Engineering Papers⌕ Search

Engineering topics

Okamoto, Koichi

Publications and source records attributed to Okamoto, Koichi.

Silver nanoparticles with tunable work functions

To improve the efficiencies of electronic devices, materials with variable work functions are required to decrease the energy level differences at the interfaces between working layers. Here, we report a method to obtain silver nanoparticles with tunable work functions, which have the same silver core of 5 nm in diameter and are capped by myristates and 1-octanethoilates self-assembled monolayers, respectively. The silver nanoparticles capped by organic molecules can form a uniform two-dimensional sheet at air-water interface, and the sheet can be transferred on various hydrophobic substrates. The surface potential of the two-dimensional nanoparticle sheet was measured in terms of Kelvin probe force microscopy, and the work function of the sheet was then calculated from the surface potential value by comparing with a reference material. The exchange of the capping molecules results in a work function change of approximately 150–250 meV without affecting their hydrophobicity. We systematically discussed the origin of the work function difference and found it should come mainly from the anchor groups of the ligand molecules. The organic molecule capped nanoparticles with tunable work functions have a potential for the applications in organic electronic devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Highly enhanced green emission from InGaN quantum wells due to surface plasmon resonance on aluminum films

Photoluminescence (PL) from InGaN/GaN quantum wells was highly enhanced by the surface plasmon (SP) resonance on aluminum thin films. The enhancement ratio of green emission reached 80, which was much larger than the previously reported enhancements on silver films. The resulting large enhancement should be attributed to an ∼20-fold enhancement of the excitation efficiency and ∼4-fold enhancement of the emission efficiency by the excitation and emission spectra. The temperature dependence of the PL intensities and the time-resolved PL measurements were also performed to understand the detailed mechanism. We concluded that the resonance between the excitation light and the SP on the Al surface should improve the excitation efficiency, i.e., the light absorption efficiency. This result suggests that the Al films have an extraordinary photon confinement effect, which are unique properties of plasmonics with Al and should be useful for new and wider applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Quantification of the internal quantum efficiency in GaN via analysis of the heat generated by non-radiative recombination processes

The internal quantum efficiency (IQE) in a GaN epilayer is quantified using transient lens (TL) spectroscopy and numerical simulations. TL spectroscopy can optically detect temperature and carrier changes induced in a photo-pumped GaN layer, and the observed temperature change is closely associated with non-radiative recombination processes that create heat. Then numerically solving diffusion equations, which represent the diffusion processes of the photo-generated heat and carriers, provide the spatiotemporal distributions. These distributions are subsequently converted into the refractive index distributions, which act as transient convex or concave lenses. Finally, ray-tracing simulations predict the TL signals. Comparing the experimentally obtained and simulated TL signals quantifies the generated heat and the IQE without the often-adopted assumption that non-radiative recombination processes are negligible at low temperatures.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Highly confined, enhanced surface fluorescence imaging with two-dimensional silver nanoparticle sheets

A method of obtaining highly confined, enhanced surface fluorescence imaging is proposed using two-dimensional (2D) silver nanoparticle (AgMy) sheets. This technique is based on the localized surface plasmon resonance excited homogeneously on a 2D silver nanoparticle sheet. The AgMy sheets are fabricated at the air–water interface by self-assembly and transferred onto hydrophobic glass substrates. These sheets can enhance the fluorescence only when the excitation wavelength overlaps with the plasmon resonance wavelength. To confirm the validity of this technique, two separate test experiments are performed. One is the epifluorescence microscope imaging of a quantum dot 2D sheet on the AgMy 2D sheet with a SiO{sub 2} spacer layer, where the fluorescence is maximized with the 20 nm SiO{sub 2} layer, determined by the Förster resonance energy transfer distances. The second experiment is the imaging of a single fluorescence bead with a total internal reflection fluorescent microscope. We confirmed that the AgMy sheet provides a 4-fold increase in fluorescence with a 160-nm spatial resolution at 30 ms/frame snapshot. The AgMy sheet will be a powerful tool for high sensitivity and high-resolution real time bioimaging at nanointerfaces.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Fabrication of micro-hollow fiber by electrospinning process in near-critical carbon dioxide

Electrospinning is a simple technique that has gained much attention because of its capability and feasibility in the fabrication of large quantities of fibers from polymer with diameters ranging in nano-microscale. These fibers provided high surface area to volume ratios, and it was of considerable interest for many applications, such as nanoparticle carriers in controlled release, scaffolds in tissue engineering, wound dressings, military wear with chemical and biological toxin-resistance, nanofibrous membranes or filters, and electronic sensors. Recently there has been a great deal of progress in the potential applications of hollow fibers in microfluids, photonics, and energy storage. In this work, electrospinning was conducted under high-pressure carbon dioxide (CO{sub 2}) to reduce the viscosity of polymer solution. The experiments were conducted at 313 K and ∼8.0 MPa. Polymer solution containing 5 wt% polymers which prepared in dichloromethane (DCM) with polyvinylpyrrolidone (PVP) to poly-L-lactic acid (PLLA) ratio 80:20 was used as a feed solution. The applied voltage was 15 kV and the distance of nozzle and collector was 8 cm. The morphology and structure of the fibers produced were observed using scanning electron microscopy (SEM). Under pressurized CO{sub 2}, PVP electrospun was produced without bead formation with diameter ranges of 608.50 - 7943.19 nm. These behaviors hold the potential to considerably improve devolatilization electrospinning processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗