Engineering Papers⌕ Search

Engineering topics

Passian, Ali

Publications and source records attributed to Passian, Ali.

65 records · Page 4

Optical and plasmonic spectroscopy with cantilever shaped materials

Micro- and nanocantilevers, which have traditionally played a vital role in the development of force microscopy, and more recently a special role in biological, chemical and physical sensing and detection, have received comparatively little attention in optical spectroscopy. We present an investigation of the optical response of microcantilevers towards their utilization in integrated spectrometers in a broad part of the spectrum. By discussing the overall actuation mechanism we describe how surface modes may effectively contribute to the final signal. Using Fourier transform infrared (FTIR) spectroscopy, a series of multilayered microcantilevers are characterized for their spectral response in the range from 7800 to 400 cm{sup -1}. Transmission FTIR and FTIR photothermal spectroscopy are carried out using polystyrene with well-established infrared spectra.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Nanometrology of delignified Populus using mode synthesizing atomic force microscopy

The study of the spatially resolved physical and compositional properties of materials at the nanoscale is increasingly challenging due to the level of complexity of biological specimens such as those of interest in bioenergy production. Mode synthesizing atomic force microscopy (MSAFM) has emerged as a promising metrology tool for such studies. It is shown that, by tuning the mechanical excitation of the probe-sample system, MSAFM can be used to dynamically investigate the multifaceted complexity of plant cells. The results are argued to be of importance both for the characteristics of the invoked synthesized modes and for accessing new features of the samples. As a specific system to investigate, we present images of Populus, before and after a holopulping treatment, a crucial step in the biomass delignification process.

09 BIOMASS FUELS↗

Discontinuity induced angular distribution of photon plasmon coupling

Metal-dielectric transitions are important structures that can display a host of optical characteristics including excitation of plasmons. Metal-dielectric discontinuities can furthermore support plasmon excitation without a severe condition on the incident angle of the exciting photons. Using a semi-infinite thin gold film, we study surface plasmon (SP) excitation and the associated electromagnetic near-field distribution by recording the resulting plasmon interference patterns. In particular, we measure interference periods involving SPs at the scanable metal/air interface and the buried metal/glass one. Supported by optical near-field simulations and experiments, we demonstrate that the metal/glass surface plasmon is observable over a wide range of incident angles encompassing values above and below the critical incident angle. As a result, it is shown that scanning near-field microscopy can provide quantitative evaluation of the real part of the buried surface plasmon wavevector.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Optomechanical spectroscopy with broadband interferometric and quantum cascade laser sources

The spectral tunability of semiconductor-metal multilayer structures can provide a channel for the conversion of light into useful mechanical actuation. Response of suspended silicon, silicon nitride, chromium, gold, and aluminum microstructures is shown to be utilized as a detector for visible and infrared spectroscopy. Both dispersive and interferometric approaches are investigated to delineate the potential use of the structures in spatially resolved spectroscopy and spectrally resolved microscopy. The thermoplasmonic, spectral absorption, interference effects, and the associated energy deposition that contributes to the mechanical response are discussed to describe the optomechanical detection to be of potential importance in future integrated spectrometers.

30 DIRECT ENERGY CONVERSION↗

Atomic force microscopy of silica nanoparticles and carbon nanohorns in macrophages and red blood cells

The emerging interest in understanding the interactions of nanomaterial with biological systems necessitates imaging tools that capture the spatial and temporal distributions and attributes of the resulting nano-bil amalgam. Studies targeting organ specific response and/ot nanoparticle-specific system toxicity would be profoundly benefited from tools that would allow imaging and tracking of in-vivo or in-vitro processes and particle-fate studies. Recently we demonstrated that mode systhesizing atomic force microscopy (MSAFM) can provide subsurface nanoscale informations on the mechanical properties of materials at the nanoscale. However, the underlying mechanism of this imaging methodology is currently subject to theoretical and experimental investigation. In this paper we present further analysis by investigating tip-sample excitation forces associated with nanomechanical image formation. Images and force curves acquired under various operational frequencies and amplitudes are presented. We examine samples of mouse cells, where buried distributions of single-walled carbon nanohorns and silica nanoparticles are visualized.

Atomic force microscopy↗

Synthesizing new modes for subsurface atomic force microscopy

Non-destructive, nanoscale characterization techniques are needed to understand both synthetic and biological materials. The atomic force microscope uses a force-sensing cantilever with a sharp tip to measure the topography and other properties of surfaces. As the tip is scanned over the surface it experiences attractive and repulsive forces that depend on the chemical and mechanical properties of the sample. Here we show that an atomic force microscope can obtain a range of surface and subsurface information by making use of the nonlinear nanomechanical coupling between the probe and the sample. This technique, which is called mode-synthesizing atomic force microscopy, relies on multi-harmonic forcing of the sample and the probe. A rich spectrum of first- and higher-order couplings is discovered, providing a multitude of new operational modes for force microscopy, and the capabilities of the technique are demonstrated by examining nanofabricated samples and plant cells.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Properties of Index Transforms in Modeling of Nanostructures and Plasmonic Systems

In material structures with nanometer scale curvature or dimensions electrons may be excited to oscillate in confined spaces. The consequence of such geometric confinement is of great importance in nano-optics and plasmonics. Furthermore, the geometric complexity of the probe-substrate/sample assemblies of many scanning probe microscopy experiments often pose a challenging modeling prob- lem due to the high curvature of the probe apex or sample surface protrusions and indentations. Index transforms such as Mehler-Fock and Kontorovich-Lebedev, where integration occurs over the index of the function rather than over the argument, prove useful in solving the resulting differential equations when modeling optical or electronic response of such problems. By considering the scalar potential distribution of a charged probe in presence of a dielectric substrate, we discuss certain implications and criteria of the index transform and prove the existence and the inversion theorems for the Mehler- Fock transform of the order m ∈ N 0 . The probe charged to a potential V0 , measured at the apex, is modeled, in the non-contact case, as a one-sheeted hyperboloid of revolution, and in the contact case or in the limit of a very sharp probe, as a cone. Using the Mehler-Fock integral transform in the first case, and the Fourier integral transform in the second, we discuss the necessary conditions imposed on the potential distribution on the probe surface.

36 MATERIALS SCIENCE↗

Observation of an anomalous mass effect in microcantilever-based biosensing caused by adsorbed DNA

Quantifying adsorbed mass using resonance frequency variation in a microcantilever is an established technique. However, when applied to adsorbed mass determination in liquids, the resonance frequency variations represent several contributions. While the discrepancy between the apparent and real adsorbed mass is negligible for measurements in air, it can be significant in liquids. Here we present an anomalous effect of adsorbed DNA on the resonance frequency of microcantilevers which cannot be explained using current models. Our findings suggest that the measured frequency shifts may be explained on the basis of a hydrodynamic interaction caused by the adsorbed molecules on the cantilever.

59 BASIC BIOLOGICAL SCIENCES↗

Characterization of biomass by force microscopy

Scanning probe microscopy has emerged as a powerful approach to a broader understanding of the molecular architecture of cell walls, which may shed light on the challenge of efficient cellulosic ethanol production. We have obtained preliminary images of both poplar and switchgrass samples using atomic force microscopy (AFM). The results show distinctive features that are shared by switchgrass and poplar. These features may be attributable to the lignocellulosic cell wall composition, as the collected images exhibit the characteristic macromolecular globule structures attributable to the lignocellulosic systems. Using both AFM and scanning near-field ultrasound holography (SNFUH), in the case of poplar, the images clearly show the cell wall structure. The results are of importance in providing a better understanding of the characteristic features of both mature plant cells as well as developing cells. In addition, we present spectroscopic investigation of the same samples.

09 BIOMASS FUELS↗

On the orthogonality of the MacDonald s functions

A proof of an orthogonality relation for the MacDonald's functions with identical arguments but unequal complex lower indices is presented. The orthogonality is derived first via a heuristic approach based on the Mehler-Fock integral transform of the MacDonald's functions, and then proved rigorously using a polynomial approximation procedure.

97 MATHEMATICS AND COMPUTING↗

Characterization of surface position in a liquid dispensing orifice

Precision microdispencing technology delivers picoliter amounts of fluid for printing, electronic, optical, chemical and biomedical applications. In particular, microjetting is capable of accurate, flexible, and non-contact coating with polymers, thus allowing the functionalization of delicate microsensors such as microcantilevers. Information on various phases of droplet formation are important to control volume, uniformity, velocity and rate. One such aspect is the ringing of the meniscus after droplet breakoff which can affect subsequent drop formation. We present analysis of an optical characterization technique and experimental results on the behaviour of menisus oscillations in an orifice of a piezoelectric microjet.

42 ENGINEERING↗