Engineering Papers⌕ Search

Engineering topics

Pan, Feng

Publications and source records attributed to Pan, Feng.

67 records · Page 4
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Enhanced long-term cyclability in Li-Rich layered oxides by electrochemically constructing a Li x TM 3-x O 4 -type spinel shell

The poor long-term cycling stability, including the fast capacity fade and the severe voltage decay, has become the main concern hindering the practical application of Li-rich layered oxides, a promising cathode for high- energy-density Li-ion battery. Herein, we design and electrochemically construct a ~10 nm-thick Li x TM 3-x O 4 - type (TM ¼Ni, Co, Mn, 0 3 O 4 -type spinel phase and the good Liþconductivity of LiMn 2 O 4 -type spinel phase. Systemic structural and electrochemical analysis demonstrate that, it slows down the activation rate of Li 2 MnO 3 component and efficiently alleviates the lattice O loss at high voltage (>4.5 V) and Mn dissolution, thereby suppressing the structural degradation from the layered phase to the spinel phase in the bulk, eventually significantly enhancing the long-term cycling stability. This study adds richness into the Mn-based spinel phase system and provides a new heterostructure design strategy to improve the electrochemical performance of Li-rich layered cathodes and beyond.

25 ENERGY STORAGE↗
DOE OSTI2020

A nomogram for prediction of stage III/IV gastric cancer outcome after surgery: A multicenter population‐based study

Abstract Most patients with gastric cancer (GC) are first diagnosed at stage III‐IV and surgery resection remains the primary therapeutic modality for these patients. However, clinical staging used for prediction of those patients provides limited information. We collected clinicopathological data and disease‐progression information from 508 patients with stage III‐IV GC at three Chinese hospitals and 1298 patients from the Surveillance, Epidemiology, and End Results database. Based on the stepwise multivariate regression model, we constructed a novel nomogram to predict overall survival (OS). The performance of discrimination for this model was measured using Harrell's concordance index (C‐index) and receiver‐operating characteristic curve (ROC), and was validated using calibration plots. Multivariate Cox regression analyses showed that tumor size, age at diagnosis, N stage, tumor grade, and distant metastases were outstanding independent prognostic factors of stage III‐IV GC. We developed a nomogram based on these five prognostic predictors. In the training set, the C‐index of the nomogram was 0.645 (95% CI: 0.611‐0.679), which was higher than that of the American Joint Committee on Cancer TNM system alone (sixth TNM: 0.544; seventh TNM: 0.575; eighth TNM: 0.568). Similar results were observed in validation cohort. Moreover, calibration blots demonstrated good consistency between the actual and predicted OS probabilities. According to the nomogram, GC individuals could be classified into three groups (low‐, middle‐, and high‐risk) ( P < .001). Our nomogram complements the current staging system for prediction of individual prognosis with stage III‐IV GC, and may be helpful for making individualized treatment decisions.

Gao, Zhiying↗
DOE OSTI2020

$\gamma$-Unstable Bohr Hamiltonian with sextic potential for odd-A nuclei

We report in this paper, odd-A nuclei in the vibrational to γ-soft transitional region are studied in the collective model, in which the odd-A system is described by the Bohr Hamiltonian with the quasi exactly solvable sextic β-part potential for the even-even core coupled with a single nucleon in a j = 3/2 orbit via the β-independent five-dimensional spin-orbit interaction and the total angular momentum degeneracy breaking term. To test the validity of the coupling scheme, we use the model to reproduce experimentally available level energies and B(E2) values of 187,189,191,193,195 Ir. It is clearly shown from both the level energies and the known B(E2) values for 191,193I r fitted that the model with the β-independent five-dimensional spin-orbit interaction and the total angular momentum degeneracy breaking term seems adequate to describe the low-lying level pattern and the structure of these odd-A nuclei.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Quantum phase crossover in the spherical mean-field plus quadrupole–quadrupole and pairing model with two j-orbits

The shape phase crossover in the mean-field plus the geometric quadrupole–quadrupole and pairing model within two [Formula: see text]-orbits is analyzed, for which a simple description of [Formula: see text]Sn confined in the lowest [Formula: see text] and [Formula: see text] orbits above the [Formula: see text]Sn core is demonstrated to reveal the crossover behavior of the model. It is shown that [Formula: see text], [Formula: see text] and [Formula: see text], [Formula: see text] in this case may serve as effective order parameters for even–even and odd-A systems, respectively, from which the shape phase crossover from the rotation-like phase to the superconducting-like phase can be observed with variation of the number of valence neutrons.

Physics↗
DOE OSTI2020

Negligible voltage hysteresis with strong anionic redox in conventional battery electrode

Lattice anionic (oxygen) redox reactions (ARR) offers opportunities for developing high-capacity batteries, however, often suffers the notoriously high hysteresis in voltages and low initial coulombic efficiency. Particularly, ARR was widely considered inherent to these kinetic issues. Here, unambiguous evidences of strong and reversible ARR is found in Na 2/3 Ni 1/3 Mn 2/3 O 2 through mapping of resonant inelastic X-ray scattering (mRIXS). Strikingly, the material displays negligible voltage hysteresis (0.1 V) and high initial coulombic efficiency with a highly stable electrochemical profile. Our independent analysis of the Ni, Mn and O states consistently interpret the redox mechanism of Na 2/3 Ni 1/3 Mn 2/3 O 2 , which reveals a strong ARR system with facile kinetics and highly stable electrochemical profile that previously found only in cationic redox systems of conventional non-Alkali-rich materials.

25 ENERGY STORAGE↗
DOE OSTI2020

Wannier–Koopmans method calculations for transition metal oxide band gaps

The widely used density functional theory (DFT) has a major drawback of underestimating the band gaps of materials. Wannier–Koopmans method (WKM) was recently developed for band gap calculations with accuracy on a par with more complicated methods. WKM has been tested for main group covalent semiconductors, alkali halides, 2D materials, and organic crystals. Here we apply the WKM to another interesting type of material system: the transition metal (TM) oxides. TM oxides can be classified as either with d 0 or d 10 closed shell occupancy or partially occupied open shell configuration, and the latter is known to be strongly correlated Mott insulators. We found that, while WKM provides adequate band gaps for the d0 and d10 TM oxides, it fails to provide correct band gaps for the group with partially occupied d states. This issue is also found in other mean-field approaches like the GW calculations. We believe that the problem comes from a strong interaction between the occupied and unoccupied d-state Wannier functions in a partially occupied d-state system. We also found that, for pseudopotential calculations including deep core levels, it is necessary to remove the electron densities of these deep core levels in the Hartree and exchange–correlation energy functional when calculating the WKM correction parameters for the d-state Wannier functions.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Full Energy Range Resonant Inelastic X-ray Scattering of O 2 and CO 2 : Direct Comparison with Oxygen Redox State in Batteries

The evolving oxygen state plays key roles in the performance and stability of high-energy batteries involving oxygen redox reactions. In this study, high-efficiency full energy range O -K mapping of resonant inelastic X-ray scattering (mRIXS) was collected from O 2 (O 0 ) and CO 2 (O 2– with strong covalency) molecules and compared directly with Li 2 O 2 (O – ) and the oxidized oxygen state in representative Na/Li-ion battery electrodes. Our results confirm again that the critical mRIXS feature around the 523.7 eV emission energy is from intrinsically oxidized oxygen, but not from the highly covalent oxygen state (CO 2 ). The comparison of the mRIXS profile of the four different oxygen states, i.e., O 2– , O – , O n – (0 < n < 2), and O 0 , reveals that oxygen redox states in batteries have distinct widths and positions along the excitation energy compared with Li 2 O 2 and O 2 . The nature of the oxidized oxygen state in oxide electrodes is thus beyond a simple molecular configuration of either peroxide or O 2 .

25 ENERGY STORAGE↗
DOE OSTI2020

Harnessing the surface structure to enable high-performance cathode materials for lithium-ion batteries

The ever-increasing demand for high-performance batteries have been driving the fundamental understanding of the crystal/surface structural and electrochemical properties of intercalation cathode materials, among which the olivine-type, spinel and layered lithium transition metal oxide materials have received particular attention in the past decade due to their successful commercialization. While the most current studies focus on the macroscopic and bulk crystal structure of these materials, our previous work suggests that, as a confined region where charge transfer takes place, the interfacial structures of cathode materials largely dictate their electrochemical performances due to the structural symmetry breaking from 3D (bulk) to 2D (surface), which leads to reconstructions under the different chemical/electrochemical conditions. By summarizing works in this subject and offering our perspectives, this tutorial review will reveal for the first time the correlation between surface structure and interface reconstruction at atomic/molecular scales and their direct impact on corresponding electrochemical performances. More importantly, by extending the knowledge obtained from these three well-studied system, we believe that the same principles established could universally apply to other cathode materials that have been the frontiers of new battery chemistries.

25 ENERGY STORAGE↗