Engineering Papers⌕ Search

Engineering topics

Peter Tenenbaum

Publications and source records attributed to Peter Tenenbaum.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2021

Two Bright M Dwarfs Hosting Ultra-Short-Period Super-Earths with Earth-like Compositions

We present observations of two bright M dwarfs (TOI-1634 and TOI-1685: J = 9.5–9.6) hosting ultra-short-period (USP) planets identified by the TESS mission. The two stars are similar in temperature, mass, and radius (T eff ≈ 3500 K, M ⋆ ≈ 0.45–0.46 M ⊙ , and R ⋆ ≈ 0.45–0.46 R ⊙ ), and the planets are both super-Earth size (1.25 R ⊕ < R p < 2.0 R ⊕ ). For both systems, light curves from ground-based photometry exhibit planetary transits, whose depths are consistent with those from the TESS photometry. We also refine the transit ephemerides based on the ground-based photometry, finding the orbital periods of P = 0.9893436 ± 0.0000020 days and P = 0.6691416 ± 0.0000019 days for TOI-1634b and TOI-1685b, respectively. Through intensive radial velocity (RV) observations using the InfraRed Doppler (IRD) instrument on the Subaru 8.2 m telescope, we confirm the planetary nature of the TOIs and measure their masses: 10.14 ± 0.95 M ⊕ and 3.43 ± 0.93 M ⊕ for TOI-1634b and TOI-1685b, respectively, when the observed RVs are fitted with a single-planet circular-orbit model. Combining those with the planet radii of R p = 1.749 ± 0.079 R ⊕ (TOI-1634b) and 1.459 ± 0.065 R ⊕ (TOI-1685b), we find that both USP planets have mean densities consistent with an Earth-like internal composition, which is typical for small USP planets. TOI-1634b is currently the most massive USP planet in this category, and it resides near the radius valley, which makes it a benchmark planet in the context of discussing the size limit of rocky planet cores as well as testing the formation scenarios for USP planets. Excess scatter in the RV residuals for TOI-1685 suggests the presence of a possible secondary planet or unknown activity/instrumental noise in the RV data, but further observations are required to check those possibilities.

Teruyuki Hirano↗
NASA NTRS2020

TESS Science Data Products Description Document: EXP-TESS-ARC-ICD-0014 Rev F

This document discusses data product formats that are produced primarily by the TESS Science Processing Operations Center (SPOC) at NASA Ames Research Center. Data products are sent to the TESS Science Operations Center (SOC) at MIT where they are disseminated to the Mikulski Archive for Space Telescopes (MAST) and the TESS Science Office (TSO).

TESS↗
NASA NTRS2020

TOI-824 b: A New Planet on the Lower Edge of the Hot Neptune Desert

We report the detection of a transiting hot Neptune exoplanet orbiting TOI-824 (SCR J1448-5735), a nearby (d = 64 pc) K4V star, using data from the Transiting Exoplanet Survey Satellite. The newly discovered planet has a radius Rp = 2.93 ± 0.20 Rꚛ and an orbital period of 1.393 days. Radial velocity measurements using the Planet Finder Spectrograph and the High Accuracy Radial velocity Planet Searcher spectrograph confirm the existence of the planet, and we estimate its mass to be 18.47 ± 1.84 Mꚛ. The planet's mean density is ρ(p)= 4.03 (+0.98,-0.78)g/cu. cm, making it more than twice as dense as Neptune. TOI-824 b's high equilibrium temperature makes the planet likely to have a cloud-free atmosphere, and thus it is an excellent candidate for follow-up atmospheric studies. The detectability of TOI-824 b's atmosphere from both ground and space is promising and could lead to the detailed characterization of the most irradiated small planet at the edge of the hot Neptune desert that has retained its atmosphere to date.

Jennifer A. Burt↗
NASA NTRS2020

The First Habitable-zone Earth-sized Planet from TESS. I. Validation of the TOI-700 System

We present the discovery and validation of a three-planet system orbiting the nearby (31.1 pc) M2 dwarf star TOI-700 (TIC 150428135). TOI-700 lies in the TESS continuous viewing zone in the Southern Ecliptic Hemisphere; observations spanning 11 sectors reveal three planets with radii ranging from 1 R⊕ to 2.6 R⊕ and orbital periods ranging from 9.98 to 37.43 days. Ground-based follow-up combined with diagnostic vetting and validation tests enables us to rule out common astrophysical false-positive scenarios and validate the system of planets. The outermost planet, TOI-700 d, has a radius of 1.19 ± 0.11 R⊕ and resides within a conservative estimate of the host star's habitable zone, where it receives a flux from its star that is approximately 86% of Earth's insolation. In contrast to some other low-mass stars that host Earth-sized planets in their habitable zones, TOI-700 exhibits low levels of stellar activity, presenting a valuable opportunity to study potentially rocky planets over a wide range of conditions affecting atmospheric escape. While atmospheric characterization of TOI-700 d with the James Webb Space Telescope (JWST) will be challenging, the larger sub-Neptune, TOI-700 c (R = 2.63 R⊕), will be an excellent target for JWST and future space-based observatories. TESS is scheduled to once again observe the Southern Hemisphere, and it will monitor TOI-700 for an additional 11 sectors in its extended mission. These observations should allow further constraints on the known planet parameters and searches for additional planets and transit timing variations in the system.

Emily A. Gilbert↗
NASA NTRS2020

TOI-1235 b: A Keystone Super-Earth for Testing Radius Valley Emergence Models around Early M Dwarfs

Small planets on close-in orbits tend to exhibit envelope mass fractions of either effectively zero or up to a few percent depending on their size and orbital period. Models of thermally driven atmospheric mass loss and of terrestrial planet formation in a gas-poor environment make distinct predictions regarding the location of this rocky/nonrocky transition in period–radius space. Here we present the confirmation of TOI-1235 b (P = 3.44 days, r(p)=1.738(+0.087,-0.076)R(ꚛ)), a planet whose size and period are intermediate between the competing model predictions, thus making the system an important test case for emergence models of the rocky/nonrocky transition around early M dwarfs (R(s) = 0.630 ± 0.015 R(ꙩ), M(s) = 0.640 ± 0.016 M(ꙩ)). We confirm the TESS planet discovery using reconnaissance spectroscopy, ground-based photometry, high-resolution imaging, and a set of 38 precise radial velocities (RVs) from HARPS-N and HIRES. We measure a planet mass of 6.91(+0.75,-0.85) M(ꚛ), which implies an iron core mass fraction of 20(+15,-12)% in the absence of a gaseous envelope. The bulk composition of TOI-1235 b is therefore consistent with being Earth-like, and we constrain an H/He envelope mass fraction to be <0.5% at 90% confidence. Our results are consistent with model predictions from thermally driven atmospheric mass loss but not with gas-poor formation, suggesting that the former class of processes remains efficient at sculpting close-in planets around early M dwarfs. Our RV analysis also reveals a strong periodicity close to the first harmonic of the photometrically determined stellar rotation period that we treat as stellar activity, despite other lines of evidence favoring a planetary origin (P=21.8(+0.9,-0.8) days, m(p) sin i= 13.0(+3.8,-5.3)M(ꚛ)) that cannot be firmly ruled out by our data.

Ryan Cloutier↗
NASA NTRS2020

KELT-9 b's Asymmetric TESS Transit Caused by Rapid Stellar Rotation and Spin-Orbit Misalignment

KELT-9 b is an ultra-hot Jupiter transiting a rapidly rotating, oblate early-A-type star in a polar orbit. We model the effect of rapid stellar rotation on KELT-9 b’s transit light curve using photometry from the Transiting Exoplanet Survey Satellite to constrain the planet’s true spin–orbit angle and to explore how KELT-9 b may be influenced by stellar gravity darkening. We constrain the host star’s equatorial radius to be 1.089±0.017 times as large as its polar radius and its local surface brightness to vary by∼38% between its hot poles and cooler equator. We model the stellar oblateness and surface brightness gradient and find that it causes the transit light curve to lack the usual symmetry around the time of minimum light. We take advantage of the light-curve asymmetry to constrain KELT-9b’s true spin–orbit angle (87degree+ -10degrees/-11degrees), agreeing with Gaudi et al. that KELT-9 b is in a nearly polar orbit. We also apply a gravity-darkening correction to the spectral energy distribution model from Gaudi et al. and find that accounting for rapid rotation gives a better fit to available spectroscopy and yields a more reliable estimate for the star’s polar effective temperature.

Exoplanets↗
NASA NTRS2020

LHS 1815b: The First Thick-disk Planet Detected by TESS

We report the first discovery of a thick-disk planet, LHS 1815b (TOI-704b, TIC 260004324), detected in the Transiting Exoplanet Survey Satellite (TESS) survey. LHS 1815b transits a bright (V = 12.19 mag, K = 7.99 mag) and quiet M dwarf located 29.87 ± 0.02 pc away with a mass of 0.502 ± 0.015 M⊙ and a radius of 0.501 ± 0.030 R⊙. We validate the planet by combining space- and ground-based photometry, spectroscopy, and imaging. The planet has a radius of 1.088 ± 0.064 R⊕ with a 3σ mass upper limit of 8.7 M⊕. We analyze the galactic kinematics and orbit of the host star LHS 1815 and find that it has a large probability (Pthick/Pthin = 6482) to be in the thick disk with a much higher expected maximal height (Zmax = 1.8 kpc) above the Galactic plane compared with other TESS planet host stars. Future studies of the interior structure and atmospheric properties of planets in such systems using, for example, the upcoming James Webb Space Telescope, can investigate the differences in formation efficiency and evolution for planetary systems between different Galactic components (thick disks, thin disks, and halo).

LHS 1815b↗
NASA NTRS2019

HD 2685 b: a hot Jupiter orbiting an early F-type star detected by TESS

We report on the confirmation of a transiting giant planet around the relatively hot (T(eff) = 6801 ± 76 K) star HD2685, whose transit signal was detected in Sector 1 data of NASA’s TESS mission. We confirmed the planetary nature of the transit signal using Doppler velocimetric measurements with CHIRON, CORALIE, and FEROS, as well as using photometric data obtained with the Chilean-Hungarian Automated Telescope and the Las Cumbres Observatory. From the joint analysis of photometry and radial velocities, we derived the following parameters for HD2685 b: P = 4.12688(+0.00005,-0.00004) days, e = 0.091(+0.039, -0.047), MP = 1.17 ± 0.12 M(J) , and R(P) =1.44 ± 0.05 R(J). This system is a typical example of an inflated transiting hot Jupiter in a low-eccentricity orbit. Based on the apparent visual magnitude (V = 9.6 mag) of the host star, this is one of the brightest known stars hosting a transiting hot Jupiter, and it is a good example of the upcoming systems that will be detected by TESS during the two-year primary mission. This is also an excellent target for future ground- and space-based atmospheric characterization as well as a good candidate for measuring the projected spin-orbit misalignment angle through the Rossiter–McLaughlin effect.

Matías I. Jones↗
NASA NTRS2010

Kepler Instrument Performance: An In-Flight Update

The Kepler Mission is designed to detect the 80 parts per million (ppm) signal from an Earth-Sun equivalent transit. Such precision requires superb instrument stability on time scales up to 2 days and systematic error removal to better than 20 ppm. The sole scientic instrument is the Photometer, a 0.95 m aperture Schmidt telescope that feeds the 94.6 million pixel CCD detector array, which contains both Science and Fine Guidance Sensor (FGS) CCDs. Since Kepler's launch in March 2009, we have been using the commissioning and science operations data to characterize the instrument and monitor its performance. We find that the in-flight detector properties of the focal plane, including bias levels, read noise, gain, linearity, saturation, FGS to Science crosstalk,and video crosstalk between Science CCDs, are essentially unchanged from their pre-launch values. Kepler'sunprecedented sensitivity and stability in space have allowed us to measure both short- and long- term effects from cosmic rays, see interactions of previously known image artifacts with starlight, and uncover several unexpected systematics that affect photometric precision. Based on these results, we expect to attain Kepler's planned photometric precision over 90% of the field of view.

CCD↗
NASA NTRS2010

An Algorithm for the Fitting of Planet Models to Kepler Light Curves

We describe an algorithm which fits model planetary system parameters to light curves from Kepler Mission target stars. The algorithm begins by producing an initial model of the system which is used to seed the fit,with particular emphasis on obtaining good transit timing parameters. An attempt is then made to determine whether the observed transits are more likely due to a planet or an eclipsing binary. In the event that the transits are consistent with a transiting planet, an iterative fitting process is initiated: a wavelet-based whitening filter is used to eliminate stellar variations on timescales long compared to a transit; a robust nonlinear fitter operating on the whitened light curve produces a new model of the system; and the procedure iterates until convergence upon a self-consistent whitening filter and planet model. The fitted transits are removed from the light curve anda search for additional planet candidates is performed upon the residual light curve. The fitted models are used in additional tests which identify false positive planet detections: multiple planet candidates with near-identical fitted periods are far more likely to be an eclipsing binary, for example, while target stars in which the model lightcurve is correlated with the star centroid position may indicate a background eclipsing binary, and subtraction of all model planet candidates yields a light curve of pure noise and stellar variability, which can be used to study the probability that the planet candidates result from statistical fluctuations in the data.

Exoplanet↗
NASA NTRS2010

Photometric Analysis in the Kepler Science Operations Center Pipeline

We describe the Photometric Analysis (PA) software component and its context in the Kepler Science Operations Center (SOC) Science Processing Pipeline. The primary tasks of this module are to compute the photometric flux and photocenters (centroids) for over 160,000 long cadence (~thirty minute) and 512 short cadence (~one minute) stellar targets from the calibrated pixels in their respective apertures. We discuss science algorithms for long and short cadence PA: cosmic ray cleaning; background estimation and removal; aperture photometry; and flux-weighted centroiding. We discuss the end-to-end propagation of uncertainties for the science algorithms. Finally, we present examples of photometric apertures, raw flux light curves, and centroid time series from Kepler flight data. PA light curves, centroid time series, and barycentric timestamp corrections are exported to the Multi-mission Archive at Space Telescope [Science Institute] (MAST) and are made available to the general public in accordance with the NASA/Kepler data release policy.

photocenter↗
NASA NTRS2010

Focal Plane Geometry Characterization of the Kepler Mission

The Kepler Mission focal plane contains 42 charge-coupled device (CCD) photodetectors. Each CCD is composed of 2.2 million square pixels, 27 micrometers on a side, arranged in a grid of 2,200 columns by 1,044 rows. The science goals of the Kepler Mission require that the position of each CCD be determined with an accuracy of 0.1 pixels, corresponding to 2.7 micrometers or 0.4 seconds of arc, a level which is not achievable through pre-flight metrology. We describe a technique for determining the CCD positioning using images of the Kepler field of view (FOV) obtained in flight. The technique uses the fitted centroid row and column positions of 400 pre-selected stars on each CCD to obtain empirical polynomials which relate sky coordinates (right ascension and declination) to chip coordinates (row and column). The polynomials are in turn evaluated to produce constraints for a nonlinear model fit which directly determines the model parameters describing the location and orientation of each CCD. The focal plane geometry characterization algorithm is itself embedded in an iterative process which determines the focal plane geometry and the Pixel Response Function for each CCD in a self-consistent manner. In addition to the fully automated calculation, a person-in-the-loop implementation was developed to allow an initial determination of the geometry in the event of large misalignments, achieving a much looser capture tolerance for more modest accuracy and reduced automation.

ccd↗
NASA NTRSDate not supplied

Upping the Ante: The TESS Mission Shortens Full Frame Images to 10 Minutes and Introduces a Twenty-Second Data Collection Mode

The Transiting Exoplanet Survey Satellite (TESS) recently completed its initial two-year, near all-sky survey, identifying over 79 exoplanets and over 2000 exoplanet candidates. The mission is well on its way to find at least 50 small, nearby exoplanets for which masses can be ascertained and whose atmospheres can be characterized by ground- and space-based follow-on observations. TESS has unveiled a plethora of exciting non-exoplanet astrophysics results, such as asteroseismology, asteroids, and supernova. In the extended mission, TESS is collecting full frame images (FFIs) at 10-minute intervals rather than at 30-minute intervals, as was the case for the two-year primary mission. TESS is also collecting and providing photometry for up to 1000 20-sec targets in addition to the 20,000 target star postage stamps collected at 2-min intervals. The extended mission will also feature a five-month interval in which the 24°x96° field of view (FOV) will be rotated by 90°from its normal North-South orientation to observe a swath of the ecliptic plane. The FOVs for the remainder of the extended mission will be offset in latitude from those of the prime mission to help fill in the gaps in the full sky coverage. We discuss the performance and behavior of the data products generated by the TESS Science Processing Operations Center (SPOC) at NASA Ames Research Center and highlight the new 20-sec data mode and the 10-min FFIs. The TESS Mission is funded by NASA's Science Mission Directorate as an Astrophysics Explorer Mission.

TESS↗
NASA NTRSDate not supplied

TESS Science Processing Operations Center Pipeline Status and Updates

The past eighteen months have seen a number of important changes for the TESS Science Processing Operations Center (SPOC) and our archival data products as TESS embarked upon its first extended mission. First, the SPOC developed and deployed a new 20-sec cadence pipeline, promising to unveil exciting new astrophysics at these short timescales for up to 1000 targets per observing sector. We also developed an FFI light curve pipeline that creates light curves and associated data products for up to 160,000 targets in each sector and archive these as High-Level Science Products (HLSP) at the Mikulski Archive for Space Telescopes (MAST). Soon we plan to perform transiting planet searches on these light curves and to release Data Validation reports and associated data products to the MAST. We also present results from the first multi-year transiting planet search of sectors 1 through 36. Finally, we discuss major changes to the SPOC pipeline that motivated the reprocessing of the first year of data, including the application of target-and cadence-specific scattered light flags, and an update to the sky background correction algorithm to mitigate bias in the original algorithm for dim and/or severely crowded stars.

TESS↗
NASA NTRSDate not supplied

The TESS Mission Target Selection Procedure

We describe the target selection procedure by which stars are selected for 2 minute and 20 s observations by TESS. We first list the technical requirements of the TESS instrument and ground systems processing that limit the total number of target slots. We then describe algorithms used by the TESS Payload Operation Center (POC) to merge candidate targets requested by the various TESS mission elements (the Target Selection Working Group, TESS Asteroseismic Science Consortium, and Guest Investigator office). Lastly, we summarize the properties of the observed TESS targets over the two-year primary TESS mission. We find that the POC target selection algorithm results in 2.1–3.4 times as many observed targets as target slots allocated for each mission element. We also find that the sky distribution of observed targets is different from the sky distributions of candidate targets due to technical constraints that require a relatively even distribution of targets across the TESS fields of view. We caution researchers exploring statistical analyses of TESS planet-host stars that the population of observed targets cannot be characterized by any simple set of criteria applied to the properties of the input Candidate Target Lists.

Michael Fausnaugh↗