Engineering Papers⌕ Search

Engineering topics

Pastore, G.

Publications and source records attributed to Pastore, G..

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Single-size and cluster dynamics modeling of intra-granular fission gas bubbles in UO 2

For this work, we perform simulations of intra-granular fission gas bubble evolution in UO 2 using both a relatively simple, computationally inexpensive single-size model and a detailed cluster dynamics model. Simulations encompass 36 experimental cases from 4 different databases, covering various temperature and burnup levels. We systematically compare results from the two models to each other and to post-irradiation experimental data of bubble average size and number density. Overall, the model-to-model comparisons reveal an excellent agreement across the set of simulations. This outcome indicates that, in spite of the underlying assumptions, the single-size model provides a good approximation of the complex physical behavior that is more rigorously described by the cluster dynamics model. Qualitatively, both models reproduce the trends of the experimental data with temperature and burnup correctly. Quantitatively, calculated results are either in good agreement with the data or within errors that appear consistent with the inherent uncertainties. Moreover, for the single-size model, we demonstrate and assess a multiscale approach whereby values for the fission gas atom diffusion coefficient from separate atomistic calculations are used. Systematic comparisons to experimental data point out a credible accuracy of the multiscale model.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

Improvement of the $\mathrm{BISON U_3Si_2}$ modeling capabilities based on multiscale developments to modeling fission gas behavior

Uranium silicide (U 3 Si 2 ) is a concept explored as a potential alternative to UO 2 fuel used in light water reactors (LWRs) since it may improve accident tolerance and economics due to its higher thermal conductivity and increased uranium density. U 3 Si 2 has been previously used in research reactors in the form of dispersion fuel, but operated at lower temperatures than commercial LWRs. The research reactor data illustrated that significant gaseous swelling occurs as the fuel burnup increases. Therefore, it is imperative to understand the fission gas behavior of U 3 Si 2 under higher temperature LWR operating conditions. In this work, molecular dynamics and phase-field modeling techniques are used to reduce the uncertainty in select modeling assumptions made in developing the fission gas behavior model for U 3 Si 2 in the BISON fuel performance code. These lower length scale informed models are then utilized in the validation of BISON U 3 Si 2 modeling capabilities to simulate the ATF-1 experiments irradiated in the Advanced Test Reactor (ATR). Sensitivity analysis (SA) and uncertainty quantification (UQ) are included as part of the validation process to identify where further experiments and lower length scale modeling would be beneficial. Here, the multiscale modeling approach utilized in this work can be applied to new fuel concepts being explored for both LWRs and advanced reactors (e.g., uranium nitride, uranium carbide).

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2018

Milestone Report: Grain growth and fission gas behaviour in doped UO 2 M2MS-18LA0201034

Here, the microstructure of UO 2 can be modified during nuclear fuel fabrication by using additives. Several dopants (e.g. Cr, Ti, V, Mg, Nb) are used to enhance grain growth and densification during sintering. In previous work, we used atomic scale simulation techniques to identify a common interstitial solution mechanism for a range of dopants that form positively charged defects at sintering temperatures. As a result, negatively/positively charged defect concentrations were enhanced/suppressed relative to undoped fuel under the same conditions (temperature and oxygen partial pressure). Importantly U and fission gas migration is vacancy mediated, such that the increase in the concentration uranium vacancies (which have negative charge), due to doping, causes an increase in U and fission gas diffusivity. This is important because U diffusivity is the rate limiting step in mass transport during sintering and bulk fission gas diffusivity is the underlying property that governs fission gas release. In this work, we implement analytical expressions for uranium vacancy concentrations in doped fuel (based on atomic scale results) into mesoscale and engineering scale simulations of sintering and fission gas release. It is shown that densification is dramatically enhanced at 1850 K and 1950 K due to dopant solution and that Mn-doping has a greater effect than the more widely used Cr-doping. The effect of both dopants is strongly temperature dependent and is negligible below approximately 1800 K. The effect of enlarged grain size and enhanced fission gas diffusivity has been included in BISON. Fuel temperatures under normal operating conditions are not sufficient to activate the enhanced fission gas diffusivity mechanism predicted by atomic scale calculations. Therefore, the benefits of enlarged grains for reduced fission gas release should not undermined by enhanced fission gas diffusivity for doped UO 2 .

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2018

Helium diffusivity in oxide nuclear fuel: Critical data analysis and new correlations

Helium is relevant in determining nuclear fuel behaviour. It affects the performance of nuclear fuel both in reactor and in storage conditions. Helium becomes important in reactor conditions when high burnups are targeted or MOX fuel is used, whereas for storage conditions it can represent a threat to the fuel rods integrity. The accurate knowledge of helium behaviour combined with predictive model capabilities is fundamental for the safe management of nuclear fuel, with helium diffusivity being a critical property. For this reason, a considerable number of separate effect experiments in the last fifty years investigated helium diffusivity in nuclear fuel. The aim of this work is to critically review and assess the experimental results concerning the helium diffusivity. Experimental results are critically analysed in terms of the helium introduction technique used (either infusion, implantation or doping) and of sample characteristics (single crystal, poly-crystal or powder). Accordingly, we derived two different correlations for the diffusivity. Clearly, each of the new correlations corresponds to a limited range of application conditions, depending on the experimental data used to derive it. We provide recommendations regarding the proper application conditions for each correlation (e.g., in reactor or storage conditions).

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2017

Development of a LOCA Experimental Benchmark for BISON - Milestone L2:FMC.P15.08

Since 2013 CASL has been planning and working towards a PWR LOCA Challenge Problem. Since BISON is the CASL fuel rod simulation platform, it plays a central role in that activity. The goal of the FY-17 CASL milestone reported here was to develop an Experimental Benchmark for LOCA analysis using BISON. Activities encompassed both code development and validation. This report provides a current snapshot of BISON’s capability for LOCA behavior including: 1) a summary of code extensions to facilitate accident analysis, 2) a series of separate effects tests, and 3) initial code validation to complex integral rod LOCA behavior. Conclusions from each of these main activities are summarized below. The key material and behavior models required to address transient high-temperature phenomena occurring during LOCAs in a standard PWR have now been implemented in BISON. These apply specifically to UO2 fuel, Zircaloy cladding and water coolant. During FY-17 important new capability to address axial UO2 fuel relocation (for 1.5D geometry) and account for oxidation energy deposition in cladding, were included. Planned future development efforts include extending the axial fuel relocation model from 1.5D to 2D/3D and improving BISON’s fission gas release model to include transient gas release associated with the high burnup structure (HBS) in high burnup fuel. Additionally, investigation of potential anisotropic creep behavior in Zircaloy cladding is planned, assuming sufficient experimental data are available to support this effort. A substantial number of separate effects validation cases (42 tests from 3 experimental series) have been completed to compare BISON predictions to measured ballooning and burst behavior for Zircaloy cladding. Such experiments include a wide variety of pressures, temperatures and loading rates. In general, BISON predictions of burst temperature, pressure and burst time are very reasonable. For one experimental series, however, involving both very high temperatures and strain rates, BISON systematically over-predicts the cladding hoop strain. Investigation of this discrepancy is an important and planned activity. With another experiment an effort was made to investigate 3D cladding response due to an azimuthal temperature variation. Results indicated 3D effects are potentially important in fuel rod analysis during LOCAs and will be further investigated in the future. BISON validation to a series of integral fuel rod experiments has also been completed. These experiments involve all fuel and cladding phenomena relevant to LOCA conditions, and can include complexities associated with irradiated fuel relative to fresh fuel. Such experiments also generally include complex thermal-hydraulic boundary conditions. Four experiments (6 rods) have been considered to date including simulated fuel (ZrO2) and both fresh and high-burnup UO2. Test rods ranged from rodlets to full length commercial PWR fuel rods. As with the separate effects experiments, BISON predictions of burst temperature, pressure and burst time are generally very reasonable. Comparisons to cladding peak strain and rod outer diameter axial profiles are less satisfactory, and identify material models and possibly modeling approximations (e.g., 2D-RZ vs 3D geometries) requiring additional investigation. Validation of BISON for integral rod LOCA behavior is by no means complete, with additional cases planned.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2017

Fuel performance modeling of FeCrAl cladding failure during loss of coolant conditions

Accident tolerant materials are defined as those that provide significantly increased response time in the event of an accident while providing similar or improved performance as the conventional UO2/Zircaloy-4 fuel rods during normal operation. One avenue for materials to demonstrate enhanced accident tolerance is to have improved reaction (e.g., oxidation) kinetics with steam, resulting in slower hydrogen (or other combustible gases) generation rate, while maintaining acceptable thermo-mechanical properties, fuel-clad interactions, and fission product behavior. Due to their improved reaction kinetics with steam compared to Zircaloy-4, iron-chromium-aluminum (FeCrAl) alloys are being considered as an accident tolerant cladding material. In order to determine whether FeCrAl alloys are indeed accident tolerant materials, comparisons between conventional zirconium-based claddings under accident conditions is required. To this end, we have developed a burst (failure) criterion for FeCrAl using existing experimental data for first-generation alloys. This model was incorporated into the BISON fuel performance code to perform comparative studies with Zircaloy-4 cladding tubes under non-oxidizing and oxidizing LOCA conditions. The separate effects LOCA conditions considered were adopted from the PUZRY and REBEKA test series. Due to the fact that FeCrAl alloys have a larger thermal absorption cross-section and higher stiffness than Zircaloy-4, cladding thickness will be smaller for FeCrAl than for Zircaloy-4. Three different cladding thicknesses were analyzed in this work. The results indicate that for both non-oxidizing (PUZRY) and oxidizing (REBEKA) LOCA conditions, FeCrAl has similar burst behavior (i.e., time to burst and pressure at burst) as Zircaloy-4. It should be noticed that this study used data for first-generation FeCrAl alloys to develop the burst criterion. Although no burst data?currently exists for C35M (a second-generation FeCrAl alloy under development at Oak Ridge National Laboratory), improved burst behavior is anticipated. As burst data for C35M becomes available the burst criterion will be updated and the simulations revisited to determine the accident tolerance of second-generation FeCrAl alloys.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2017

Nuclear Energy Advanced Modeling and Simulation (NEAMS) Accident Tolerant Fuels High Impact Problem: Engineering Scale Models and Analysis

As part of the Department of Energy's Nuclear Energy Advanced Modeling and Simulation program, an Accident Tolerant Fuel High Impact Problem was initiated at the beginning of fiscal year 2015 to investigate the behavior of \usi\ fuel and iron-chromium-aluminum (FeCrAl) cladding under normal operating and accident reactor conditions. The High Impact Problem was created in response to the United States Department of Energy's renewed interest in accident tolerant materials after the events that occurred at the Fukushima Daiichi Nuclear Power Plant in 2011. The High Impact Problem is a multinational laboratory and university collaborative research effort between Idaho National Laboratory, Los Alamos National Laboratory, Argonne National Laboratory, and the University of Tennessee, Knoxville. This report summarizes the latest recommended material models to be used for engineering scale simulations based upon lower length scale analyses described elsewhere. Comparative analyses between traditional fuel rods (U 3 Si 2 /Zircaloy-4) and the proposed accident tolerant fuel rods (UO 2 /FeCrAl and U 3 Si 2 /Zircaloy-4) under normal operation, loss of coolant, and reactivity insertion conditions have been revisited using the latest state-of-the-art models implemented into the Bison fuel performance code. Sensitivity analyses have also been redone to take into account the latest knowledge on uncertain parameters.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2017

BISON Validation for LOCA and PCMI Behaviour Using Measurements From the Halden Reactor Project

BISON is a finite element-based nuclear fuel performance code that has been under development at Idaho National Laboratory (INL) since 2009. The code is applicable to both steady and transient fuel behavior and has been used to analyze a variety of fuel forms in 1D spherical, 1.5D and 2D axisymmetric, or 3D geometries. Efforts are underway to validate BISON for application to Light Water Reactor fuels using, to a large extent, experimental data from the Halden Reactor Project. Recent validation activities have included both Loss of Coolant Accident (LOCA) and Pellet Clad Mechanical Interaction (PCMI) experiments. Two such validation cases, the IFA-650.10 LOCA test and the IFA-629.4 power ramp test (PCMI), are summarized in this paper.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2017

Modeling Fission Gas Behaviour with the BISON Fuel Performance Code

The behavior of fission gases (Xe, Kr) is of critical importance to nuclear fuel performance, because it determines both the amount of fuel swelling and the quantity of fission gas released to the fuel rod plenum. It follows that accurate models of fission gas behavior need to be developed for the calculation of fission gas swelling and release in fuel performance codes, such as the BISON code developed at Idaho National Laboratory (INL). To this end, the fission gas behavior model included in BISON is being continually extended and improved. In the present contribution, we give an account of the most recent developments and results on modeling fission gas behavior in uranium dioxide fuel with BISON.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2017

Development of a RIA Experimental Benchmark for BISON

This milestone report documents FY-17 efforts for the Reactivity Initiated Accident (RIA) Challenge Problem to demonstrate PWR RIA Fuel Performance capability. The challenge problem implementation plan identified a series of experimental comparisons to validate RIA capability in BISON. The specific cases chosen for FY-17 are CABRI REP Na-2, 3, 5, and 10. Work was also performed on the Nuclear Safety Research Reactor (NSRR) FK-1, 2, 3, 4, 5, 6, 7, 8, and 9 cases.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2017

Nuclear Energy Advanced Modeling and Simulation (NEAMS) Accident Tolerant Fuels High Impact Problem: U 3 Si 2 Modeling Capabilities

U 3 Si 2 fuel is a potential candidate replacement for UO 2 in light water reactor fuel rods due to its higher uranium density and thermal conductivity. Its lower melting temperature and significant gaseous swelling may be of concern. The aggressive development schedule of the United States Department of Energy’s (DOE) Advanced Fuels Campaign (AFC) to have potential accident tolerant fuels (ATF) concepts in lead test rods or assemblies by 2022 has necessitated the need for advanced modeling and simulation techniques to investigate the behavior of these materials under normal operating and accident conditions. This report presents the modeling capabilities for U 3 Si 2 fuel at the engineering (continuum) scale developed as part of the Nuclear Energy Advanced Modeling and Simulation (NEAMS) high impact problem (HIP). In this report, the models incorporated into the BISON fuel for U 3 Si 2 are described and comparisons to conventional UO 2 for separate effects cases are presented.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2017

UFD Proof-of-Concept Demonstration

The BISON Spent Nuclear Fuel modeling capability has been demonstrated through simulations of the complete nuclear fuel lifecycle including in-reactor irradiation, spent fuel pool cooling, vacuum drying and finally dry cask storage. The importance of hydrogen in the cladding and the formation of hydrides at various stages of the fuel lifecycle have been a focus of the initial development work. In addition, the integration in BISON of a hydride damage model has improved the prediction of the cladding mechanical behavior. The work described in this report was performed under funding from the Nuclear Energy Advanced Modeling and Simulation (NEAMS) program. This report is issued in satisfaction of the level 2 milestone M2MS-17IN0201012 on UFD Proof-of-Concept Demonstration for the INL Engineering-Scale Fuel Performance (BISON) Workpackage.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2017

A semi-empirical model for the formation and depletion of the high burnup structure in UO 2

In the rim zone of UO 2 nuclear fuel pellets, the combination of high burnup and low temperature drives a microstructural change, leading to the formation of the high burnup structure (HBS). In this work, we propose a semi-empirical model to describe the formation of the HBS, which embraces the polygonisation/recrystallization process and the depletion of intra-granular fission gas, describing them as inherently related. To this end, we per-formed grain-size measurements on samples at radial positions in which the restructuring was incomplete. Moreover, based on these new experimental data, we assume an exponential reduction of the average grain size with local effective burnup, paired with a simultaneous depletion of intra-granular fission gas driven by diffusion. The comparison with currently used models indicates the applicability of the herein developed model within integral fuel performance codes.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2017

Analysis of transient fission gas behaviour in oxide fuel using BISON and TRANSURANUS

The modelling of fission gas behaviour is a crucial aspect of nuclear fuel analysis in view of the related effects on the thermo-mechanical performance of the fuel rod, which can be particularly significant during transients. Experimental observations indicate that substantial fission gas release (FGR) can occur on a small time scale during transients (burst release). To accurately reproduce the rapid kinetics of burst release in fuel performance calculations, a model that accounts for non-diffusional mechanisms such as fuel micro-cracking is needed. In this work, we present and assess a model for transient fission gas behaviour in oxide fuel, which is applied as an extension of diffusion-based models to allow for the burst release effect. The concept and governing equations of the model are presented, and the effect of the newly introduced parameters is evaluated through an analytic sensitivity analysis. Then, the model is assessed for application to integral fuel rod analysis. The approach that we take for model assessment involves implementation in two structurally different fuel performance codes, namely, BISON (multi-dimensional finite element code) and TRANSURANUS (1.5D semi-analytic code). The model is validated against 19 Light Water Reactor fuel rod irradiation experiments from the OECD/NEA IFPE (International Fuel Performance Experiments) database, all of which are simulated with both codes. The results point out an improvement in both the qualitative representation of the FGR kinetics and the quantitative predictions of integral fuel rod FGR, relative to the canonical, purely diffusion-based models, with both codes. The overall quantitative improvement of the FGR predictions in the two codes is comparable. Furthermore, calculated radial profiles of xenon concentration are investigated and compared to experimental data, demonstrating the representation of the underlying mechanisms of burst release by the new model.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗