Engineering topics

Pawlik, E. V.

Publications and source records attributed to Pawlik, E. V..

At least 19 records

NASA NTRS1986

Improvements in Ionized Cluster-Beam Deposition

Lower temperatures result in higher purity and fewer equipment problems. In cluster-beam deposition, clusters of atoms formed by adiabatic expansion nozzle and with proper nozzle design, expanding vapor cools sufficiently to become supersaturated and form clusters of material deposited. Clusters are ionized and accelerated in electric field and then impacted on substrate where films form. Improved cluster-beam technique useful for deposition of refractory metals.

Fitzgerald, D. J.↗

NASA NTRS1986

Spacecraft technology requirements for future NASA missions

Missions selected by NASA as representative of the most critical technology issues are described and the key technology requirements are discussed. The following are considered: (1) the Large Deployable Reflector (LDR), (2) the Sample Return Missions (SRM), (3) the Earth Observing System (EOS), and (4) the Geostationary Communications Platform (GCP). The LDR, designed for infrared and submillimeter astronomical measurements, will contain the following components for its instruments: indium antimonide charge-coupled arrays, extrinsic photodetector arrays, and heterodyne photoconductors. New technology developed for SRM includes an X-band transponder, a fiber-optic rotation sensor, and long-life batteries. The EOS will consist of instruments designed to measure the earth's atmosphere, interior, and surface, as well as an information system to support scientific research. Inherent in the platform of the GCP is the ability to effectively utilize both the geostationary arc and the electromagnetic spectrum; the GCP can also reduce overall satellite communications system costs.

Hudson, W. R.↗

NASA NTRS1982

Magnetoplasmadynamic thruster development

Current research on self-field MPD thrusters presents the possibility of developing high power/low cost electric propulsion. The interest generated in this propulsion concept within both NASA and the U.S. Air Force has led to a coordinated interagency effort, and the recent completion of several test sites are expected to speed thruster concept development. Efficiencies approaching 40% at 2200 sec have been experimentally demonstrated. Among the characteristics recommending development of MPD thrusters are high thrust density and power handling capability, simplicity, and a wide dynamic range of thrust and specific impulse. MPD thrusters can, moreover, operate either continuously, at high available power levels, or in a pulsed mode, to match lower power levels.

Pawlik, E. V.↗

NASA NTRS1981

Sandblasting nozzle

A nozzle for use with abrasive and/or corrosive materials is formed of sintered ceramic compositions having high temperature oxidation resistance, high hardness and high abrasion and corrosion resistance. The ceramic may be a binary solid solution of a ceramic oxide and silicon nitride, and preferably a ternary solid solution of a ceramic oxide, silicon nitride and aluminum nitride. The ceramic oxide is selected from a group consisting of Al2O3, Y2O3 and Cr2O3, or mixtures of those compounds. Titanium carbide particles are dispersed in the ceramic mixture before sintering. The nozzles are encased for protection from external forces while in use by a metal or plastic casing.

Perkins, G. S.↗

NASA NTRS1981

Interactions between a spacecraft and an ion thruster produced environment

The electron bombardment ion thruster is a candidate propulsion device for several proposed interplanetary missions. A comet rendezvous mission is expected to be the first use of a Solar Electric Propulsion System (SEPS). Because this is the first use of such a system, it is necessary to understand the interactions between the spacecraft and the environment produced by the SEPS. A preliminary assessment of the interactions between a thruster produced environment and the Comet Rendezvous spacecraft, including its science instruments, is presented which concludes that compatibility between the SEPS and the spacecraft can be obtained.

Carruth, M. R., Jr.↗

NASA NTRS1979

Interactions between a spacecraft and an ion thruster produced environment

A model of the charge-exchange plasma flow around a spacecraft is used to determine charge-exchange plasma densities and arrival rates at various locations on the spacecraft. A general assessment of particle deposition and effects of such are presented as they relate to the spacecraft and particular science instruments. Various aspects of the interactions between the ion thruster produced environment and a Comet Rendezvous (CR) spacecraft are addressed. No instruments will be affected adversely when the thrusters are off, excluding those that have passive radiators which may collect mercury.

Carruth, M. R., Jr.↗

NASA NTRS1979

The MPD thruster development program

Recent research results have inferred that the self-field magnetoplasmadynamic (MPD) thruster can attain efficiency and specific impulse levels which are competitive with ion thrusters. Based on these results, a program was initiated at JPL to develop this thruster for application on future spacecraft. Preliminary mission analyses have shown that the high thrust density MPD arcjet is advantageous for high power missions, such as a short trip time earth orbit transfer vehicle or a nuclear powered outer planet explorer. Direct thrust stand verification of the inferred performance levels used in these analyses is planned for a facility being assembled at Princeton University. A parallel effort at JPL is considering various thruster system configurations, energy storage concepts and propellant control techniques. In addition, a one pulse per second thruster test facility is planned at JPL to be used for thruster optimization studies including erosion and lifetime measurements.

Rudolph, L. K.↗

NASA NTRS1978

Design consideration for a nuclear electric propulsion system

A study is currently underway to design a nuclear electric propulsion vehicle capable of performing detailed exploration of the outer-planets. Primary emphasis is on the power subsystem. Secondary emphasis includes integration into a spacecraft, and integration with the thrust subsystem and science package or payload. The results of several design iterations indicate an all-heat-pipe system offers greater reliability, elimination of many technology development areas and a specific weight of under 20 kg/kWe at the 400 kWe power level. The system is compatible with a single Shuttle launch and provides greater safety than could be obtained with designs using pumped liquid metal cooling. Two configurations, one with the reactor and power conversion forward on the spacecraft with the ion engines aft and the other with reactor, power conversion and ion engines aft were selected as dual baseline designs based on minimum weight, minimum required technology development and maximum growth potential and flexibility.

Phillips, W. M.↗

NASA NTRS1978

Ion Propulsion Module design and mission performance

This paper describes the design options, processes and tradeoffs that occur during the establishment of viable Ion Drive vehicle and mission designs. The options identify those internal vehicle design alternatives which are being considered for future Ion Drive missions, such as sunlight concentrating arrays and direct drive thrust subsystems, and their effect on mission performance. Also, the highly interactive nature of the Ion Drive design process, which occurs between the spacecraft and mission designers, is described. The results of design tradeoffs, performed for three Ion Drive comet rendezvous missions, are presented. These results include the following: (1) the power profile is determined primarily by the trajectory while second order effects include the solar cell characteristics and array concentration factor and degradation; and (2) the dominant parameter in mission performance determination, Ion Propulsion Module (IPM) mass, and IPM design, is the total cell power evaluated without concentration, at the beginning of life and at 1 AU.

Graf, J. E.↗

NASA NTRS1977

Heavy-duty sandblast nozzle

Inexpensive sialon (silicon/aluminum/oxygen/nitrogen) nozzle liner resists abrasion and is strong at high temperatures.

Pawlik, E. V.↗

NASA NTRS1977

Digital simulation of a 30-cm diameter ion thruster control system

A hybrid model of a 30-cm diameter ion thruster and transistorized power processor was formulated and implemented on a digital computer. The control loops as presented are stable for normal values of loop gain when propellant line delay times are zero. Small oscillations are present in the loops when representative thruster delay times are included in the model. Discharge supply characteristics can affect the control loop oscillations. Recovery from runaway can be aggravated by delay time and, to a greater extent, by discharge supply characteristics.

Kudo, I.↗

NASA NTRS1976

A nuclear electric propulsion vehicle for planetary exploration

A study is currently underway at JPL to design a nuclear electric-propulsion vehicle capable of performing detailed exploration of the outer planets. Evaluation of the design indicates that it is also applicable to orbit raising. Primary emphasis is on the power subsystem. Work on the design of the power system, the mission rationale, and preliminary spacecraft design are summarized. A propulsion system at a 400-kWe power level with a specific weight goal of no more than 25-kg/kW was selected for this study. The results indicate that this goal can be realized along with compatibility with the shuttle launch-vehicle constraints.

Pawlik, E. V.↗

NASA NTRS1976

Magnetoplasmadynamic thruster applications

Advance study activities within NASA indicate that electric propulsion will be required to make certain types of potential missions feasible. The large power levels under consideration make magnetoplasmadynamic thrusters a good candidate for these applications since this type of electric thruster is best suited to operation at high power levels. This paper examines the status of the magnetoplasmadynamic thruster and compares it to the ion thruster which also is a candidate. The use of these two types of electric propulsion devices for orbit raising of a self-powered large satellite is examined from a cost standpoint. In addition the use of nuclear electric propulsion is described for use as both a near-earth space tug and for an interplanetary exploration vehicle. These preliminary examinations indicate that the magnetoplasmadynamic thruster is the lowest cost thruster and therefore merits serious consideration for these applications.

Pawlik, E. V.↗

NASA NTRS1976

Simulation of an ion thruster control system

The results of an initial effort to model the control loops of a 30-cm diameter electron bombardment thruster and a transistorized power processor predicting its operation were described. Data from which the model is made is presented as well as comparisons between the computer outputs and test data from the JPL Solar Electric Propulsion systems laboratory.

Kudo, I.↗

NASA NTRS1976

Inductively coupled TI-MPD spacecraft electric propulsion

A nuclear electric propulsion concept using a thermionic reactor inductively coupled to a magnetoplasma-dynamic (MPD) accelerator is described and the results of preliminary analyses are presented. In this system, the thermionic generating unit operates continuously at a power level of approximately 0.4 MW, while the MPD thruster operates intermittently at higher voltages and power levels. Energy storage is provided by building up a large current in an inductor. Periodically, the charging current is interrupted and the energy stored in the magnetic field of the inductor is utilized for a short duration thrust pulse. A typical thrust pulse is characterized by a power level of 1 to 4 MWe, a duration of 1 msec, and a duty cycle of approximately 20%. Results of the preliminary analysis show that approximately 85 to 90% of the power available from the thermionic converter array can be delivered to the MPD thruster for a nominal 400 kWe system with an inductive unit suitable for a flight vehicle. Optimized values of the total specific mass of the system including the thermionic reactor, the inductor, and the MPD thruster are estimated in the range of 23 to 24 kg/kWe.

Britt, E. J.↗

NASA NTRS1973

Ion thruster with a combination keeper electrode and electron baffle

An ion thruster is described in which the cathode front end, surrounded by our insulator, is mounted flush with the front end of the flanged portion of the cathode pole piece. The thruster's baffle positioned in front of the cathode's front end supports the thruster's keeper electrode which is space apart and directed to the cathode's open end. The baffle is at the keeper's electrode potential.

Pawlik, E. V.↗

NASA NTRS1973

Ion thruster thermal characteristics and performance.

Experimental and analytical results for a typical 20-cm-diam, hollow-cathode ion thrustor are reported. The foundation of the investigation was the application of thermal model correction techniques. Pertinent thermal properties and plasma heating characteristics of the thrustor were determined through correlation and integration of temperature measurement data with a single-state Wiener-Kalman filter. The thrustor self-heating levels on various parts were realistically estimated. Analytically predicted temperatures were forced to agree with the measured values for the purpose of constructing a corrected thermal model, which could then be used to evaluate more realistic thrustor circumstances and environments. The expected accuracy of the resultant analytical network model was demonstrated to be plus or minus 10 K. Thrustor thermal performance data for a typical five-thrustor array are presented as functions of environmental solar intensities. The thermal analyses are also extended to a 30-cm thrustor system.

Wen, L.↗

NASA NTRS1972

Ion thruster performance calibration.

The calibration of a typical 20-cm diameter ion thrustor was examined to determine performance penalties that must be assessed in projecting measured performance into a space environment. Four specific areas were investigated. These include (1) double ion content of the beam, (2) back ingestion from the vacuum facility, (3) beam spreading, and (4) propellant flow rate measurements. The double ion content was measured and found to be as high as 5.5% at an arc voltage of 35 volts. Back ingestion was observed to become significant above tank pressures of 6 microtorr. Beam spreading reduced effective thrust on the order of 2.5%.

Pawlik, E. V.↗