Sustainable marine fuel production through mild hydrotreating of catalytic fast pyrolysis bio-oil
Not Available
09 BIOMASS FUELS↗
Engineering topics
Orton, Kellene A.
Publications and source records attributed to Orton, Kellene A..
Recovery of value-added compounds through fast pyrolysis of apple pomace hydrochar
The environmental challenges associated with food production can be addressed via the thermochemical upcycling of agro-industrial biomass. Two such methods, hydrothermal carbonization (HTC) and pyrolysis, can be coupled to first reduce the water content of wet biomass wastes by producing a hydrochar (HC) via HTC and then a bio-oil via pyrolysis of the HC. However, HTC of biomass results in the formation of secondary char (SC), an amorphous tar-like mixture resulting from organic compounds released into the aqueous phase that adsorb, recondense and polymerize on the parent biomass. This study investigated how HTC temperature impacts the formation of SC from apple pomace and the SC’s subsequent impact on fast pyrolysis products. HCs were produced at temperatures of 175°C, 200°C, and 250°C. Lower HTC temperatures favor the formation of biorefinery platform chemicals such as 5-hydroxymethylfurfural and levulinic acid, while higher temperatures result in increased lignin degradation products (i.e., phenolics). HCs were subjected to fast pyrolysis before and after SC extraction in two analytical pyrolysis instruments. Fast pyrolysis of HC produced compounds similar to those found in SC, but with variations in CO and CO 2 emissions. In conclusion, the combination of SC extraction and fast pyrolysis demonstrates promise for recovering value-added compounds from agro-industrial waste biomass while retaining a solid char for fuel and carbon management.
09 BIOMASS FUELS↗
Cycloalkane-rich sustainable aviation fuel production via hydrotreating lignocellulosic biomass-derived catalytic fast pyrolysis oils
Sustainable aviation fuel (SAF) produced from lignocellulosic biomass is emerging as an ideal alternative to conventional jet fuel for aviation sector decarbonization. Catalytic fast pyrolysis (CFP) can convert lignocellulosic biomass into relatively stable bio-oil that can be selectively transformed to various transportation fuels through hydroprocessing under conditions of different severities. In this contribution, two CFP oils produced from pine-based feedstocks over different types of catalysts (i.e., ZSM-5 and Pt/TiO 2 catalysts) were hydrotreated at 125 bar in a non-isothermal process with a maximum temperature of 385 °C over a sulfided NiMo/Al 2 O 3 catalyst to produce SAF with high cycloalkane concentrations of 89–92 wt%. Cycloalkanes are an important component of jet fuel with advantageous fuel properties, such as high energy density, low sooting, and potential for replacing aromatic hydrocarbons to provide good seal swelling properties. The hydrotreating process successfully converted 91–92% of the biogenic carbon in the CFP oil intermediates to liquid-phase hydrotreated products. Through distillation, 39–40 wt% of the hydrotreated oils were collected in the jet-fuel range as SAF fractions. The rest of the hydrotreated product could be valorized as fuels (e.g., diesel) or chemicals. The SAF fractions with oxygen contents below the detection limit (<0.01 wt%) met ASTM D7566 finished fuel blend and D4054 Tier 1 specifications with respect to density, lower heating value (LHV), volatility, flash point, and freeze point. These results indicate hydrotreating lignocellulosic biomass-derived CFP oil as a promising pathway to produce high-quality SAF rich in cycloalkanes. Continued research is required to increase the SAF yield by process improvements, such as increased CFP oil yields, and an enhanced production of SAF-range molecules via e.g., cracking of high-molecular weight compounds either during CFP or hydrotreating, as well as evaluation of a broader range of jet fuel properties and performance requirements.
09 BIOMASS FUELS↗
Synthesis, performance evaluation, and economic assessment of tailored Pt/TiO 2 catalysts for selective biomass vapour upgrading via a scalable flame spray pyrolysis route
Flame-spray pyrolysis offers a scalable approach to the synthesis of tailored nanostructured catalysts for biomass conversion.
09 BIOMASS FUELS↗
Accelerating Catalyst Development for Biofuel Production through Multiscale Catalytic Fast Pyrolysis of Biomass over Mo2C
Advanced catalytic materials play an enabling role in producing renewable fuels and chemicals from biomass, thereby helping meet the global climate-change goals set forth by the Intergovernmental Panel on Climate Change. Herein, we present a multiscale approach to accelerate the catalyst-process development cycle for catalytic fast pyrolysis (CFP) of biomass over Mo2C. Mo2C has been shown to possess co-localized acidic and metallic sites and exhibit high activity for deoxygenation of biomass pyrolysis model compounds. However, critical knowledge gaps remain regarding the effectiveness of this catalyst for CFP of whole biomass. We address these knowledge gaps and demonstrate that Mo2C is effective at deoxygenating biomass-pyrolysis products in the presence of H2 but that it undergoes rapid selective and non-selective deactivation. The knowledge gaps addressed from this integrated study, targeting appropriate experiments across scales and feed types, enabled identification of critical modifications for advancing the CFP catalyst-process development cycle.
biofuels↗