Engineering Papers⌕ Search

Engineering topics

Peng, Haowei

Publications and source records attributed to Peng, Haowei.

At least 19 records

Reimagining the $e_g$ 1 Electronic State in Oxygen Evolution Catalysis: Oxidation-State-Modulated Superlattices as a New Type of Heterostructure for Maximizing Catalysis

We report that the discovery of solid-phase, inexpensive transition-metal-based water oxidation catalysts is a central goal for renewable energy, and has led to a general consensus that a partially populated metal e g d-electronic state is desirable, leading to favorable catalysis for certain elements in specific oxidation states. In manganese systems, the key species is manganese(III), whose high-spin d 4 electronic configuration places an unpaired electron in the e g orbital, which is postulated to contribute to electronic and structural features that support catalysis. Based on density functional theory calculations, it is predicted that electron transfer would be facilitated by a catalyst with alternating low- and high-Mn III -content sheets, which positions neighboring band edges in closer energetic proximity. The preparation of such catalysts is demonstrated for the first time and it is shown that the catalytic activity is maximized in these systems over more uniform, but more Mn III -rich systems. The best catalyst possesses alternating high-and low-average oxidation state sheets with interlayer Cs + ions, and has an overpotential of 450 mV at 10 mA, which represents an improvement of 250 mV over the best unmodified synthetic potassium birnessites. Using scanning tunneling spectroscopy, bandgap modulations consistent with the theoretically predicted band edge shifts are detected.

36 MATERIALS SCIENCE↗

Different bonding type along each crystallographic axis: Computational study of poly($\textit{p}$-phenylene terephthalamide)

Poly($\textit{p}$-phenylene terephthalamide) (PPTA) exhibits van der Waals (vdW) bonding along its $\textit{a}$ axis, hydrogen bonding along its $\textit{b}$ axis, and covalent bonding along its $\textit{c}$ axis. In this work, we explore the structural and mechanical properties of PPTA using density functional theory with various functionals including LDA, PBE, PBE+rVV10L, SCAN, and SCAN+rVV10, compared with available experiments. The hierarchy of nonempirical semilocal functionals LDA, PBE, and SCAN (not fitted to any multicenter bonded system) includes differing amounts of intermediate-range vdW interaction. rVV10 is the long-range vdW correction. (rVV10L differs from rVV10 only in the value of a range parameter.) Among the tested functionals, SCAN shows the best performance for the lattice parameters of PPTA along the two crystal directions involving vdW or hydrogen-bond interaction. The equilibrium lattice constants obtained by SCAN and PBE+rVV10L are closest to experimental data, while SCAN+rVV10 slightly overbinds the system. We study the mechanical response of PPTA by applying strain along three lattice directions. Due to the inclusion of vdW interaction, SCAN, PBE+rVV10L, and SCAN+rVV10 all exhibit correct bonding strain-energy curves. On the contrary, PBE strongly underestimates the vdW interaction needed to resist uniaxial stretching along the $\textit{a}$ axis. The Young's modulus and yield strength of PPTA are computed and compared with previous results. The experimental values are much smaller than the computed ones, mainly due to the fact that the PPTA fiber samples used for measurements are mechanically weaker than the perfect molecular crystals considered in the simulations. Interestingly, when a compressive uniaxial stress of 25 Kbar is applied along the $\textit{b}$ axis, a structural phase transition, in which the hydrogen bonds reform along one diagonal of the $\textit{ab}$ rectangle, is predicted by SCAN.

36 MATERIALS SCIENCE↗

Predictive design of intrinsic half-metallicity in zigzag tungsten dichalcogenide nanoribbons

Realization of half-metallicity with a sizable minority-spin gap and ferromagnetic ordering has been a central research emphasis in the development of next-generation spintronic devices. To date, only three-dimensional half-metals have been achieved experimentally, while their counterparts based on two-dimensional (2D) materials remain to be materialized despite extensive efforts based on various predictive designs. This standing challenge is largely due to stringent requirements to establish ferromagnetic order in low-dimensional systems. In this work, we use first-principles approaches to show that atomically thin zigzag tungsten dichalcogenide WX 2 (X = S, Se) nanoribbons preserving the stoichiometry of W : X = 1 : 2 stand as highly appealing intrinsic half-metallic systems, without invoking the prevailing approaches of applying an external electric field, chemical modification, or carrier doping. The readily accessible half-metallicity is attributed to distinctly different edge reconstructions, insulating along the X-terminated edges and metallic along the self-passivated W-terminated edges; the latter are further characterized by a robust spin-polarized electron transmission channel. These findings are expected to provide indispensable elemental building blocks for spintronic applications purely based on 2D materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Anisotropic Conductivity at the Single‐Molecule Scale

Abstract In most junctions built by wiring a single molecule between two electrodes, the electrons flow along only one axis: between the two anchoring groups. However, molecules can be anisotropic, and an orientation‐dependent conductance is expected. Here, we fabricated single‐molecule junctions by using the electrode potential to control the molecular orientation and access individual elements of the conductivity tensor. We measured the conductance in two directions, along the molecular plane as the benzene ring bridges two electrodes using anchoring groups (upright) and orthogonal to the molecular plane with the molecule lying flat on the substrate (planar). The perpendicular (planar) conductance is about 400 times higher than that along the molecular plane (upright). This offers a new method for designing a reversible room‐temperature single‐molecule electromechanical switch that controllably employs the electrode potential to orient the molecule in the junction in either “ON” or “OFF” conductance states.

Afsari, Sepideh↗

Rethinking CO adsorption on transition-metal surfaces: Effect of density-driven self-interaction errors

Adsorption of the molecule CO on metallic surfaces is an important unsolved problem in Kohn-Sham density functional theory (KS-DFT). We present a detailed study of carbon monoxide adsorption on fcc (111) surfaces of 3d, 4d, and 5d metals using nonempirical semilocal density functionals for the exchange-correlation energy: the local-density approximation (LDA), two generalized gradient approximations or GGAs [Perdew-Burke-Ernzerhof (PBE) and PBE for solids (PBEsol)], and a meta-GGA [strongly constrained and appropriately normed (SCAN) functional]. The typical error pattern (as found earlier for free molecules and for free transition-metal surfaces), in which results improve from LDA to PBE or PBEsol to SCAN, due to the satisfaction of more exact constraints, is not found here. Instead, for CO adsorption on transition-metal surfaces, we find that, while SCAN overbinds much less than LDA, it overbinds slightly more than PBE. Moreover, the tested functionals often predict the wrong adsorption site, as first pointed out for LDA and GGA in the CO/Pt (111) puzzle. This abnormal pattern leads us to suspect that the errors of PBE and SCAN for this problem are density-driven self-interaction errors associated with incorrect charge transfer between molecule and metal surface. We point out that, by the variational principle, overbinding by an approximate functional would be reduced if that functional were applied not to its self-consistent density for the adsorbed system but to an exact or more correct density for that system. Finally, we show for CO on Pt(111) that the site preference is corrected and the adsorption energy is improved for the PBE functional by using not the self-consistent PBE density but a PBE+U density. The resulting correction to the PBE total energy is much larger for the adsorbed system than for its desorbed components, showing that the error is in the density of the adsorbed system. Furthermore, this seems to solve the Feibelman 2001 CO/Pt(111) puzzle, in principle if not fully in practice.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Anisotropic Conductivity at the Single-Molecule Scale

In most junctions built by wiring a single molecule between two electrodes, the electrons flow along only one axis: between the two anchoring groups. However, molecules can be anisotropic, and an orientation-dependent conductance is expected. Here, we fabricated single-molecule junctions by using the electrode potential to control the molecular orientation and access individual elements of the conductivity tensor. We measured the conductance in two directions, along the molecular plane as the benzene ring bridges two electrodes using anchoring groups (upright) and orthogonal to the molecular plane with the molecule lying flat on the substrate (planar). The perpendicular (planar) conductance is about 400 times higher than that along the molecular plane (upright). Overall, this offers a new method for designing a reversible room-temperature single-molecule electromechanical switch that controllably employs the electrode potential to orient the molecule in the junction in either “ON” or “OFF” conductance states.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Efficient first-principles prediction of solid stability: Towards chemical accuracy

The question of material stability is of fundamental importance to any analysis of system properties in condensed matter physics and materials science. The ability to evaluate chemical stability, i.e., whether a stoichiometry will persist in some chemical environment, and structure selection, i.e. what crystal structure a stoichiometry will adopt, is critical to the prediction of materials synthesis, reactivity and properties. In this paper, we demonstrate that density functional theory, with the recently developed strongly constrained and appropriately normed (SCAN) functional, has advanced to a point where both facets of the stability problem can be reliably and efficiently predicted for main group compounds, while transition metal compounds are improved but remain a challenge. SCAN therefore offers a robust model for a significant portion of the periodic table, presenting an opportunity for the development of novel materials and the study of fine phase transformations even in largely unexplored systems with little to no experimental data.

36 MATERIALS SCIENCE↗

Systematic Doping of Cobalt into Layered Manganese Oxide Sheets Substantially Enhances Water Oxidation Catalysis

The effect on the electrocatalytic oxygen evolution reaction (OER) of cobalt incorporation into the metal oxide sheets of the layered manganese oxide birnessite was investigated. Birnessite and cobalt-doped birnessite were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, and conductivity measurements. A cobalt:manganese ratio of 1:2 ended in the most active catalyst for the OER. Specifically, the overpotential (η) for the OER was 420 mV, significantly lower than the η = 780 mV associated with birnessite in the absence of Co. Moreover, the Tafel slope for Co/birnessite was 81 mV/dec, in comparison to a Tafel slope of greater than 200 mV/dec for birnessite. For chemical water oxidation catalysis, an 8-fold turnover number (TON) was achieved (h = 70 mmol of O 2 /mol of metal). Density functional theory (DFT) calculations predict that cobalt modification of birnessite resulted in a raising of the valence band edge and occupation of that edge by holes with enhanced mobility during catalysis. Inclusion of extra cobalt beyond the ideal 1:2 ratio was detrimental to catalysis due to disruption of the layered structure of the birnessite phase.

36 MATERIALS SCIENCE↗

Characterization of defects in copper antimony disulfide

Copper antimony disulfide (CuSbS 2 ) has several excellent bulk optoelectronic properties for photovoltaic absorber applications. Here, we report on the defect properties in CuSbS 2 thin film materials and photovoltaic devices studied using several experimental methods supported by theoretical calculations.

14 SOLAR ENERGY↗

Synergy of van der Waals and self-interaction corrections in transition metal monoxides

Density functional theory in principle predicts correct ground-state properties for all materials. However, the rocksalt structure of MnO has been obtained only by the high-level random phase approximation and diffusion Monte Carlo (DMC). In this work, we propose and test for MnO, FeO, CoO, and NiO that a semilocal density functional can solve this problem by properly including both self-interaction and van der Waals corrections. The importance of the latter was previously unanticipated. The MnO structural energy difference from SCAN+rVV10+U agrees well with that from DMC. Here SCAN is a recent semilocal exchange-correlation functional, rVV10 is the revised Vydrov-VanVoorhis long-range van der Waals correction, and the onsite Hubbard U is taken from linear response.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Redox properties of birnessite from a defect perspective

Significance We propose, and preliminarily confirm with experiments, a theoretical model to understand various structure–performance dependences of layered-structure birnessite as an oxygen evolution reaction (OER) catalyst. Besides the well-accepted importance of Mn(III), we emphasize the critical importance of a nonuniform distribution of Mn(III) to OER catalytic activity. Such a distribution contributes to the reduction of the overpotential by building an internal potential step. We further propose the small polaron as a common concept to link the fields of oxygen evolution catalysis and Li-ion batteries, suggesting a promising candidate space for oxygen evolution reaction catalysts.

36 MATERIALS SCIENCE↗

DEPRECATED LaDa™ [SWR-12-10]

DEPRECATED This repository was archived by the owner on Apr 24, 2023. It is now read-only.High-Throughput software platform to create/launch/analyze physics-related calculations. The front-end is a python API which allows the user to create any conceivable first-principles physics calculation. Is is coupled to an ipython interface to launch and retrieve large number of calculations. It was successfully used in high-throughput calculations of point defect formation enthalpies, compound formation enthalpies, and a genetic algorithm search of direct-gap silicon/germanium structures.

d'Avezac, Mayeul↗

Novel phase diagram behavior and materials design in heterostructural semiconductor alloys

Structure and composition control the behavior of materials. Isostructural alloying is historically an extremely successful approach for tuning materials properties, but it is often limited by binodal and spinodal decomposition, which correspond to the thermodynamic solubility limit and the stability against composition fluctuations, respectively. We show that heterostructural alloys can exhibit a markedly increased range of metastable alloy compositions between the binodal and spinodal lines, thereby opening up a vast phase space for novel homogeneous single-phase alloys. We distinguish two types of heterostructural alloys, that is, those between commensurate and incommensurate phases. Because of the structural transition around the critical composition, the properties change in a highly nonlinear or even discontinuous fashion, providing a mechanism for materials design that does not exist in conventional isostructural alloys. The novel phase diagram behavior follows from standard alloy models using mixing enthalpies from first-principles calculations. Furthermore, thin-film deposition demonstrates the viability of the synthesis of these metastable single-phase domains and validates the computationally predicted phase separation mechanism above the upper temperature bound of the nonequilibrium single-phase region.

14 SOLAR ENERGY↗

Understanding band gaps of solids in generalized Kohn–Sham theory

The fundamental energy gap of a periodic solid distinguishes insulators from metals and characterizes low-energy single-electron excitations. However, the gap in the band structure of the exact multiplicative Kohn–Sham (KS) potential substantially underestimates the fundamental gap, a major limitation of KS density-functional theory. Here, we give a simple proof of a theorem: In generalized KS theory (GKS), the band gap of an extended system equals the fundamental gap for the approximate functional if the GKS potential operator is continuous and the density change is delocalized when an electron or hole is added. Our theorem explains how GKS band gaps from metageneralized gradient approximations (meta-GGAs) and hybrid functionals can be more realistic than those from GGAs or even from the exact KS potential. The theorem also follows from earlier work. The band edges in the GKS one-electron spectrum are also related to measurable energies. Finally, a linear chain of hydrogen molecules, solid aluminum arsenide, and solid argon provide numerical illustrations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Rehabilitation of the Perdew-Burke-Ernzerhof generalized gradient approximation for layered materials

The structural and energetic properties of layered materials present a challenge to density functional theory with common semilocal approximations to the exchange-correlation energy. By combining the most widely used semilocal generalized gradient approximation (GGA), the Perdew-Burke-Ernzerhof (PBE) one, with the revised Vydrov–van Voorhis nonlocal correlation functional (rVV10), both excellent structural and energetic properties of 28 layered materials have been recovered with a judicious parameter selection. We term the resulting functional PBE+rVV10L, with the “L” indicating that it is for layered materials. Such a combination is not new, and only involves refitting a single global parameter. However, the resulting high accuracy suggests such a dispersion-corrected PBE for many aspects of theoretical studies on layered materials. For comparison, we also present the results for PBE+rVV10 where the parameter is determined by 22 interaction energies between molecules.

36 MATERIALS SCIENCE↗