Engineering Papers⌕ Search

Engineering topics

Peres, G.

Publications and source records attributed to Peres, G..

At least 19 records

3D MHD MODELING OF TWISTED CORONAL LOOPS

We perform MHD modeling of a single bright coronal loop to include the interaction with a non-uniform magnetic field. The field is stressed by random footpoint rotation in the central region and its energy is dissipated into heating by growing currents through anomalous magnetic diffusivity that switches on in the corona above a current density threshold. We model an entire single magnetic flux tube in the solar atmosphere extending from the high- β chromosphere to the low- β corona through the steep transition region. The magnetic field expands from the chromosphere to the corona. The maximum resolution is ∼30 km. We obtain an overall evolution typical of loop models and realistic loop emission in the EUV and X-ray bands. The plasma confined in the flux tube is heated to active region temperatures (∼3 MK) after ∼2/3 hr. Upflows from the chromosphere up to ∼100 km s{sup −1} fill the core of the flux tube to densities above 10{sup 9} cm{sup −3}. More heating is released in the low corona than the high corona and is finely structured both in space and time.

79 ASTRONOMY AND ASTROPHYSICS↗

X-RAYING THE DARK SIDE OF VENUS—SCATTER FROM VENUS’ MAGNETOTAIL?

We analyze significant X-ray, EUV, and UV emission coming from the dark side of Venus observed with Hinode /XRT and Solar Dynamics Observatory /Atmospheric Imaging Assembly ( SDO /AIA) during a transit across the solar disk that occurred in 2012. As a check we have analyzed an analogous Mercury transit that occurred in 2006. We have used the latest version of the Hinode /XRT point spread function to deconvolve Venus and Mercury X-ray images, to remove instrumental scattering. After deconvolution, the flux from Venus’ shadow remains significant while that of Mercury becomes negligible. Since stray light contamination affects the XRT Ti-poly filter data we use, we performed the same analysis with XRT Al-mesh filter data, not affected by the light leak. Even the latter data show residual flux. We have also found significant EUV (304 Å, 193 Å, 335 Å) and UV (1700 Å) flux in Venus’ shadow, measured with SDO /AIA. The EUV emission from Venus’ dark side is reduced, but still significant, when deconvolution is applied. The light curves of the average flux of the shadow in the X-ray, EUV, and UV bands appear different as Venus crosses the solar disk, but in any of them the flux is, at any time, approximately proportional to the average flux in a ring surrounding Venus, and therefore proportional to that of the solar regions around Venus’ obscuring disk line of sight. The proportionality factor depends on the band. This phenomenon has no clear origin; we suggest that it may be due to scatter occurring in the very long magnetotail of Venus.

79 ASTRONOMY AND ASTROPHYSICS↗

EUV FLICKERING OF SOLAR CORONAL LOOPS: A NEW DIAGNOSTIC OF CORONAL HEATING

A previous work of ours found the best agreement between EUV light curves observed in an active region core (with evidence of super-hot plasma) and those predicted from a model with a random combination of many pulse-heated strands with a power-law energy distribution. We extend that work by including spatially resolved strand modeling and by studying the evolution of emission along the loops in the EUV 94 Å and 335 Å channels of the Atmospheric Imaging Assembly on board the Solar Dynamics Observatory. Using the best parameters of the previous work as the input of the present one, we find that the amplitude of the random fluctuations driven by the random heat pulses increases from the bottom to the top of the loop in the 94 Å channel and from the top to the bottom in the 335 Å channel. This prediction is confirmed by the observation of a set of aligned neighboring pixels along a bright arc of an active region core. Maps of pixel fluctuations may therefore provide easy diagnostics of nanoflaring regions.

79 ASTRONOMY AND ASTROPHYSICS↗

MAGNETOHYDRODYNAMIC MODELING OF THE ACCRETION SHOCKS IN CLASSICAL T TAURI STARS: THE ROLE OF LOCAL ABSORPTION IN THE X-RAY EMISSION

We investigate the properties of X-ray emission from accretion shocks in classical T Tauri stars (CTTSs), generated where the infalling material impacts the stellar surface. Both observations and models of the accretion process reveal several aspects that are still unclear: the observed X-ray luminosity in accretion shocks is below the predicted value, and the density versus temperature structure of the shocked plasma, with increasing densities at higher temperature, deduced from the observations, is at odds with that proposed in the current picture of accretion shocks. To address these open issues, we investigate whether a correct treatment of the local absorption by the surrounding medium is crucial to explain the observations. To this end, we describe the impact of an accretion stream on a CTTS by considering a magnetohydrodynamic model. From the model results, we synthesize the X-ray emission from the accretion shock by producing maps and spectra. We perform density and temperature diagnostics on the synthetic spectra, and we directly compare the results with observations. Our model shows that the X-ray fluxes inferred from the emerging spectra are lower than expected because of the complex local absorption by the optically thick material of the chromosphere and of the unperturbed stream. Moreover, our model, including the effects of local absorption, explains in a natural way the apparently puzzling pattern of density versus temperature observed in the X-ray emission from accretion shocks.

79 ASTRONOMY AND ASTROPHYSICS↗

A new look at Spitzer primary transit observations of the exoplanet HD 189733b

Blind source separation techniques are used to reanalyze two exoplanetary transit light curves of the exoplanet HD 189733b recorded with the IR camera IRAC on board the Spitzer Space Telescope at 3.6 μm during the 'cold' era. These observations, together with observations at other IR wavelengths, are crucial to characterize the atmosphere of the planet HD 189733b. Previous analyses of the same data sets reported discrepant results, hence the necessity of the reanalyses. The method we used here is based on the Independent Component Analysis (ICA) statistical technique, which ensures a high degree of objectivity. The use of ICA to detrend single photometric observations in a self-consistent way is novel in the literature. The advantage of our reanalyses over previous work is that we do not have to make any assumptions on the structure of the unknown instrumental systematics. Such 'admission of ignorance' may result in larger error bars than reported in the literature, up to a factor 1.6. This is a worthwhile tradeoff for much higher objectivity, necessary for trustworthy claims. Our main results are (1) improved and robust values of orbital and stellar parameters, (2) new measurements of the transit depths at 3.6 μm, (3) consistency between the parameters estimated from the two observations, (4) repeatability of the measurement within the photometric level of ∼2 × 10{sup –4} in the IR, and (5) no evidence of stellar variability at the same photometric level within one year.

79 ASTRONOMY AND ASTROPHYSICS↗

SOHO observations of the north polar solar wind

The observations performed with the ultraviolet coronagraph spectrometer (UVCS) are reported on. These observations concerned the Lyman alpha and O VI 1032 A and 1037 A lines and covered the heliocentric distance from 1.5 to 3.5 solar radii. The corresponding inner corona was observed with the coronal diagnostic spectrometer (CDS) and the solar ultraviolet measurement of emitted radiation (SUMER) in several chromospheric and coronal lines, including those observed with UVCS. The images provided an overall scenario of the polar coronal hole.

Peres, G.↗

Loop models of low coronal structures observed by the Normal Incidence X-Ray Telescope (NIXT)

The X-ray pictures obtained with the Normal Incidence X-Ray Telescope (NIXT), apart from the ubiquitous coronal loops well known from previous X-ray observations, show a new and peculiar morphology: in many active regions there are wide and apparently low-lying areas of intense emission which resemble H alpha plages. By means of hydrostatic models of coronal arches, we analyze the distribution of temperature, density, emission measure, and plasma emissivity in the spectral band to which NIXT is sensitive, and we show that the above morphology can be explained by the characteristics of high pressure loops having a thin region of high surface brightness at the base. We therefore propose that this finding might help to identify high-pressure X-ray emitting coronal regions in NIXT images, and it is in principle applicable to any imaging instrument which has high sensitivity to 10(exp 4) - 10(exp 6) K plasma within a narrow coronal-temperature passband. As a more general result of this study, we propose that the comparison of NIXT observations with models of stationary loops might provide a new diagnostic: the determination of the loop plasma pressure from measurements of brightness distribution along the loop.

Peres, G.↗

Numerical simulations of thermal instabilities in stratified gases. II - Exploration of the parameter space

The temporal evolution of density perturbations in an initially hydrostatic isothermal atmosphere consisting of an optically thin radiating compressible plasma is studied. Numerical techniques are used to describe the nonlinear evolution of the perturbations, and the relative equilibrium between dynamic and thermal instabilities as governed by three independent control parameters are examined, namely, the initial density contrast of the perturbation, the ratio of the local buoyancy oscillation period to the local radiative cooling time, and the ratio of the perturbation radius to the local scaleheight. Four orders of magnitude of initial density contrasts and ratios of buoyancy and cooling times, and one order of magnitude of the bubble dimensions are explored. Well-defined oscillations were found to occur in a limited parameter range, and thermal instability to occur even within secondary condensations deriving from the bubble fragmentation.

Reale, F.↗

Time variability of the X-ray sources in M33

The results of a variability study of the X-ray sources detected by the Einstein Observatory in the galaxy M33 are reported. Two of the 15 known sources are variable above the 99.73 percent confidence level. The light curve of one of these sources, M33 X-7, exhibits a variability pattern of high and low states, suggesting an eclipsing binary X-ray source. Such a finding would be the first identification of a close accreting binary system with an X-ray source in an external galaxy other than the Magellanic Clouds. The data suggest a binary period of 1.7857 day and an eclipse duration of about 0.4 day. The nuclear source M33 X-8 varies only in the softest part of the spectrum. The observations suggest a rapid variability and show a rapid flare with a rise time shorter than three days together with longer timescale variability.

Peres, G.↗

Morphology and spectral characteristics of the X-ray emission of M33

A previous analysis of the X-ray data on M33 has been extended to include a detailed study of the morpholgoy and spectral characteristics of the X-ray emission, and the results are reported. A low surface brightness, extended emission in the plane of the galaxy is detected. The X-ray luminosity of this component, about 10 to the 38th egs/s, is comparable to the total luminosity of the bright sources observed in the same region. Its radial distribution is similar to that of the blue light. The spectrum of the extended emission shows two distinct components: a hard one, with a temperature above 3 keV and a soft one with a temperature below 1 keV. The X-ray spectrum of the nuclear source, which is inconsistent with any of the known spectra of X-ray binary sources, can be fitted with either a low-temperature thermal emission or a steep power law model.

Trinchieri, G.↗

The energetics of the gradual phase

Reseachers compare results with those in the chapter by Moore et al. (1980), who reached five main conclusions about the gradual phase: (1) the typical density of the soft X-ray emitting plasma is between 10 to the 11th power and 10 to the 12th power cm-3 for compact flares and between 10 to the 10th power and 10 to the 11th power cm-3 for a large-area flare; (2) cooling is by conduction and radiation in roughly equal proportions; (3) continual heating is needed in the decay phase of two-ribbon flares; (4) continual heating is probably not needed in compact events; (5) most of the soft-X-ray-emitting plasma results from chromospheric evaporation. The goal was to reexamine these problems with the data from the Solar Maximum Mission (SMM) and other supporting instruments as well as to take advantage of recent theoretical advances. SMM is capable of measuring coronal temperatures more accurately and with a better cadence than has been possible before. The SMM data set is also unique in that the complete transit of an active region was observed, with soft X-ray and UV images being taken every few minutes. Researcher's were therefore able to establish the pre-flare conditions of the region and see whether anything has changed as a result of the flare. The assumptions made in attempting to determine the required plasma parameters are described. The derived parameters for the five prime flares are presented, and the role of numerical simulations is discussed.

Strong, K. T.↗

Intercomparison of numerical models of flaring coronal loops

The proposed Benchmark Problem consists of an infinitesimal magnetic flux tube containing a low-beta plasma. The field strength is assumed to be so large that the plasma can move only along the flux tube, whose shape remains invariant with time (i.e., the fluid motion is essentially one-dimensional). The flux tube cross section is taken to be constant over its entire length. In planar view the flux tube has a semi-circular shape, symmetric about its midpoint s = s sub max and intersecting the chromosphere-corona interface (CCI) perpendicularly at each foot point. The arc length from the loop apex to the CCI is 10,000 km. The flux tube extends an additional 2000 km below the CCI to include the chromosphere, which initially has a uniform temperature of 8000 K. The temperature at the top of the loop was fixed initially at 2 X 1 million K. The plasma is assumed to be a perfect gas (gamma = 5/3), consisting of pure hydrogen which is considered to be fully ionized at all temperatures. For simplicity, moreover, the electron and ion temperatures are taken to be everywhere equal at all times (corresponding to an artificially enhanced electron-ion collisional coupling). While there was more-or-less unanimous agreement as to certain global properties of the system behavior (peak temperature reached, thermal-wave time scales, etc.), no two groups could claim satisfactory accord when a more detailed comparison of solutions was attempted.

Kopp, R. A.↗

The X-ray corona of Procyon

X-ray emission from the nearby system Procyon A/B (F5 IV + DF) was detected, using the IPC (Imaging Proportional Counter) on board the Einstein Observatory. Analysis of the X-ray pulse height spectrum suggests that the observed X-ray emission originates in Procyon A rather than in the white dwarf companion Procyon B, since the derived X-ray temperature, log T = 6.2, agrees well with temperatures found for quiescent solar X-ray emission. Modeling Procyon's corona with loops characterized by some apex temperature Tmax and emission length scale L, it is found that Tmax is well constrained, but L, and consequently the filling factor of the X-ray emitting gas, are essentially unconstrained even when EUV emission from the transition region is included in the analysis.

Schmitt, J. H. M. M.↗

Closed coronal structures. V - Gasdynamic models of flaring loops and comparison with SMM observations

A time-dependent one-dimensional code incorporating energy, momentum and mass conservation equations, and taking the entire solar atmospheric structure into account, is used to investigate the hydrodynamic response of confined magnetic structures to strong heating perturbations. Model calculation results are compared with flare observations which include the light curves of spectral lines formed over a wide range of coronal flare temperatures, as well as determinations of Doppler shifts for the high temperature plasma. It is shown that the numerical simulation predictions are in good overall agreement with the observed flare coronal plasma evolution, correctly reproducing the temporal profile of X-ray spectral lines and their relative intensities. The predicted upflow velocities support the interpretation of the blueshifts as due to evaporation of chromospheric material.

Peres, G.↗

Coronal closed structures. IV - Hydrodynamical stability and response to heating perturbations

The response of magnetically confined atmospheres to perturbations in the temperature and density distribution, and the local heating rate by means of a one-dimensional time-dependent hydrodynamical code, which incorporates the full energy, momentum and mass conservation equations is studied. These studies extend the linear instability analysis of Habbal and Rosner (1979) into the finite-amplitude regime, and generalize the confined atmosphere models of Serio et al., to the time-dependent domain. The results show that closed coronal atmospheres are stable against finite-amplitude perturbations if the chromospheric response is taken into account; and observed correlated increases in coronal density and temperature can only be achieved under quiescent conditions by increasing the heat deposition rate relatively more in the chromosphere than in the corona.

Peres, G.↗

Closed coronal structures. III - Comparison of static models with X-ray, EUV, and radio observations

Numerical models of static coronal loops in energy balance are compared with high spatial resolution observations of extreme ultraviolet lines, broad-band X-ray emission, and interferometric observations at 2.8 cm of a solar active region. Difficulties of using scaling laws to test static models of coronal loops are reviewed. The theoretical model used for the comparison is summarized; the detailed X-ray, EUV, and microwave observations of the selected active region are presented; and the comparison of the model with the observations is performed. It is shown that simple static models with conductive flux vanishing at the loop base reproduce satisfactorily the observed properties in the upper portion of loop structures from compact, high-pressure loops in the core of the region to more extended, fainter loops and to large-scale loops interconnecting different active regions. Effects of changing loop parameters are investigated, and it is argued, that in contrast to the present approach, scaling laws cannot be used to discriminate between different static energy balance models. Some discrepancy is found between model predictions and observations for the lower sections of loop structures. Possible causes of the discrepancy are discussed.

Pallavicini, R.↗

Closed coronal structures. II - Generalized hydrostatic model

Numerical computations of stationary solar coronal loop atmospheres are used to extend earlier analytical work. Two classes of loops are examined, namely symmetric loops with a temperature maximum at the top but now having a length greater than the pressure scale height and loops which have a local temperature minimum at the top. For the first class, new scaling laws are found which relate the base pressure and loop length to the base heating, the heating deposition scale height, and the pressure scale height. It is found that loops for which the length is greater than about two to three times the pressure scale height do not have stable solutions unless they have a temperature minimum at the top. Computed models with a temperature inversion at the top are permitted in a wider range of heating deposition scale height values than are loops with a temperature maximum at the top. These results are discussed in relation to observations showing a dependence of prominence formation and stability on the state of evolution of magnetic structures, and a general scenario is suggested for the understanding of loop evolution from emergence in active regions through the large-scale structure phase to opening in coronal holes.

Serio, S.↗