Patterns of regional site index across a North American boreal forest gradient
Explore the source record for details and available documents.
Paul M Montesano↗
Engineering topics
Paul M Montesano
Publications and source records attributed to Paul M Montesano.
Estimating Bare Earth in Sparse Boreal Forests With WorldView Stereo Imagery
Circumboreal forests are currently experiencing rapid climate warming which is altering their structure, productivity, and status as a carbon sink. Very-high resolution (VHR, <2 m) stereo derived digital surface models are available to monitor these forests, but, a similar resolution digital terrain model (DTM) is required to extract information about tree height, which is often used to estimate carbon content. To our knowledge, no openly available VHR DTM currently exists. To address this need, we developed approaches to extract DTMs by filtering VHR stereo point clouds (PCs) in sparse canopies of Alaska. Our evaluation consisted of two stereo processing methods with three PC search radii, at six different tree canopy cover (TCC) intervals. We found VHR DTMs were robust for estimating bare ground at TCC intervals less than 40% with vertical errors <1.6 m using airborne small footprint light detection and ranging (LiDAR) as reference.
Christopher S R Neigh↗
Storm Surge and Ponding Explain Mangrove Dieback in Southwest Florida Following Hurricane Irma
Mangroves buffer inland ecosystems from hurricane winds and storm surge. However, their ability to withstand harsh cyclone conditions depends on plant resilience traits and geomorphology. Using airborne lidar and satellite imagery collected before and after Hurricane Irma, we estimated that 62% of mangroves in southwest Florida suffered canopy damage, with largest impacts in tall forests (>10 m). Mangroves on well-drained sites (83%) resprouted new leaves within one year after the storm. By contrast, in poorly-drained inland sites, we detected one of the largest mangrove diebacks on record (10,760 ha), triggered by Irma. We found evidence that the combination of low elevation (median = 9.4 cm asl), storm surge water levels (>1.4 m above the ground surface), and hydrologic isolation drove coastal forest vulnerability and were independent of tree height or wind exposure. Our results indicated that storm surge and ponding caused dieback, not wind. Tidal restoration and hydrologic management in these vulnerable, low-lying coastal areas can reduce mangrove mortality and improve resilience to future cyclones.
David Lagomasino↗
The bioclimatic extent and pattern of the cold edge of the boreal forest: the circumpolar taiga-tundra ecotone
Current configurations of forest structure at the cold edge of the boreal may help understand the future of ecosystem functioning in high northern latitudes. The circumpolar biome boundary at the boreal (taiga) forest and tundra interface is an ecological transition zone (taiga-tundra ecotone; TTE) experiencing changes that affect its forest structure. We accounted for the TTE's horizontal forest structure with an estimate of its extent and pattern as represented by tree canopy cover (TCC). We quantified TCC patterns with an algorithm that describes its spatial gradient, and summarized landscape patterns of structure to represent heterogeneity, capturing abrupt, diffuse, and uniform forest at mesoscales. We used these landscape patterns to constrain the spatial extent of sparse and open canopy forest, and non-forest (forest-adjacent) edge that defines the TTE extent. The resulting map of the TTE extent is based on forest structure spatial patterns resolved at 30 m, highlights structural variability across landscapes, and helps distinguish tundra from boreal domains. We classified 14 594 landscapes as those associated with the TTE within a circumpolar bioclimatic envelope (11.575 million km2), where 44.83% of the area of these landscapes were forest and non-forest edge, yet 36.43% contributed to the TTE extent. We report the overall extent of the TTE (3.032 million km2) across North America and Greenland (53%), and Eurasia (47%), where 0.697 million km2 is non-forest edge, 0.549 million km2 is sparse forest, and 1.787 million km2 is open canopy forest. Diffuse forest landscapes dominate the TTE (79%), and abrupt landscapes (~19%) indicate portions of the TTE where sparse forest and non-forest edge are the prevailing structural patterns. This account of the TTE quantifies the area of the cold edge of the boreal forest where previous global estimates show high discrepancies, and can help target monitoring and prediction of circumpolar dynamics.
Paul M Montesano↗
Space-Based Observations for Understanding Changes in the Arctic-Boreal Zone
Observations taken over the last few decades indicate that dramatic changes are occurring in the ArcticBoreal Zone (ABZ), which are having significant impacts on ABZ inhabitants, infrastructure, flora and fauna, and economies. While suitable for detecting overall change, the current capability is inadequate for systematic monitoring and for improving process based and large scale understanding of the integrated components of the ABZ, which includes the cryosphere, biosphere, hydrosphere, and atmosphere. Such knowledge will lead to improvements in Earth system models, enabling more accurate prediction of future changes and development of informed adaptation and mitigation strategies. In this article, we review the strengths and limitations of current space based observational capabilities for several important ABZ components and make recommendations for improving upon these current capabilities. We recommend an interdisciplinary and stepwise approach to develop a comprehensive ABZ Observing Network (ABZON), beginning with an initial focus on observing networks designed to gain process based understanding for individual ABZ components and systems that can then serve as the building blocks for a comprehensive ABZON.
Bryan N Duncan↗
Boreal Canopy Surfaces from Spaceborne Stereogrammetry
Surface elevation estimates from high resolution spaceborne image (HRSI) stereogrammetry are used to examine fine-scaled structure of boreal forest canopies. These data can depict detailed spatial patterns of vertical forest structure at remote sites across the circumpolar domain where these estimates would otherwise be unavailable. This work examines where these estimates are most effective at describing vertical forest structure to explain which canopy surfaces they represent. We evaluated the variation in canopy surface estimates captured from four general types of HRSI digital surface models (DSMs) across the full range of boreal canopy cover.
Paul M Montesano↗
The Use of Sun Elevation Angle for Stereogrammetric Boreal Forest Height in Open Canopies
Stereogrammetry applied to globally available high resolution spaceborne imagery (HRSI; less than 5 m spatial resolution) yields fine-scaled digital surface models (DSMs) of elevation. These DSMs may represent elevations that range from the ground to the vegetation canopy surface, are produced from stereoscopic image pairs (stereo pairs) that have a variety of acquisition characteristics, and have been coupled with lidar data of forest structure and ground surface elevation to examine forest height. This work explores surface elevations from HRSI DSMs derived from two types of acquisitions in open canopy forests. We (1) apply an automated mass-production stereogrammetry workflow to along-track HRSI stereo pairs, (2) identify multiple spatially coincident DSMs whose stereo pairs were acquired under different solar geometry, (3) vertically co-register these DSMs using coincident spaceborne lidar footprints (from ICESat-GLAS) as reference, and(4) examine differences in surface elevations between the reference lidar and the co-registered HRSI DSMs associated with two general types of acquisitions (DSM types) from different sun elevation angles. We find that these DSM types, distinguished by sun elevation angle at the time of stereo pair acquisition, are associated with different surface elevations estimated from automated stereogrammetry in open canopy forests. For DSM values with corresponding reference ground surface elevation from spaceborne lidar footprints in open canopy northern Siberian Larix forests with slopes less than10, our results show that HRSI DSM acquired with sun elevation angles greater than 35deg and less than 25deg (during snow-free conditions) produced characteristic and consistently distinct distributions of elevation differences from reference lidar. The former include DSMs of near-ground surfaces with root mean square errors less than 0.68 m relative to lidar. The latter, particularly those with angles less than 10deg, show distributions with larger differences from lidar that are associated with open canopy forests whose vegetation surface elevations are captured. Terrain aspect did not have a strong effect on the distribution of vegetation surfaces. Using the two DSM types together, the distribution of DSM-differenced heights in forests (6.0 m, sigma = 1.4 m) was consistent with the distribution of plot-level mean tree heights (6.5m, sigma = 1.2 m). We conclude that the variation in sun elevation angle at time of stereo pair acquisition can create illumination conditions conducive for capturing elevations of surfaces either near the ground or associated with vegetation canopy. Knowledge of HRSI acquisition solar geometry and snow cover can be used to understand and combine stereogrammetric surface elevation estimates to co-register rand difference overlapping DSMs, providing a means to map forest height at fine scales, resolving the vertical structure of groups of trees from spaceborne platforms in open canopy forests.
Paul M Montesano↗