Engineering Papers⌕ Search

Engineering topics

Papadopoulos, Evangelos

Publications and source records attributed to Papadopoulos, Evangelos.

On the nature of control algorithms for free-floating space manipulators

It is suggested that nearly any control algorithm that can be used for fixed-based manipulators also can be employed in the control of free-floating space manipulator systems, with the additional conditions of estimating or measuring a spacecraft's orientation and of avoiding dynamic singularities. This result is based on the structural similarities between the kinematic and dynamic equations for the same manipulator but with a fixed base. Barycenters are used to formulate the kinematic and dynamic equations of free-floating space manipulators. A control algorithm for a space manipulator system is designed to demonstrate the value of the analysis.

Papadopoulos, Evangelos↗

Failure recovery control for space robotic systems

The problem of controlling a failed joint of a space manipulator is addressed. It is shown that failure-recovery control is possible when dynamic coupling exists between the link whose joint has failed and some other link whose joint is working and when the system inertia matrix is invariant with respect to the failed joint angle. A failure-recovery control technique is developed and applied to two simple examples.

Papadopoulos, Evangelos↗

On the nature of control algorithms for space manipulators

A study of the characteristics of control algorithms that can be applied to the motion control of space manipulators is reported. The results obtained show that nearly any control algorithm that can be applied to conventional terrestrial fixed-base manipulators, with a few additional conditions, can be directly applied to free-floating space manipulators. Barycenters are used to formulate efficiently the kinematic and dynamic equations of free-floating space manipulators. A control algorithm for a space manipulator system is designed to demonstrate the value of the analysis.

Papadopoulos, Evangelos↗

A method for estimating the mass properties of a manipulator by measuring the reaction moments at its base

Emulating on earth the weightlessness of a manipulator floating in space requires knowledge of the manipulator's mass properties. A method for calculating these properties by measuring the reaction forces and moments at the base of the manipulator is described. A manipulator is mounted on a 6-DOF sensor, and the reaction forces and moments at its base are measured for different positions of the links as well as for different orientations of its base. A procedure is developed to calculate from these measurements some combinations of the mass properties. The mass properties identified are not sufficiently complete for computed torque and other dynamic control techniques, but do allow compensation for the gravitational load on the links, and for simulation of weightless conditions on a space emulator. The algorithm has been experimentally demonstrated on a PUMA 260 and used to measure the independent combinations of the 16 mass parameters of the base and three proximal links.

West, Harry↗