Engineering topics

Parr, R. A.

Publications and source records attributed to Parr, R. A..

23 records · Page 2

NASA NTRS1982

Low gravity solidification structures in the tin-15 wt pct lead and tin-3 wt pct bismuth alloys

The tin-15 wt pct lead and tin-3 wt pct bismuth alloys have been solidified in the low-gravity environment provided by the Space Processing Applications Rocket (SPAR), on the KC-135 airplane, and at high 'g' levels in a centrifuge furnace. In each case the resultant cast structure was significantly different from that obtained in ground based experiments. Earlier low-gravity studies with the metal-model system NH4Cl-H2O presaged these results. This paper presents and discusses the influence of changes in the gravity force on the grain structure of these materials.

Johnston, M. H.↗

NASA NTRS1980

Composites of immiscible metals

Process aids development of composites of metals that are immiscible in liquid plase. Aligned uniformly dispersed spheres or rods of bismuth in aluminum, lead in aluminum, bismuth in zinc, and other systems have been prepared. Dispersed and matrix metal are selected according to desired electrical or mechanical properties.

Johnston, M. H.↗

NASA NTRS1980

Preparation of monotectic alloys having a controlled microstructure by directional solidification under dopant-induced interface breakdown

Monotectic alloys having aligned spherical particles of rods of the minor component dispersed in a matrix of the major component are prepared by forming a melt containing predetermined amounts of the major and minor components of a chosen monotectic system, providing in the melt a dopant capable of breaking down the liquid solid interface for the chosen alloy, and directionally solidfying the melt at a selected temperature gradient and a selected rate of movement of the liquid-solid interface (growth rate). Shaping of the minor component into spheres or rods and the spacing between them are controlled by the amount of dopant and the temperature gradient and growth rate values. Specific alloy systems include Al Bi, Al Pb and Zn Bi, using a transition element such as iron.

Parr, R. A.↗

NASA NTRS1980

The direct observation of unidirectional solidification as a function of gravity level

A saturated solution of NH4 Cl-H2O was solidified unidirectionally on earth at 1 g and in a suborbital rocket at 0.001 g. In the 1 g experiment, extensive fluid flow was apparent, creating plumes which carry numerous crystallites vertically above the interface in a manner associated with freckling in castings. During growth the interface grew into the liquid at the same rate as the individual dendrites. When solidified in low g, the interface grew at a slower rate than the individual dendrites. No plumes of liquid carrying crystals were seen, but several crystals did appear and grow ahead of the interface. Growth rates, dendrite morphologies and preferred crystallographic orientations are compared for the two experiment conditions. Results indicate that solidification in low gravity produces more uniform dendrite arm spacings, and tends to be controlled by diffusion and crystallographic orientation.

Johnston, M. H.↗

NASA NTRS1978

Growth parameters for aligned microstructures in directionally solidified aluminum-bismuth monotectic

Microstructures are shown for directionally solidified Al-3.4 wt pct Bi alloys with 0.2 wt pct Fe and 0.6 wt pct Fe additions. The third element causes the LI/SI + LII growth interface to become cellular. The bismuth forms at the cell nodes, appearing either as uniformly spaced arrays of spheres in the case of 0.2 wt pct Fe, or as an irregular network in the case of 0.6 wt pct Fe. Changes in the growth conditions which are known to control cellular structure are seen to have a similar effect on the bismuth spacing, with the cross sectional spacing varying as the inverse of G (Temperature gradient) x R(Growth rate).

Parr, R. A.↗