in the development of a variable specific impulse magnetoplasma rocket (V ASIMR) for several years. This type of rocket could be used in the future to propel interplanetary spacecraft and has the potential to open the entire solar system to human exploration. One feature of this propulsion technology is the ability to vary its specific impulse so that it can be operated in a mode that maximizes propellant efficiency or a mode that maximizes thrust. Variation of specific impulse and thrust enhances the ability to optimize interplanetary trajectories and results in shorter trip times and lower propellant requirements than with a fixed specific impulse. In its ultimate application for interplanetary travel, the VASIMR would be a multi-megawatt device. A much lower power system is being designed for demonstration in the 2004 timeframe. This first space demonstration would employ a lO-kilowatt thruster aboard a solar powered spacecraft in Earth orbit. The 1O-kilowatt V ASIMR demonstration unit would operate for a period of several months with hydrogen or deuterium propellant with a specific impulse of 10,000 seconds.

Petro, Andrew↗

NASA NTRS1999

A Flight Demonstration of Plasma Rocket Propulsion

The Advanced Space Propulsion Laboratory at the Johnson Space Center has been engaged in the development of a magneto-plasma rocket for several years. This type of rocket could be used in the future to propel interplanetary spacecraft. One advantageous feature of this rocket concept is the ability to vary its specific impulse so that it can be operated in a mode which maximizes propellant efficiency or a mode which maximizes thrust. This presentation will describe a proposed flight experiment in which a simple version of the rocket will be tested in space. In addition to the plasma rocket, the flight experiment will also demonstrate the use of a superconducting electromagnet, extensive use of heat pipes, and possibly the transfer of cryogenic propellant in space.

Petro, Andrew↗

NASA NTRS1995

A Simple Space Station Rescue Vehicle

Early in the development of the Space Station it was determined that there is a need to have a vehicle which could be used in the event that the Space Station crew need to quickly depart and return to Earth when the Space Shuttle is not available. Unplanned return missions might occur because of a medical emergency, a major Space Station failure, or if there is a long-term interruption in the delivery of logistics to the Station. The rescue vehicle ms envisioned as a simple capsule-type spacecraft which would be maintained in a dormant state at the Station for several years and be quickly activated by the crew when needed. During the assembly phase for the International Space Station, unplanned return missions will be performed by the Russian Soyuz vehicle, which can return up to three people. When the Station assembly is complete there will be a need for rescue capability for up to six people. This need might be met by an additional Soyuz vehicle or by a new vehicle which might come from a variety of sources. This paper describes one candidate concept for a Space Station rescue vehicle. The proposed rescue vehicle design has the blunt-cone shape of the Apollo command module but with a larger diameter. The rescue vehicle would be delivered to the Station in the payload bay of the Space Shuttle. The spacecraft design can accommodate six to eight people for a one-day return mission. All of the systems for the mission including deorbit propulsion are contained within the conical spacecraft and so there is no separate service module. The use of the proven Apollo re-entry shape would greatly reduce the time and cost for development and testing. Other aspects of the design are also intended to minimize development cost and simplify operations. This paper will summarize the evolution of rescue vehicle concepts, the functional requirements for a rescue vehicle, and describe the proposed design.

Petro, Andrew↗

NASA NTRS1989

Cost estimates for removal of orbital debris

While there are currently no active measures for the removal of nonfunctional satellites or spent rocket stages from earth orbit, it has been deemed prudent to begin to identify and economically evaluate potential approaches for such orbital decluttering. The methods presently considered encompass retrieval with an OMV, forcible deorbiting via attached propulsive devices, and deorbiting via passive, drag-augmentation devices; the increases in payload-delivery costs they represent are respectively $15-20 million/object, $7.8 million/vehicle, and $5.5-15.5 million/unit. OMV removal appears the least economically feasible method.

Petro, Andrew↗