Engineering Papers⌕ Search

Engineering topics

Painter, Gayle S

Publications and source records attributed to Painter, Gayle S.

Observations on the Influence of Secondary Me Oxides Additives (Me=Si,Al, Mg) on the Microstructural Evolution and Mechanical Behavior of Silicon Nitride Ceramics Containing RE2O3 (RE=La, Gd, Lu)

The evolution of β Si3N4 microstructures is influenced by the adsorption of rare earth elements at grain surfaces and by the viscosity of the intergranular phases. Theoretical and STEM studies show that the RE atoms exhibit different tendencies to segregate from the liquid phase to grain surfaces and different binding strengths at these surfaces. When combined with MgO (or Al2O3) secondary additions, the rare earth additives are combined in low viscosity intergranular phases during densification and the α to β phase transformation and microstructural evolution are dominated by the RE adsorption behavior. On the other hand, a much higher viscosity intergranular phase forms when the RE2O3 are combined with SiO2. While the rare earth adsorption behavior remains the same, the phase transformation and microstructure are now dominated by Si3N4 solubility and transport in the high liquid phase. By understanding these additive effects, one can develop reinforced microstructures leading silicon nitride ceramics with greatly improved mechanical behavior.

36 MATERIALS SCIENCE↗

First-principles study of rare earth adsorption at {beta}-Si{sub 3}N{sub 4} interfaces

Structural characterization of rare earth adsorption at surfaces or interfaces of {beta}-Si{sub 3}N{sub 4} grains within silicon nitride ceramics has recently been reported by three different groups using Z-contrast scanning transmission electron microscopy (STEM) imaging. Here we report the electronic structure basis for these observations and discuss the origin of similarities and differences among the lanthanides characterized in that work. Along with the features that are well described by a first-principles cluster and surface slab models, we identify those differences in the experiment and theory that warrant further investigation. Stereochemical bonding factors are found to determine adsorption site preferences as opposed to ionic size effects. The set of possible bond sites is a characteristic of the {beta}-Si{sub 3}N{sub 4} interface; however the strength of the rare earth-interface bonding is determined by the electronic structure of the nitride surface and the specific adsorbate. This is the principal factor controlling the effects of dopants on the {alpha}{yields}{beta} phase transformation and on the {beta}-Si{sub 3}N{sub 4} grain growth at high temperature as well as the subsequent microstructure of the ceramic.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effects of Rare Earth (RE) Intergranular Adsorption on the Phase Transformation and Microstructure Evolution in Silicon Nitride with RE2O3 + MgO Additives: Fracture Behavior

Silicon nitride powders consist primarily of the alpha phase, which transforms to the beta phase during the densification and microstructural evolution of Si3N4 ceramics. The temperature at which the transformation initiates in the presence of a combination of MgO and RE2O3 densification additives is found to decrease with increasing atomic number of the rare earth (RE). This trend coincides with the predicted and observed decrease in the affinity of the rare earth to segregate to and absorb on the prism planes of hexagonal prism shaped beta grains with increase in the atomic number of the RE. When RE adsorption is diminished, Si (and N) attachment on the smooth prism planes is enhanced, which increases diametrical growth rates, normally reaction-rate limited by an attachment mechanism. Combined with the typically fast [0001] growth, it is this augmented grain growth that contributes towards the initiation of the alpha-beta transformation at lower temperatures. With the enhanced transformation, observations reveal an increase in the number of beta grains growing in the early stages of densification. On the other hand, increased RE adsorption leads to greater growth anisotropy resulting in the formation of higher aspect ratio grains. Thus, Lu2O3 generates larger diameter, yet elongated, reinforcing grains, while La2O3 results in reinforcing grains of higher aspect ratio. The Gd2O3 additive transformation and microstructual characteristics lie intermediate to those of the lanthanide end member elements. Despite these differences, a substantial fraction of large reinforcing grains were found for each additive composition. As a result, the mechanical properties of the resultant ceramics are similar with flexure strengths in excess of 1 GPa, fracture toughness values greater than 10 MPa m1/2 at room temperature and excellent strength retention (>800 MPa) at 1200 C.

Becher, Paul F↗

Composition and local bonding in RE-Si-M-O-N (M = Mg, Al ; RE = La, Lu) glasses

Two series of oxynitride glasses, RE-Si-Mg-O-N (M = Mg, Al ; RE = La, Lu), have been studied by X-Ray photoelectron spectroscopy (XPS). The oxygen 1s photoelectron lineshape reveals a striking di erence depending on the rare earth, both in the Mg series and in the Al series. Actually, the oxygen 1s photoelectron lines of the La doped glasses are broader than the ones of the Lu doped glasses. This result is an experimental evidence that Lu has a larger a nity for oxygen versus nitrogen than La, as theoretically predicted by the ab initio calculations by Painter et al.

Fouquet, V↗

Experimental probe of adsorbate binding energies at internal crystalline/amorphous interfaces in Gd-doped Si{sub 3}N{sub 4}

Electron beam irradiation during scanning transmission electron microscopy has been used to probe the relative abundance and stabilities of gadolinium adsorption sites in polycrystalline silicon nitride ceramics. Site-specific binding strengths in the interface plane between {beta}-Si{sub 3}N{sub 4} grains and the adjacent amorphous triple pockets were found to be consistent with theoretical predictions. Decreasing stability was found for Gd within partially ordered planes further from the interface. Atomic level characterization such as that reported here provides detailed insights that will allow one to tailor new functional ceramic microstructures with improved macroscopic mechanical properties.

36 MATERIALS SCIENCE↗

An Embedded Cluster Self-Consistent Partial Wave Method using Divide and Conquer

An efficient approach to extending the spatial scale of electronic structure calculations is described in this work. The method is formulated as a combination of the interacting fragments concept of Harris [J. Harris, Phys. Rev. B 31, 1770 (1985)] and the D&C method of Yang [W. Yang, Phys. Rev. Lett. 66, 1438 (1991)], which recognizes the intrinsic locality of electron bonding and is devised to optimize the total electron charge density within an approximate representation of partitioned components. Beginning with a brief review of D&C concepts, we report results from this new method using the D&C as an embedding method for coupling an atomic cluster to its extended environment. The convergence properties as implemented within the self-consistent partial wave linear variational method (SCPW) are illustrated through various applications. In particular, results from a study of the adsorption of La atoms at the prism plane of -Si3N4 demonstrate the practicality of the SCPW using D&C as an embedding technique. PACS numbers: 71.15.Mb, 31.15.Ew, 31.50.Bc

Averill, Frank↗