Engineering Papers⌕ Search

Engineering topics

Oral, Sarp

Publications and source records attributed to Oral, Sarp.

68 records · Page 4

Optimizing checkpoint data placement with guaranteed burst buffer endurance in large-scale hierarchical storage systems

Non-volatile devices, such as SSDs, will be an integral part of the deepening storage hierarchy on large-scale HPC systems. These devices can be on the compute nodes as part of a distributed burst buffer service or they can be external. Wherever they are located in the hierarchy, one critical design issue is the SSD endurance under the write-heavy workloads, such as the checkpoint I/O for scientific applications. For these environments, it is widely assumed that checkpoint operations can occur once every 60 min and for each checkpoint step as much as half of the system memory can be written out. Unfortunately, for large-scale HPC applications, the burst buffer SSDs can be worn out much more quickly given the extensive amount of data written at every checkpoint step. One possible solution is to control the amount of data written by reducing the checkpoint frequency. However, a direct effect caused by reduced checkpoint frequency is the increased vulnerability window of system failures and therefore potentially wasted computation time, especially for large-scale compute jobs.

Computer Science↗

Data Movement in Data-Intensive High Performance Computing.

The cost of executing a floating point operation has been decreasing for decades at a much higher rate than that of moving data. Bandwidth and latency, two key metrics that determine the cost of moving data, have degraded significantly relative to processor cycle time and execution rate. Despite the limitation of sub-micron processor technology and the end of Dennard scaling, this trend will continue in the short-term making data movement a performance-limiting factor and an energy/power efficiency concern. Even more so in the context of large-scale and data-intensive systems and workloads. This chapter gives an overview of the aspects of moving data across a system, from the storage system to the computing system down to the node and processor level, with case study and contributions from researchers at the San Diego Supercomputer Center, the Oak Ridge National Laboratory, the Pacific Northwest National Laboratory, and the University of Delaware.

Data Movement↗

Lustre Distributed Name Space (DNE) Evaluation at the Oak Ridge Leadership Computing Facility (OLCF)

This document describes the Lustre Distributed Name Space (DNE) evaluation carried at the Oak Ridge Leadership Computing Facility (OLCF) between 2014 and 2015. DNE is a development project funded by the OpenSFS, to improve Lustre metadata performance and scalability. The development effort has been split into two parts, the first part (DNE P1) providing support for remote directories over remote Lustre Metadata Server (MDS) nodes and Metadata Target (MDT) devices, while the second phase (DNE P2) addressed split directories over multiple remote MDS nodes and MDT devices. The OLCF have been actively evaluating the performance, reliability, and the functionality of both DNE phases. For these tests, internal OLCF testbed were used. Results are promising and OLCF is planning on a full DNE deployment by mid-2016 timeframe on production systems.

97 MATHEMATICS AND COMPUTING↗

FCP: A Fast and Scalable Data Copy Tool for High Performance Parallel File Systems

The design of HPC file and storage systems has largely been driven by the requirements on capability, reliability, and capacity. However, the convergence of large-scale simulations with big data analytics have put the data, its usability, and management back on the front and center position. One of the most common and time consuming data management tasks is the transfer of very large datasets within and across file systems.In this paper, we are introducing the FCP tool, a file system agnostic copy tool designed at the OLCF for scalable and high-performance data transfers between two file system endpoints. It provides an array of interesting features such as adaptive chunking, checksumming on the fly, checkpoint and resume capabilities to handle failures, and preserving stripe information for Lustre file system among others. It is currently available on the Titan supercomputer at the OLCF. Initial tests have shown that FCP has much better and scalable performance than traditional data copy tools and it was capable of transferring petabyte-scale datasets between two Lustre file systems.

Wang, Feiyi↗

TRIO: Burst Buffer Based I/O Orchestration, In: 2015 IEEE International Conference on Cluster Computing

The growing computing power on leadership HPC systems is often accompanied by ever-escalating failure rates. Checkpointing is a common defensive mechanism used by scientific applications for failure recovery. However, directly writing the large and bursty checkpointing dataset to parallel file systems can incur significant I/O contention on storage servers. Such contention in turn degrades bandwidth utilization of storage servers and prolongs the average job I/O time of concurrent applications. Recently burst buffers have been proposed as an intermediate layer to absorb the bursty I/O traffic from compute nodes to storage backend. But an I/O orchestration mechanism is still desirable to efficiently move checkpointing data from burst buffers to storage backend. In this paper, we propose a burst buffer based I/O orchestration framework, named TRIO, to intercept and reshape the bursty writes for better sequential write traffic to storage servers. Meanwhile, TRIO coordinates the flushing orders among concurrent burst buffers to alleviate the contention on storage server. Our experimental results demonstrated that TRIO could efficiently utilize storage bandwidth and reduce the average job I/O time by 37% on average for data-intensive applications in typical checkpointing scenarios.

Computer Science↗

A practical approach to reconciling availability, performance, and capacity in provisioning extreme-scale storage systems

The increasing data demands from high-performance computing applications significantly accelerate the capacity, capability and reliability requirements of storage systems. As systems scale, component failures and repair times increase, significantly impacting data availability. A wide array of decision points must be balanced in designing such systems. We propose a systematic approach that balances and optimizes both initial and continuous spare provisioning based on a detailed investigation of the anatomy and field failure data analysis of extreme-scale storage systems. We consider the component failure characteristics and its cost and impact at the system level simultaneously. We build a tool to evaluate different provisioning schemes, and the results demonstrate that our optimized provisioning can reduce the duration of data unavailability by as much as 52% under a fixed budget. We also observe that non-disk components have much higher failure rates than disks, and warrant careful considerations in the overall provisioning process.

Computer Science↗

Comparative I/O workload characterization of two leadership class storage clusters. In: PDSW '15 Proceedings of the 10th Parallel Data Storage Workshop

The Oak Ridge Leadership Computing Facility (OLCF) is a leader in large-scale parallel file system development, design, deployment and continuous operation. For the last decade, the OLCF has designed and deployed two large center-wide parallel file systems. The first instantiation, Spider 1, served the Jaguar supercomputer and its predecessor, Spider 2, now serves the Titan supercomputer, among many other OLCF computational resources. The OLCF has been rigorously collecting file and storage system statistics from these Spider systems since their transition to production state. In this paper we present the collected I/O workload statistics from the Spider 2 system and compare it to the Spider 1 data. Our analysis show that the Spider 2 workload is more more write-heavy I/O compared to Spider 1 (75% vs. 60%, respectively). The data also show the OLCF storage policies such as periodic purges are effectively managing the capacity resource of Spider 2. Furthermore, due to improvements in tdm_multipath and ib_srp software, we are utilizing the Spider 2 system bandwidth and latency resources more effectively. The Spider 2 bandwidth usage statistics shows that our system is working within the design specifications. However, it is also evident that our scientific applications can be more effectively served by a burst buffer storage layer. All the data has been collected by monitoring tools developed for the Spider ecosystem. We believe the observed data set and insights will help us better design the next-generation Spider file and storage system. It will also be helpful to the larger community for building more effective large-scale file and storage systems.

Gunasekaran, Raghul↗

Improving large-scale storage system performance via topology-aware and balanced data placement

With the advent of big data, the I/O subsystems of large-scale compute clusters are becoming a center of focus. More applications are putting greater demands on end-to-end I/O performance. These subsystems are often complex in design. They comprise of multiple hardware and software layers to cope with the increasing capacity, capability, and scalability requirements of data intensive applications. However, the sharing nature of storage resources and the intrinsic interactions across these layers make it a great challenge to realize end-to-end performance gains. This paper proposes a topology-aware strategy to balance the load across resources, to improve the per-application I/O performance. We demonstrate the effectiveness of our algorithm on an extreme-scale compute cluster, Titan, at the Oak Ridge Leadership Computing Facility (OLCF). Our experiments with both synthetic benchmarks and a real-world application show that, even under congestion, our proposed algorithm can improve large-scale application I/O performance significantly, resulting in both a reduction in application run time as well as a higher resolution of simulation run.

Wang, Feiyi↗

Best Practices and Lessons Learned from Deploying and Operating Large-Scale Data-Centric Parallel File Systems, In: SC '14: Proceedings of the International Conference for High Performance Computing, Networking, Storage and Analysis

The Oak Ridge Leadership Computing Facility (OLCF) has deployed multiple large-scale parallel file systems (PFS) to support its operations. During this process, OLCF acquired significant expertise in large-scale storage system design, file system software development, technology evaluation, benchmarking, procurement, deployment, and operational practices. Based on the lessons learned from each new PFS deployment, OLCF improved its operating procedures, and strategies. This paper provides an account of our experience and lessons learned in acquiring, deploying, and operating large-scale parallel file systems. We believe that these lessons will be useful to the wider HPC community.

Computer Science↗

BurstMem: A high-performance burst buffer system for scientific applications

The growth of computing power on large-scale systems requires commensurate high-bandwidth I/O systems. Many parallel file systems are designed to provide fast sustainable I/O in response to applications' soaring requirements. To meet this need, a novel system is imperative to temporarily buffer the bursty I/O and gradually flush datasets to long-term parallel file systems. In this paper, we introduce the design of BurstMem, a high-performance burst buffer system. BurstMem provides a storage framework with efficient storage and communication management strategies. Our experiments demonstrate that BurstMem is able to speed up the I/O performance of scientific applications by up to 8.5× on leadership computer systems.

Wang, Teng↗

SSD-optimized workload placement with adaptive learning and classification in HPC environments

In recent years, non-volatile memory devices such as SSD drives have emerged as a viable storage solution due to their increasing capacity and decreasing cost. Due to the unique capability and capacity requirements in large scale HPC (High Performance Computing) storage environment, a hybrid configuration (SSD and HDD) may represent one of the most available and balanced solutions considering the cost and performance. Under this setting, effective data placement as well as movement with controlled overhead become a pressing challenge. In this paper, we propose an integrated object placement and movement framework and adaptive learning algorithms to address these issues. Specifically, we present a method that shuffle data objects across storage tiers to optimize the data access performance. The method also integrates an adaptive learning algorithm where realtime classification is employed to predict the popularity of data object accesses, so that they can be placed on, or migrate between SSD or HDD drives in the most efficient manner. We discuss preliminary results based on this approach using a simulator we developed to show that the proposed methods can dynamically adapt storage placements and access pattern as workloads evolve to achieve the best system level performance such as throughput.

Wan, Lipeng↗

Coordinating Garbage Collectionfor Arrays of Solid-State Drives

The primary goal of the extreme-scale plasma turbulence studies described in this article is to gain new insights on confinement scaling in magnetic fusion systems by using powerful, world-class supercomputers to carry out simulations with unprecedented resolution and temporal duration. New insights have been gained on the key question of how the turbulent transport of thermal energy and particles in the plasma and the associated confinement scale from present-generation devices to much larger ITER-size plasmas. In particular, new results from large-scale simulation studies have demonstrated that improvement in confinement as devices grow larger is far more gradual, with significantly lower loss rates than less-powerful computer simulations have indicated in research carried out over the past decade.

Computer Science↗

Preemptible I/O Scheduling of Garbage Collection for Solid State Drives

Unlike hard disks, flash devices use out-of-place updates operations and require a garbage collection (GC) process to reclaim invalid pages to create free blocks. This GC process is a major cause of performance degradation when running concurrently with other I/O operations as internal bandwidth is consumed to reclaim these invalid pages. The invocation of the GC process is generally governed by a low watermark on free blocks and other internal device metrics that different workloads meet at different intervals. This results in an I/O performance that is highly dependent on workload characteristics. In this paper, we examine the GC process and propose a semipreemptible GC (PGC) scheme that allows GC processing to be preempted while pending I/O requests in the queue are serviced. Moreover, we further enhance flash performance by pipelining internal GC operations and merge them with pending I/O requests whenever possible. Our experimental evaluation of this semi-PGC scheme with realistic workloads demonstrates both improved performance and reduced performance variability. Write-dominant workloads show up to a 66.56% improvement in average response time with a 83.30% reduced variance in response time compared to the non-PGC scheme. In addition, we explore opportunities of a new NAND flash device that supports suspend/resume commands for read, write, and erase operations for fully PGC (F-PGC). Our experiments with an F-PGC enabled flash device show that request response time can be improved by up to 14.57% compared to semi-PGC.

97 MATHEMATICS AND COMPUTING↗

Performance and scalability evaluation of the Ceph parallel file system. In: PDSW '13 Proceedings of the 8th Parallel Data Storage Workshop

Ceph is an emerging open-source parallel distributed file and storage system. By design, Ceph leverages unreliable commodity storage and network hardware, and provides reliability and fault-tolerance via controlled object placement and data replication. This paper presents our file and block I/O performance and scalability evaluation of Ceph for scientific high-performance computing (HPC) environments. Our work makes two unique contributions. First, our evaluation is performed under a realistic setup for a large-scale capability HPC environment using a commercial high-end storage system. Second, our path of investigation, tuning efforts, and findings made direct contributions to Ceph's development and improved code quality, scalability, and performance. These changes should benefit both Ceph and the HPC community at large.

Wang, Feiyi↗