Engineering Papers⌕ Search

Engineering topics

Park, H

Publications and source records attributed to Park, H.

52 records · Page 3

EXPERIMENTAL TESTS OF VANADIUM STRENGTH MODELS AT HIGH PRESSURES AND STRAIN RATES

Experimental results showing significant reductions from classical in the Rayleigh-Taylor (RT) instability growth rate due to high pressure material strength or effective lattice viscosity in metal foils are presented. On the Omega Laser in the Laboratory for Laser Energetics, University of Rochester, target samples of polycrystalline vanadium are compressed and accelerated quasi-isentropically at {approx}1 Mbar pressures, while maintaining the samples in the solid-state. Comparison of the results with constitutive models for solid state strength under these conditions show that the measured RT growth is substantially lower than predictions using existing models that work well at low pressures and long time scales. High pressure, high strain rate data can be explained by the enhanced strength due to a phonon drag mechanism, creating a high effective lattice viscosity.

42 ENGINEERING↗

Memory effect of a single-walled carbon nanotube on nitride-oxide structure under various bias conditions.

We report on the memory effect of single-walled carbon nanotubes (SWNTs) placed on a nitride-oxide layer structure designed as a charge storage medium. The conductance of the SWNT was modulated by the injected charge in the nitride-oxide interface and the polarities of injected charges were then detected. A large on/off-state current ratio (>10{sup 4}) was obtained at a small program/erase voltage range (<3 V). We also studied the effect of a half-selected cell on the conductance of the SWNTs to identify the issues with cross-point memory architecture.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of deuteration on the structural and magnetic properties of CuF{sub 2}(H{sub 2}O){sub 2}(pyrazine).

The strongest magnetic exchange interactions in the quasi-two dimensional coordination polymer CuF{sub 2}(H{sub 2}O){sub 2}(pyz) (pyz=pyrazine), lie within the CuF{sub 2}(H{sub 2}O){sub 2} plane and involve F{hor_ellipsis}H-O hydrogen bonds. In order to better understand this novel magnetic exchange pathway, the fully deuterated derivative of this complex was prepared. The structural and magnetic properties of this isotopically substituted derivative are reported. A slight contraction of the unit cell and reduction in the Neel temperature was observed.

08 HYDROGEN↗

Resonating valence bond and {sigma}-charge density wave phases in a benzannulated phenalenyl radical.

We report the preparation of the first benzannulated phenalenyl neutral radical conductor (18), and we show that the compound displays unprecedented solid state behavior: the structure is dominated by two sets of intermolecular interactions: (1) a {pi}-chain structure with superimposed {pi}-overlap of the benzannulated phenalenyls along [0 0 1], and (2) an interchain overlap involving a pair of carbon atoms (C4) along [0 1 0]. The {pi}-chain-type stacking motif is reminiscent of previously reported phenalenyl radicals and the room temperature structure (space group P2/c) together with the conductivity of {sigma}{sub RT} = 0.03 S/cm and the Pauli-like magnetic susceptibility are best described by the resonating valence bond (RVB) model. The interchain interaction is unstable with respect to the formation of a {sigma}-charge density wave ({sigma}-CDW) involving pairs of C4 carbon atoms between adjacent radicals and this phase is characterized by the P2{sub 1}/c space group which involves a doubling of the unit cell along the [0 1 0] direction. The RVB and CDW phases compete for structural occupancy throughout the whole temperature range (15-293 K) with the RVB phase predominating at 15 and 293 K and the {sigma}-CDW phase achieving a maximum structural occupancy of about 60% at 150 K where it produces clearly discernible effects on the magnetism and conductivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Understanding the implications of the data from recent high-energy-density Kelvin-Helmholtz shear layer experiments

The first successful high energy density Kelvin-Helmholtz (KH) shear layer experiments (O.A. Hurricane, et al., Phys. Plasmas, 16, 056305, 2009; E.C. Harding, et al., Phys. Rev. Lett., 103, 045005, 2009) demonstrated the ability to design and field a target that produces an array of large diagnosable KH vortices in a controlled fashion. Data from these experiments vividly showed the complete evolution of large distinct eddies, from formation to apparent turbulent break-up. Unexpectedly, low-density bubbles/cavities comparable to the vortex size ({approx} 300 - 400 {micro}m) appeared to grow up in the free-stream flow above the unstable material interface. In this paper, the basic principles of the experiment will be discussed, the data reviewed, and the progress on understanding the origin of the above bubble structures through theory and simulation will be reported on.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

In-situ x-ray diffraction studies of host-guest properties in nanoporous zinc-triazolate-based framework materials.

Two nanoporous metal-organic framework materials incorporating the exotridentate bridging ligand 3-amino-1,2,4-triazolate (AmTAZ) have been synthesized through variation of secondary bridging anions: [Zn{sub 3}(AmTAZ){sub 3}S](NO{sub 3}) {center_dot} (H{sub 2}O) (1 {center_dot} (H{sub 2}O)) and Zn{sub 7}(AmTAZ){sub 8}(CO{sub 3}){sub 2}(OH){sub 2} {center_dot} 2(EtOH) (2 {center_dot} 2(EtOH); EtOH = ethanol). 1 {center_dot} (H{sub 2}O) crystallizes in the cubic space group I23 and is constructed from triangular Zn{sub 3}S units that are bridged through AmTAZ ligands into a cationic three-dimensional (3D) network with nitrate and water molecules residing in the cavities. 2 {center_dot} 2(EtOH) crystallizes in the monoclinic space group C2/c and shows a complex 3D network constructed from seven crystallographically unique zinc centers bridged by AmTAZ, carbonate, and hydroxide anions. The porous nature of both materials has been explored by thermogravimetric analysis, nitrogen sorption, and in situ synchrotron-based powder X-ray diffraction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Paralel Multiphysics Algorithms and Software for Computational Nuclear Engineering

There is a growing trend in nuclear reactor simulation to consider multiphysics problems. This can be seen in reactor analysis where analysts are interested in coupled flow, heat transfer and neutronics, and in fuel performance simulation where analysts are interested in thermomechanics with contact coupled to species transport and chemistry. These more ambitious simulations usually motivate some level of parallel computing. Many of the coupling efforts to date utilize simple 'code coupling' or first-order operator splitting, often referred to as loose coupling. While these approaches can produce answers, they usually leave questions of accuracy and stability unanswered. Additionally, the different physics often reside on separate grids which are coupled via simple interpolation, again leaving open questions of stability and accuracy. Utilizing state of the art mathematics and software development techniques we are deploying next generation tools for nuclear engineering applications. The Jacobian-free Newton-Krylov (JFNK) method combined with physics-based preconditioning provide the underlying mathematical structure for our tools. JFNK is understood to be a modern multiphysics algorithm, but we are also utilizing its unique properties as a scale bridging algorithm. To facilitate rapid development of multiphysics applications we have developed the Multiphysics Object-Oriented Simulation Environment (MOOSE). Examples from two MOOSE based applications: PRONGHORN, our multiphysics gas cooled reactor simulation tool and BISON, our multiphysics, multiscale fuel performance simulation tool will be presented.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Direct measurement of transient electric fields induced by ultrafast pulsed laser irradiation of silicon

We use 30 kV electron pulses to probe transient electric fields above silicon surfaces by pump-probe. Electron beam deflection at 0.29 mm away from the sample surface on the order of 10{sup -2} degrees is measured as a function of time delay and used to measure the local electric fields. The measured field strength and direction change with time; at the pump laser fluence of 67.7 mJ/cm{sup 2}, the maximum field reaches 34 kV/m. We model the transient electric fields based on the propagation of electrons emitted from the Si surface and the percentage of electrons escaping from the surface.

36 MATERIALS SCIENCE↗

Using a Microcapillary Refractive X-Ray Lens for Focusing And Imaging

The microcapillary lens, formed by air bubbles in a hollow core glass capillary filled with epoxy, is a novel design of a compound refractive lens for X-rays. The epoxy enclosed between two air bubbles has the form of a biconcave lens and acts as a positive lens for X-rays. Each individual lens is spherical with radius of curvature equal to the inner radius of the capillary. Up to 500 individual biconcave lenses can be formed in a single capillary with diameters from 50 to 500 {mu}m. Due to the small radius of curvatures that can be achieved, microcapillary lenses typically have shorter focal lengths than those made by compression or injection molding. For example, microcapillary lenses with a focal length about 5 cm for 8 keV X-rays and 50-micron aperture are readily available. We have produced a set of lenses in a 200-micron inner-diameter glass capillary with 100--350 individual microlenses and measured their parameters at the Stanford Synchrotron Radiation Laboratory and at the Advanced Photon Source. Our investigations have also shown that the lenses are suitable for imaging applications with an X-ray tube as a source of X-rays. A simple X-ray microscope is discussed. The microscope consists of a copper anode X-ray tube, X-ray lens and CCD-camera. The object, lens and CCD-camera were placed in-line at distances to satisfy the lens formula. It is shown that the field of view of the microscope is about 1 mm and resolution is equal to 3--5 {mu}m.

43 PARTICLE ACCELERATORS↗

Rayleigh-Taylor stabilization by material strength at Mbar pressures

Studies of solid-state material dynamics at high pressures ({approx}1 Mbar) and ultrahigh strain rates (>10{sup 6} s{sup -1}) are performed using a unique laser based, quasi-isentropic high-pressure acceleration platform. Vanadium foils with pre-imposed sinusoidal ripples are accelerated in the solid state with this ramped high pressure drive. This causes Rayleigh-Taylor (RT) instability growth at the interface, where the rate of growth is sensitive to the solid-state material properties. The RT growth history is measured by face-on radiography using synchronized laser-driven x-ray backlighters at the Omega Laser. The experimental results are compared with 2D hydrodynamics simulations utilizing constitutive models of high pressure material strength. We find that the vanadium strength increases by a factor of 3.5-4 at peak pressure, compared to its ambient (undriven) strength. Both pressure hardening and strain rate hardening are the suggested cause for this increase in strength. An analysis treating strength as an effective lattice viscosity finds that a viscosity of {approx}400 poise is required to reproduce our RT data.

42 ENGINEERING↗

The MERIT High-Power Target Experiment at the CERN PS

The MERIT experiment was designed as a proof-of-principle test of a target system based on a free mercury jet inside a 15-T solenoid that is capable of sustaining proton beam powers of up to 4 MW. The experiment was run at CERN in the fall of 2007. We describe the results of the tests and their implications.

43 PARTICLE ACCELERATORS↗

Time Structure of Particle Production in the MERIT High-Power Target Experiment

The MERIT experiment is a proof-of-principle test of a target system for high power proton beam to be used as front-end for a neutrino factory complex or amuon collider. The experiment took data in autumn 2007 with the fast extracted beam from the CERN Proton Synchrotron (PS) to a maximum intensity of about 30 x 10{sup 12} protons per pulse. We report results from the portion of the MERIT experiment in which separated beam pulses were delivered to a free mercury jet target with time intervals between pulses varying from 2 to 700 {micro}s. The analysis is based on the responses of particle detectors placed along side and downstream of the target.

43 PARTICLE ACCELERATORS↗

Progress towards materials science above 1000 GPa (10 Mbar) on the NIF laser

Solid state dynamics experiments at extreme pressures, P > 1000 GPa (10 Mbar), and ultrahigh strain rates (1.e6-1.e8 1/s) are being developed for the National Ignition Facility (NIF) laser. These experiments will open up exploration of new regimes of materials science at an order of magnitude higher pressures than have been possible to date. Such extreme, solid state conditions can be accessed with a ramped pressure drive. The experimental, computational, and theoretical techniques are being developed and tested on the Omega laser. Velocity interferometer measurements (VISAR) establish the high pressure conditions generated by the ramped drive. Constitutive models for solid state strength under these conditions are tested by comparing simulations with experiments measuring perturbation growth from the Rayleigh-Taylor instability in solid state samples of vanadium. Radiography techniques using synchronized bursts of x-rays have been developed to diagnose this perturbation growth. Experiments on Omega demonstrating these techniques at peak pressures of {approx}1 Mbar will be discussed. The time resolved observation of foil cracking and void formation show the need for tamped samples and a planar drive.

42 ENGINEERING↗

Purification, Crystallization and Preliminary X-ray Crystallographic Studies of RAIDD Death-Domain (DD)

Caspase-2 activation by formation of PIDDosome is critical for genotoxic stress induced apoptosis. PIDDosome is composed of three proteins, RAIDD, PIDD, and Caspase-2. RAIDD is an adaptor protein containing an N-terminal Caspase-Recruiting-Domain (CARD) and a C-terminal Death-Domain (DD). Its interactions with Caspase-2 and PIDD through CARD and DD respectively and formation of PIDDosome are important for the activation of Caspase-2. RAIDD DD cloned into pET26b vector was expressed in E. coli cells and purified by nickel affinity chromatography and gel filtration. Although it has been known that the most DDs are not soluble in physiological condition, RAIDD DD was soluble and interacts tightly with PIDD DD in physiological condition. The purified RAIDD DD alone has been crystallized. Crystals are trigonal and belong to space group P3121 (or its enantiomorph P3221) with unit-cell parameters a = 56.3, b = 56.3, c = 64.9 and ? = 120 degrees. The crystals were obtained at room temperature and diffracted to 2.0 A resolution.

59 BASIC BIOLOGICAL SCIENCES↗

Fifty C-terminal Amino Acid Residues are Necessary for the Chaperone Activity of DFF45 But not for the Inhibition of DFF40

Apoptotic DNA fragmentation, the hallmark of apoptosis, is mediated primarily by caspase-activated DFF40 (CAD) nuclease. DFF40 exists as a heterodimer with DFF45 (ICAD), which is a specific chaperone and inhibitor of DFF40 under normal conditions. To understand the mechanism through which the DFF40/DFF45 system is regulated, we analyzed the structural and biochemical properties of apoptotic DNA fragmentation mediated by DFF40/DFF45. Using limited proteolysis, we show that residues 1-281 of DFF45 form a rigid, crystallized domain, whereas the loop formed by residues 277-281 is accessible by trypsin. These results show that the C-terminal helix formed by residues 281-300 is dynamic and necessary for the chaperone activity of DFF45, but not for inhibition of DFF40.

59 BASIC BIOLOGICAL SCIENCES↗