Engineering PapersSearch

Engineering topics

Partridge, Harry

Publications and source records attributed to Partridge, Harry.

At least 55 records · Page 3

A Comparison of Correlation-Consistent and Pople-Type Basis Sets

Correlation-consistent basis sets are compared with Pople-type basis sets for the calculation of atomization energies using the G2(B3LYP/MP2/CC) approach. Without a higher-level correction, the smallest errors are found for the augmented- correlation-consistent polarized valence triple zeta plus tight d basis sets. However, after inclusion of a higher-level correction, the combination of the 6-311G** basis set for the high-level correlation treatment and 6-311+G(3df,2p) for the MP2 step yields the best results. At the spin-unrestricted CCSD(T) level and for the basis set considered in this work, the G2(B3LYP/MP2/CC) approach works better than the PCIX approach for the atomization energies of the 55 G2 molecules.

Bauschlicher, Charles W., Jr.

Potential Energy Curves and Collisions Integrals of Air Components: Interactions Involving Ionized Atoms - 2

Collision integrals are fundamental quantities required to determine the transport properties of the environment surrounding aerospace vehicles in the upper atmosphere. These collision integrals can be determined as a function of temperature from the potential energy curves describing the atomic and molecular collisions. Ab initio calculations provide a practical method of computing the required interaction potentials. In this work we will discuss recent advances in scattering calculations with an emphasis on the accuracy that is obtainable. Results for interactions of the atoms and ionized atoms of nitrogen and oxygen will be reviewed and their application to the determination of transport properties, such as diffusion and viscosity coefficients, will be examined.

Stallcop, James R.

Theoretical Studies of the Quasi-Bound Vibrational Levels in the B State of CH3

Consider the calculation of the oscillator strength of th B yielded by X electronic transition in CH3. The X state is strongly bound, but in the B state, CH3 is pre-dissociated by H atom tunneling through a potential energy barrier to form CH2+H. If we turn off pre-dissociation by making the potential outside of the barrier repulsive, the calculated 0-0 oscillator strength for CD3 from high quality ab initio potential and transition moment data along with accurate ro-vibrational wavefunctions is 0.0212, which is a factor of two greater than experiment. This discrepancy is largely due to the neglect of pre-dissociation. In this poster we explore techniques for including pre-dissociation in the calculations.

Schwenke, David W.

The Dissociation Energies of CH4 and C2H2 Revisited

The bond dissociation energies of CH4 and C2H2 and their fragments are investigated using basis set extrapolations and high levels of correlation. The computed bond dissociation energies (D(sub e)) are accurate to within 0.2 kcal/mol. The agreement with the experimental (D(sub 0)) values is excellent if we assume that the zero-point energy of C2H is 9.18 kcal/mol. The effect of core (1s) correlation on the bond dissociation energies of C-H bonds is shown to vary from 0.2 to 0.7 kcal/mol and that for C-C bonds varies from 0.4 to 2.2 kcal/mol.

Partridge, Harry

The Dissociation Energies of AlH2 and AlAr

The D(sub 0) values for AlH2 and AlAr are computed using the coupled cluster approach in conjunction with large basis sets. Basis set superposition and spin-orbit effects are accounted for as they are sizeable due to the small binding energy. The computed dissociation energy for AlAr is 101 /cm , which is 83% of the experimental value (122.4/ cm). Our best estimate for the H2 binding energy in AlH2 is 40 +/- 28 /cm.

Ricca, Alessandra

Theoretical Study of the B(sup 3) Sigma(sup -, sub u) - X(sup3)Sigma(sub g, sup -) and B"(sup 3)Pi(sub u) - X(sup 3)Sigma(sub g, sup -) Band Systems of S(sub 2)

Multireference configuration-interaction (MRCI) wavefunctions and potential energy curves have been calculated for the X(sup 3)Sigma(sub g,sup -), B(sup 3)Sigma(sub u, Sup -) and B"(sup 3)Pi((sub u) states of S(sub 2) using correlation consistent Gaussian basis sets. These wavefunctions are utilized to compute the the transition dipole moments of the B(sup 3)Sigma(sub g, sup -) - X(sup 3) Sigma(sub g, sup -) and B"(sup 3)Pi(sub u) - X(sup 3)Sigma(sub g, sup -) systems. Oscillator strengths, transition probabilities, and radiative lifetimes are computed for the X-B system and comparison is made with experimental data.

Pradhan, Atul D.

A Redetermination of the Dissociation Energy of MgO(+)

In 1986, we reported a dissociation energy (D(sub 0) of 2.31 eV for the X(sup 2)Pi ground state of MgO(+). This value was determined by computing the dissociation energy to the Mg(2+) + O(-) limit and adjusting the value to the Mg(+) + O limit using the experimental Ionization Potential (IP) of Mg(+) and the Electron Affinity (EA) of O. The success of this method relies on the assumption that there is little covalent contribution to the bonding. The very small (0.04 eV) correlation contribution to the binding energy was taken as corroboration for the validity of this approach. Our earlier theoretical value was estimated to be accurate to at least 0.2 eV. It is in excellent agreement with the subsequent value of 2.30 +/- 0.13 eV determined by Freiser and co-workers from photodissociation experiments. It is also consistent with the upper (less than 3.1 eV) and lower (greater than 1.1 eV) bounds determined by Rowe obtained by studying the reactions of Mg(+) with 03 and NO2. However, it is inconsistent with an upper bound of 1.7 eV reported by Kappes and Staley based on their failure to observe MgO(+) in the reaction of Mg(+) with N2O. The picture became somewhat clouded, however, by the recent guided-ion beam mass spectrometric studies of Dalleska and Armentrout. Their initial analysis of the reaction data for Mg(+) + O2 lead to a bond dissociation energy of 2.92 +/- 0.25 eV, which is considerably larger than the value of 2.47 +/- 0.06 eV deduced from their studies of the Mg(+)+NO2 reaction.

Bauschlicher, Charles W., Jr.

Theoretical Study of the Low-Lying States of TiHe(+),TiNe(+),TiAr(+),VAr(+),CrHe(+),CrAr(+),FeHe(+),FeAr(+),CoHe(+),and CoAr(+)

The potential energy curves for the manifold of molecular states dissociating to the lowest transition metal ion states derived from the 3d(sup n+1) and 3d(sup n)4s(sup 1) occupations have been determined for selected transition-metal ion- rare gas systems. These curves have been computed using large basis sets, and the state-averaged complete- active-space self-consistent-field/multireference configuration interaction level of electron correlation treatment. In general, the families of curves derived from the 3d(sup n+1) and 3d(sup n)4s(sup 1) metal occupations are disjoint; however, for Ti(+) there is a strong mixing of the 3d(sup 2)4s(sup 1) and 3d(sup 3) asymptotes, because of the small separation between the asymptotes. This mixing leads to a failure of single-reference-based techniques; this is discussed in the context of our previous single-reference-based treatments.

Partridge, Harry

Heat of Formation of CH2OH

The heat of formation of CH2OH at 298 K is determined to be -15.2 +/- 3.5 kJ/mol using high levels of theory. This is in good agreement with some recent experimental determinations. The assignment of the error bars is discussed in detail and compared with that assigned in previous theoretical calculations. The largest uncertainty arises from the calculation of the zero-point energy.

Bauschlicher, Charles W., Jr.

The Low-Lying States of AlCu and AlAg

The singlet and triplet states of AlCu and AlAg below about 32 000/cm are studied using the internally contracted multireference configuration-interaction method. A more elaborate study of the X(sup 1)Sum(sup +) ground state of AlCu is undertaken using extended Gaussian basis sets, including the effect of inner-shell correlation and including a perturbational estimate of relativistic effects. Our best estimate of the spectroscopic constants (r(sub 0), DeltaG(sub 1/2), and D(sub 0)) for the X(sup 1)Sum(sup+) state with the experimental values in parentheses are: 4.416(4.420) a(sub 0), 295 (294) /cm, and 2.318 (2.315) eV. The calculations definitively assign the upper state in the observed transition at 14 892/cm to the lowest (sup 1)Prod state. The calculated spectroscopic constants and radiative lifetime for the (sup 1)Prod state are in good agreement with experiment. The calculations support the tentative assignments of Behm et al. for three band systems observed in the visible region between 25 000 and 28 000 / cm. However, the computed spectroscopic constants are in very poor agreement with those deduced from an analysis of the spectra. Analogous theoretical results for AlAg suggest that the (2)(sup 3)Prod, (3)(sup 3)Prod, and (3)(sup 1)Sum(sup +) states account for the bands observed, but not assigned, by Duncan and co-workers.

Bauschlicher, Charles W., Jr.

Theoretical Dipole Moment for the X211 State of NO

The dipole moment function for the X(sup 2)II state of NO is studied as a function of the completeness in both the one- and n-particle spaces. Einstein coefficients are presented that are significantly more accurate than previous tabulations for the higher vibrational levels. The theoretical values give considerable insight into the limitations of recently published ratios of Einstein coefficients measured by spectrally resolved infrared chemiluminescence.

Langhoff, Stephen R.

Molecular Spectroscopy by Ab Initio Methods

Due to recent advances in methods and computers, the accuracy of ab calculations has reached a point where these methods can be used to provide accurate spectroscopic constants for small molecules; this will be illustrated with several examples. We will show how ab initio calculations where used to identify the Hermann infrared system in N2 and two band systems in CO. The identification of all three of these band systems relied on very accurate calculations of quintet states. The analysis of the infrared spectra of cool stars requires knowledge of the intensity of vibrational transitions in SiO for high nu and J levels. While experiment can supply very accurate dipole moments for nu = 0 to 3, this is insufficient to construct a global dipole moment function. We show how theory, combined by the experiment, can be used to generate the line intensities up to nu = 40 and J = 250. The spectroscopy of transition metal containing systems is very difficult for both theory and experiment. We will discuss the identification of the ground state of Ti2 and the spectroscopy of AlCu as examples of how theory can contribute to the understanding of these complex systems.

Bauschlicher, Charles W., Jr.

Theoretical Study of the Nitric Oxide epsilon and 1100 A Bands

Potential-energy curves, transition-moment functions, Einstein Alpha coefficients and radiative lifetimes associated with the Rydberg state of nitric oxide are calculated in large Gaussian basis sets employing internally contracted MRCI from state-averaged CASSCF wave functions. Computationally, a strong sensitivity of the results to the choice of the CASSCF active space is seen, and careful examination of this behavior gives insight into matters related to the treatment of weakly occupied orbitals, which is a consideration in any study Rydberg excited states. The epsilon system transition-moment function and radiative lifetimes are in disagreement with another calculation in the literature, but reasons for the discrepancies are examined, and the present results are determined to be more accurate.

Sheehy, Jeffrey A.

Cr2 Revisited

Abstract Cr2 is studied at the coupled cluster singles and doubles level of theory, including a perturbational estimate of the connected triples [CCSD(T)]. Both spin restricted, RCCSD(T), and spin unrestricted, UCCSD(T), approaches are used. The UCCSD(T) bond length is much longer than the experimental value, while the RCCSD(T) bond length is shorter. This difference is due to the inability of the spin restricted Hartree-Fock reference to describe the antiferromagnetic coupling at larger r values. In contrast with the results obtained using density functional theory in conjunction with older functionals, the results obtained with recently developed functionals are in agreement with the UCCSD(T) results.

Bauschlicher, Charles W., Jr.

Ab Initio Calculations Applied to Problems in Metal Ion Chemistry

Electronic structure calculations can provide accurate spectroscopic data (such as molecular structures) vibrational frequencies, binding energies, etc.) that have been very useful in explaining trends in experimental data and in identifying incorrect experimental measurements. In addition, ab initio calculations. have given considerable insight into the many interactions that make the chemistry of transition metal systems so diverse. In this review we focus on cases where calculations and experiment have been used to solve interesting chemical problems involving metal ions. The examples include cases where theory was used to differentiate between disparate experimental values and cases where theory was used to explain unexpected experimental results.

Bauschlicher, Charles W., Jr.

Electronic spectroscopy of diatomic molecules

This article provides an overview of the principal computational approaches and their accuracy for the study of electronic spectroscopy of diatomic molecules. We include a number of examples from our work that illustrate the range of application. We show how full configuration interaction benchmark calculations were instrumental in improving the understanding of the computational requirements for obtaining accurate results for diatomic spectroscopy. With this understanding it is now possible to compute radiative lifetimes accurate to within 10% for systems involving first- and second-row atoms. We consider the determination of the infrared vibrational transition probabilities for the ground states of SiO and NO, based on a globally accurate dipole moment function. We show how we were able to assign the a(sup "5)II state of CO as the upper state in the recently observed emission bands of CO in an Ar matrix. We next discuss the assignment of the photoelectron detachment spectra of NO and the alkali oxide negative ions. We then present several examples illustrating the state-of-the-art in determining radiative lifetimes for valence-valence and valence-Rydberg transitions. We next compare the molecular spectroscopy of the valence isoelectronic B2, Al2, and AlB molecules. The final examples consider systems involving transition metal atoms, which illustrate the difficulty in describing states with different numbers of d electrons.

Partridge, Harry

The C-H Dissociation Energy of C2H6

The C-H bond energy in C2H6 is computed to be 99.76 +/- 0.35 kcal/mol, which is in excellent agreement with the most recent experimental values. The calculation of the C-H bond energy by direct dissociation and by an isodesmic reaction is discussed.

Bauschlicher, Charles W., Jr.

Ab initio Potential Energy Surface for H-H2

Ab initio calculations employing large basis sets are performed to determine an accurate potential energy surface for H-H2 interactions for a broad range of separation distances. At large distances, the spherically averaged potential determined from the calculated energies agrees well with the corresponding results determined from dispersion coefficients; the van der Waals well depth is predicted to be 75 +/- (mu)E(sub h). Large basis sets have also been applied to reexamine the accuracy of theoretical repulsive potential energy surfaces. Multipolar expansions of the computed H-H2 potential energy surface are reported for four internuclear separation distances (1.2, 1.401, 1.449, and 1.7a(sub 0) of the hydrogen molecule. The differential elastic scattering cross section calculated from the present results is compared with the measurements from a crossed beam experiment.

Partridge, Harry