Engineering topics

Peraire, J.

Publications and source records attributed to Peraire, J..

31 records · Page 2

NASA NTRS1990

An implicit finite element method for high speed flows

A fast algorithm is presented for constructing continuous lines, consisting of element sides, on general unstructured two-dimensional triangular meshes. The lines must pass through each node of the mesh once and only once. The discussion focuses on the use of these lines in a relaxation method for the solution of the equation system arising from an implicit algorithm for the solution of two-dimensional Euler and Navier-Stokes equations on general unstructured grids. It is also shown that the method can be used for solving three-dimensional Navier-Stokes equations on a grid composed of both structured and unstructured regions.

Hassan, O.↗

NASA NTRS1989

An adaptive implicit/explicit finite element scheme for compressible viscous high speed flow

An adaptive implicit/explicit finite element procedure for the solution of three-dimensional problems of steady compressible viscous high-speed flows is presented. In the vicinity of solid walls, a grid-exhibiting structure in the normal direction is employed, while away from this region the grid is totally unstructured. The implicit form of the algorithm is used near solid walls, with the grid structure being utilized in an equation solution approach based upon line relaxation. The explicit form of the algorithm is used elsewhere. Grid adaptation is achieved by means of adaptive remeshing. To illustrate the performance of the proposed method, solutions are obtained for the problems of shock-boundary layer interaction and shock-shock interaction on a swept cylindrical leading edge. Comparisons are made with experimental observations.

Hassan, O.↗

NASA NTRS1989

Adaptive numerical solutions of the Euler equations in 3D using finite elements

The development of an adaptive mesh solution for a flow involving shock interaction on a swept cylinder and an initial solution for a flow past a complex fighter configuration is reported. The finite element solution algorithm, the mesh generation, and the adaptivity of the solution are described. Sample results for the flow past an F-18 configuration at Mach 0.9 and alpha of 3 deg and for shock interaction on a swept cylinder at Mach 8.04 are summarized.

Peraire, J.↗

NASA NTRS1989

The simulation of 2D compressible viscous high speed flow by the finite element method

Am implicit/explicit procedure for the solution of problems of two-dimensional steady compressible viscous high-speed flows is presented. In the vicinity of solid walls, a grid which need only exhibit structure in the normal direction is employed while, away from this region, the grid is totally unstructured. The implicit form of the algorithm is used near solid walls, with the grid structure being utilized in an equation solution approach, based upon line relaxation. The explicit form of the algorithm is used elsewhere. Grid adaptation is achieved by means of adaptive remeshing. To illustrate the performance of the proposed method, problems of shock-boundary layer interaction and flow over a simulated forebody at high Mach number are included.

Hassan, O.↗

NASA NTRS1988

Finite element solution of the Euler equations in two and three dimensions

The paper presents a finite element procedure for solving the equations of compressible flow over bodies of arbitrary geometry. The numerical solution algorithm employed is an explicit two-step version of a second order Taylor-Galerkin scheme. The discretization of the computational domain into unstructured meshes of triangles in two dimensions and tetrahedra in three dimensions is performed by an automatic mesh generator. In the approach, the mesh generator is coupled to the finite element solver to produce an adaptive remeshing procedure.

Peiro, J.↗

NASA NTRS1987

Adaptive remeshing for compressible flow computations

The present, quality-enhancing adaptive-mesh procedure for two-dimensional Euler equation steady state solutions is implemented by means of linear triangular elements and an explicit time-stepping scheme, in conjunction with a finite element solution algorithm. The meshes thus generated typically take the form of stretched elements in the vicinity of one-dimensional flow features; a considerable variation in element size may thereby emerge which allows the desired high-quality solutions to be obtained with commensurately high computational efficiency.

Peraire, J.↗

NASA NTRS1987

Finite element methods for compressible flows

The problems of mesh generation and developing effective algorithms for the solution of the equations of compressible flow on unstructured meshes are discussed. Adaptive mesh refinement methods can be implemented in a straightforward manner. Possible adaptive strategies are examined. A finite element method adapted to problems involving high speed compressible flow is described. The adaptive mesh regeneration procedure appears to offer the possibility of large computational savings in three dimensional flow computation.

Morgan, K.↗

NASA NTRS1987

An adaptive finite element method for high speed flows

The solution of the equations of compressible high speed flow, on unstructured triangular grids in 2D and tetrahedral grids in 3D, is considered. Solution methods based upon both Taylor-Galerkin and Runge-Kutta time-stepping techniques are presented and the incorporation of the ideas of flux corrected transport (FCT) is discussed. These methods are combined with an adaptive mesh regeneration procedure and are employed in the solution of several examples, consisting of Euler flows in both 2D and 3D and Navier-Stokes flows in 2D.

Peraire, J.↗

NASA NTRS1987

An adaptive finite element scheme for the Euler and Navier-Stokes equations

The implementation of two explicit finite element schemes for the solution of the compressible Euler and Navier-Stokes equations is presented. The schemes can be employed with general unstructured triangular meshes in two dimensions. Either scheme can therefore be used as the basic solver in a solution adaptive mesh procedure in a direct manner. The particular adaptive approach which is advocated here is intended for the solution of steady state problems only and involves an adaptive regeneration of the grid at prescribed stages during the false transient. The grid regeneration is accomplished by a mesh generator which has the capability of generating triangular grids over computational domains of arbitrary shape. The procedure is illustrated by solving transonic flows over multi-airfoil configurations and high speed flows, involving shock interactions, past circular cylinders.

Morgan, K.↗

NASA NTRS1986

Convection dominated problems

The paper surveys the last ten years of activity of the INME Swansea, dealing with problems of convection dominated flow. The basic explicit/implicit characteristic Galerkin process and its application to adaptive mesh refinement used in the solution of realistic problems is focused on.

Peraire, J.↗

NASA NTRS1985

Finite element methods for high speed flows

An explicit finite element based solution procedure for solving the equations of compressible viscous high speed flow is presented. The method uses domain splitting to advance the solution with different timesteps on different portions of the mesh. For steady inviscid flows, adaptive mesh refinement procedures are successfully employed to enhance the definition of discontinuities. Preliminary ideas on the application of adaptive mesh refinement to the solution of problems involving steady viscous flow are presented. Sample timings are given for the performance of the finite element code on modern supercomputers.

Loehner, R.↗

NASA NTRS1985

High-speed compressible flow and other advection-dominated problems of fluid dynamics

Finite element methods are described for modeling high speed compressible flows with strong advection, problems important to aerodynamics. The situations are characterized by high pressure and temperature gradients, transients and the appearance of discontinuities, factors which require mesh refinement during computations. Techniques are developed for temporal and spatial discretization of a model problem. Several observations are made regarding the explicit and implicit features of the calculations, the use of the Lax-Wendroff scheme to produce a mass-matrix for obtaining accurate results for transients, methods of performing stability analyses, and simplification techniques. Examples are provided of solving the nonlinear shallow-water equations and describing compressible flows, particularly transonic flows. Domain splitting is defined for improving the calculations at each time step and in different parts of the flow regime while simultaneously advancing the calculations towards a solution.

Zienkiewicz, O. C.↗

NASA NTRS1985

Recent developments in FEM-CFD

The current status of CFD with regard to unstructured grids employing finite element methods and Eulerian frames is reviewed. Algorithms suitable for the computation of large three-dimensional problems involving flow past arbitrary geometries are developed. Adaptive mesh refinement strategy is reviewed, and domain splitting or local time-stepping are briefly addressed. The development of search algorithms of optimal order, variable time-stepping Jacobi smoothers for elliptic problems, and transport concepts for hyperbolics to help achieve good performance for unstructured multigrid processes is discussed. As examples, transient supersonic flow in a channel, regular shock reflection of a wall, viscous flow past a protruberance, potential flow past a cylinder, and Burgers equation are considered.

Loehner, R.↗