Engineering topics

Paul McKee

Publications and source records attributed to Paul McKee.

3 records

NASA NTRSDate not supplied

Monocular Horizon Navigation

The Artemis program advances towards operations on the lunar surface, where precise surface localization is a driving need for safety and science. Using the observable horizon as an image landmark allows for estimating the photographer’s position. This work analyzes the application of Perspective-n-Point (PnP) algorithms to this lunar localization problem. Batch simulations using lunar topography display the accuracy and drawbacks of these methods. Monte Carlo techniques show the pipeline’s solutions as measurements provided to a navigation filter. When filtered, these solutions have position errors of 50 meters or better, which is similar to or better than the performance of other methods of surface localization.

optical navigation↗

NASA NTRSDate not supplied

Camera Calibration and Alignment Metrology at Johnson Space Center’s Electro-Optics Laboratory

It is increasingly common to see spacecraft equipped with cameras for the purpose of navigation. Images are either sent to Earth or processed autonomously on-board to provide information about the vehicle’s position, velocity, and/or attitude. These can be images of stars or celestial bodies for absolute navigation, or images of another spacecraft for relative navigation. While monocular cameras do not provide range information, the images they capture can be processed to determine bearing vectors to target objects within the camera’s field of view. For a camera to be effective in navigation, it must be carefully calibrated and aligned. This involves accurately modeling the optical effects that govern the projection of line-of-sight directions onto the camera’s pixels and determining the camera’s orientation relative to the spacecraft’s reference frame. Engineers at Johnson Space Center’s Electro-Optics Lab regularly perform camera inspection, calibration, and alignment metrology. This was done for the Orion Optical Navigation (OpNav) Camera, the Orion Docking Camera (DCAM), and for numerous cameras belonging to commercial partners. The nature of optical navigation means that cameras must be well-calibrated and their attitude well understood to provide high accuracy bearing measurements to the navigation filter. The stringent accuracy requirements for Orion could not have been met using traditional checkerboard camera calibration or by simply relying on design drawings. This paper details the hardware, software, techniques, and algorithms used by the EOL team to achieve this level of accuracy.

Paul McKee↗

NASA NTRSDate not supplied

A Survey of Autonomous Navigation Techniques Applicable to Lunar Surface Exploration

As humanity returns to the Moon, and more and more attention is being paid to lunar surface operations, there is a greater need than ever for methods of surface navigation. These could be methods of computer-assisted orienteering for astronauts exploring on foot during an Extra-Vehicular Activity (EVA), or methods of solving the Lost-on-the-Moon problem to initialize a crewed or autonomous rover’s state estimate. It may also be necessary to process navigation data associated with surface samples or other surface operations a posteriori to better understand where that analysis occurred. Autonomous rover operation will also require Hazard Detection and Avoidance (HDA) and terrain-aware pathfinding. While navigation on the surface of the Moon will likely rely on Earth-based assets such as the Deep Space Network (DSN) or communication with other spacecraft (e.g., LunaNet, LCRNS, pre-deployed moon beacons, a nearby lander) it may be necessary to navigate in a loss-of-communication scenario. This paper analyzes the methods of surface navigation used on other celestial bodies, such as those used during the Apollo missions and autonomous exploration of Mars, as well as novel methods which have been studied but not yet implemented which may prove useful. It is shown that the navigator has myriad options when processing data from an Inertial Measurement Unit (IMU), a star tracker, (rover) wheel encoders, optical cameras, and LIght Detection and Ranging (LIDAR) sensors. The intention of this paper is to provide a broad overview of what has been done and what could be done, to aid those designing vehicles and/or missions to the lunar surface.

Paul McKee↗