NASA's ASPIRE (Advanced Supersonic Parachute Inflation Research Experiments) project was launched to investigate the supersonic deployment, inflation and aerodynamics of full-scale disk-gap-band (DGB) parachutes. Three flight tests (October 2017, March 2018 and July 2018) deployed and examined parachutes meant for the upcoming "Mars 2020" mission. Mars-relevant conditions were achieved by performing the tests at high altitudes over Earth on a sounding rocket platform, with the parachute deploying behind a slender body (roughly 1/6-th the diameter of the capsule that will use this parachute for descent at Mars). All three tests were successful and delivered valuable data and imagery on parachute deployment and performance. CFD simulations were used in designing the flight test, interpreting the flight data, and extrapolating the results obtained during the flight test to predict parachute behavior at Mars behind a blunt capsule. This presentation will provide a brief overview of the test program and flight test data, with emphasis on differences in parachute performance due to the leading body geometry.

Muppidi, Suman↗

NASA NTRS2019

ASPIRE Aerodynamic Models and Flight Performance

The Advanced Supersonic Parachute Inflation Research Experiments (ASPIRE) project waslaunched to develop the capability for testing supersonic parachutes at Mars-relevant conditions.Three initial parachute tests, targeted as a risk-reduction activity for NASA's upcoming Mars2020 mission, successfully tested two candidate parachute designs and provided valuable data onparachute inflation, forces, and aerodynamic behavior. Design of the flight tests depended onflight mechanics simulations which in turn required aerodynamic models for the payload, andthe parachute. Computational Fluid Dynamics (CFD) was used to generate these models preflightand they are compared against the flight data after the tests. For the payload, thereconstructed aerodynamic behavior is close to the pre-flight predictions, but the uncertaintiesin the reconstructed data are high due to the low dynamic pressures and accelerations duringthe flight period of comparison. For the parachute, the predicted time to inflation agrees wellwith the pre-flight model; the peak aerodynamic force and the steady state drag on the parachuteare within the bounds of the pre-flight models, even as the models over-predict the parachutedrag at supersonic Mach numbers. Notably, the flight data do not show the transonic dragdecrease predicted by the pre-flight model. The ASPIRE flight tests provide previouslyunavailable valuable data on the performance of a large full-scale parachute behind a slenderleading body at Mars-relevant Mach number, dynamic pressure and parachute loads. TheASPIRE results are used to propose a new model for the parachute drag behind slender bodiesto aid future experiments.

Muppidi, Suman↗

NASA NTRS2019

ASPIRE Aerodynamic Models and Flight Performance

The Advanced Supersonic Parachute Inflation Research Experiments (ASPIRE) project waslaunched to develop the capability for testing supersonic parachutes at Mars-relevant conditions.Three initial parachute tests, targeted as a risk-reduction activity for NASA's upcomingMars2020 mission, successfully tested two candidate parachute designs and provided valuabledata on parachute inflation, forces, and aerodynamic behavior. Design of the flight tests dependedon flight mechanics simulations which in turn required aerodynamic models for the payload, andthe parachute. Computational Fluid Dynamics (CFD) was used to generate these models preflightand are compared against the flight data after the tests. For the payload, the reconstructedaerodynamic behavior is close to the pre-flight predictions, but the uncertainties in thereconstructed data are high due to the low dynamic pressures and accelerations during the flightperiod of comparison. For the parachute, the predicted time to inflation agrees well with the preflightmodel; the peak aerodynamic force and the steady state drag on the parachute are withinthe bounds of the pre-flight models, even as the models over-predict the parachute drag atsupersonic Mach numbers. Notably, the flight data does not show the transonic drag decreasepredicted by the pre-flight model. The ASPIRE flight tests provide previously unavailablevaluable data on the performance of a large full-scale parachute behind a slender leading bodyat Mars-relevant Mach number, dynamic pressure and parachute loads. This data is used topropose a new model for the parachute drag behind slender bodies to aid future experiments.

Muppidi, Suman↗

NASA NTRS2019

Reconstruction of the Advanced Supersonic Parachute Inflation Research Experiment Sounding Rocket Flight Tests with Strengthened Disk-Gap-Band Parachute

The Advanced Supersonic Parachute Inflation Research and Experiments project is a flight test program for development of supersonic parachutes for future use at Mars. The flight tests are a risk-reduction program for the Mars 2020 mission. The flight tests involve two Disk-Gap- Band parachute designs to be tested at relevant Mach number and dynamic pressure regimes for the Mars 2020 entry capsule. The first of these parachutes is a built-to-print design that was successfully employed by the Mars Science Laboratory lander at Mars in August 2012, and the second is a design that is strengthened in material properties and construction methods but has the same geometry as that used by Mars Science Laboratory. The first flight test of the built-to-print parachute took place on October 4, 2017 at NASA's Wallops Flight Facility. The parachute test was successful. The second and third flight tests took place on March 31st and September 7th 2018, respectively, and successfully tested the strengthened parachute design. This paper describes the instrumentation, data analysis techniques, and atmospheric and trajectory reconstruction results from the second and third flight tests.

Karlgaard, Christopher D.↗

NASA NTRS2018

Performance of Supersonic Parachutes behind Slender Bodies

NASA's ASPIRE (Advanced Supersonic Parachute Inflation ResearchExperiments) project is investigating the supersonic deployment, inflation andaerodynamics of full-scale disk-gap-band (DGB) parachutes. The first two flight tests werecarried out in October 2017 and March 2018, while a third test is planned for the fall of 2018. Inthese tests, Mars-relevant conditions are achieved by deploying the parachutes at high altitudesover Earth using a sounding rocket test platform. As a result, the parachute is deployed behind aslender body (roughly 1/6-th the diameter of the capsule that will use this parachute for descentat Mars). Because there is limited flight and experimental data for supersonic DGBs behindslender bodies, the development of the parachute aerodynamic models was informed by CFDsimulations of both the leading body wake and the parachute canopy. This presentation willdescribe the development of the pre-flight parachute aerodynamic models and compare preflightpredictions with the reconstructed performance of the parachute during the flight tests.Specific attention will be paid to the differences in parachute performance behind blunt andslender bodies.

Muppidi, Suman↗

NASA NTRS2018

Performance of Supersonic Parachutes Behind Slender Bodies

NASA’s ASPIRE (Advanced Supersonic Parachute Inflation Research Experiments) project is investigating the supersonic deployment, inflation and aerodynamics of full-scale disk-gap-band (DGB) parachutes. The first two flight tests were carried out in October 2017 and March 2018, while a third test is planned for the fall of 2018. In these tests, Mars-relevant conditions are achieved by deploying the parachutes at high altitudes over Earth using a sounding rocket test platform. As a result, the parachute is deployed behind a slender body (roughly 1/6-th the diameter of the capsule that will use this parachute for descent at Mars). Because there is limited flight and experimental data for supersonic DGBs behind slender bodies, the development of the parachute aerodynamic models was informed by CFD simulations of both the leading body wake and the parachute canopy. This presentation will describe the development of the pre-flight parachute aerodynamic models and compare pre-flight predictions with the reconstructed performance of the parachute during the flight tests. Specific attention will be paid to the differences in parachute performance behind blunt and slender bodies.

CFD↗

NASA NTRS2018

Modeling the Aerodynamics of Supersonic Parachutes for Mars Applications

UNKNOWN

O'Farrell, Clara↗

NASA NTRS2018

Modeling and Flight Performance of Supersonic Disk-Gap-Band Parachutes in Slender Body Wakes

NASA's ASPIRE (Advanced Supersonic Parachute Inflation Research and Experiments) project is investigating the supersonic deployment and inflation of full-scale parachutes. To achieve Mars-relevant conditions, the parachutes are deployed at high altitudes over Earth on a sounding rocket platform. During the flight test, Disk-Gap-Band parachutes of 21.5 meter diameter are deployed behind a slender payload 1/6th the diameter of the blunt Mars2020 capsule. Due to the differences in leading body geometry between the test flight and a parachute deployment at Mars, high fidelity numerical simulations of slender and blunt bodywakes, and of rigid parachutes behind them, were used to understand differences and similarities in the flow and the effect on parachute drag. The slender body wake is thinner, closes earlier, and presents a smaller wake deficit. Thus, a parachute deployed in the wake of a slender body is more likely to see a higher dynamic pressure than a parachute deployed behind a blunt body. In the presence of a parachute, the interaction of the unsteady wake with the parachute bow shock is stronger behind the blunt body. Simulations yield highly unsteady forces on the parachute, which was modeled as a rigid body. The mean parachute force behind a slender body is between 3 and 12 percent higher than behind a blunt body, depending on the angle of the parachute with the flow. As the angle of incidence increases, more of the parachute moves out of the leading body wakes, decreasing the sensitivity to leading body shape. To compare the flow past parachutes in Earth's and Mars' atmospheres, simulations were also performed in CO2. At the Mach number considered (1.75), the shock standoff distance ahead of the parachute, post-shock jump conditions, and the resulting parachute forces were found to be very similar in both air and CO2, indicating that a high altitude test is a good proxy for a Mars descent. The results of these numerical simulations and available data on past flight and wind tunnel tests of supersonic Disk-Gap-Band parachutes behind slender bodies were used to generate a parachute drag model for ASPIRE, which in turn was used to help design the flight test. The first flight test occurred in October 2017. The parachute was successfully deployed at Mach 1.77 and an altitude of 42 kilometers. Test instrumentation provided the atmospheric conditions, test vehicle trajectory, and the loads on the parachute along with detailed high-resolution imagery of the inflation process. Reconstruction of the flight test indicated that the measured forces on the parachute were within the model's bounds, although the model over-predicted the parachute force during the first few seconds. The parachute forces during the long subsonic period were well-predicted by the ASPIRE drag model.

Muppidi, Suman↗

NASA NTRS2018

Reconstruction of the Advanced Supersonic Parachute Inflation Research Experiment Sounding Rocket Flight Test

The Advanced Supersonic Parachute Inflation Research and Experiments project is a flight test program for development of supersonic parachutes for potential future use at Mars. The flight tests are designed to reduce risk for the Mars 2020 mission. The flight tests involve two Disk-Gap-Band parachute designs to be tested at relevant Mach number and dynamic pressure conditions for the Mars 2020 entry capsule. The first of these parachutes is a built-to-print design that was successfully employed by the Mars Science Laboratory lander at Mars in August 2012, and the second is a design that is strengthened in material properties and construction methods but has the same geometry as that used by Mars Science Laboratory. The first flight test of the built-to-print parachute took place on October 4, 2017 at NASA's Wallops Flight Facility. This paper describes the instrumentation, data analysis techniques, and atmospheric and trajectory reconstruction results from this flight test.

Karlgaard, Christopher D.↗

NASA NTRS2018

ASPIRE Aerodynamic Models and Flight Performance

NASA's Advanced Supersonic Parachute Inflation Research Experiments (ASPIRE) project was established to test full-scale supersonic parachutes at Mars-relevant conditions, as a risk-reduction activity for NASA's upcomingMars2020 mission. Deployment and inflation of Disk-Gap-Band (DGB) parachutes were examined at Mach number and dynamic pressure conditions relevant to Mars2020, using a sounding rocket platform. The flight tests examined two parachutes: a build-to-print version of the parachute used by the Mars Science Laboratory and a strengthened version of this parachute that has the same geometry but differs in materials and construction. The first flight test (SR01) of the built-to-print parachute took place on October 4, 2017, followed by the first test of the strengthened parachute during flight SR02 on March 31, 2018. A second test of the strengthened parachute with a higher target load, SR03, took place on September 7, 2018. Over the sequence of the three tests, the parachute was exposed to increasing aerodynamic loads with the peak load during SR03 being significantly larger than is expected during a Martian descent. All three tests were successful: the parachute deployment and inflation occurred at the intended conditions, the measurement systems performed as designed and provided the data, and the parachutes survived the aerodynamic loads they were exposed to. The flight tests yielded valuable data on parachute forces and high-speed imagery of the deployment and inflation process.

Parachute↗

NASA NTRS2017

The ASPIRE Project

UNKNOWN

O'Farrell, Clara↗