LANSCE Experimental Updates II: Neutron Scattering at WNR
Explore the source record for details and available documents.
Kelly, Keegan John↗
Engineering topics
O'Donnell, John M.
Publications and source records attributed to O'Donnell, John M..
Accessing a P-27 Data Acquisition Computer from an Off-Site Computer Not Owned by LANL
The steps to access a LANL owned P-27 data acquisition (DAQ) computer from off site using a non-LANL computer are documented here. Two connection paths should be possible. The first uses an HTML5 connection directly from portal.lanl.gov, and the steps for this path follow some preliminaries. The second connection path again uses an HTML5 from connection to portal.lan.gov to a virtual Windows desktop to then access our DAQ computers. Instructions for this will be added later.
97 MATHEMATICS AND COMPUTING↗
Experiments with neutron induced neutron emission from U-235, Pu-239, and graphite
A neutron induced neutron emission experiment was conducted as the Los Alamos Neutron Science Center (LANSCE) facility at Los Alamos National Laboratory (LANL). In this experiment, a sample was placed in a well collimated neutron beam and was surrounded by an array of 28 fast neutron detectors (EJ-309). The experiment was performed with a neutron flight path of 21.5 m from the source to the sample, and 1 m from the sample to the detectors. The neutron emission from the sample was measured as a function of neutron time of flight covering an incident energy range from 0.7- 20 MeV. The samples included U-235, Pu-239, carbon (graphite), and blanks that matched the encapsulation of the sample. The measured samples were constantly cycled in and out of the neutron beam. This type of experiment measures neutron emission from all reactions occurring in the sample such as fission and elastic and inelastic scattering. Similar to the methodology previously developed at RPI, the measurements were compared with detailed simulations of the experiment using different cross section evaluations for the sample. The observed differences can be attributed to the evaluated neutron cross section and angular distributions. The carbon sample was used as a reference to validate both the experiment and simulation methodology and showed good agreement between experiments and simulations. A review of the experimental setup, analysis methods, and some of the results will be presented.
73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
Late Prompt Fission Gamma Rays from 235 U(n,f) and 252 Cf(sf)
Two measurements of fission γ rays were performed with the DANCE and NEUANCE arrays using the reactions 235 U(n, f) and 252 Cf(sf). Utilizing the fast time response of the detectors and a method for estimating the accidental background, we obtained the energy spectrum of the late prompt fission γ rays as a function of the time since fission. The experimental results are compared with predictions of the code CGMF folded with GEANT4 simulations of the detector response.
72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
Measured Energy-Dependent Neutron Attenuation Through the Stacked Printed Circuit Boards
Engineers often stack printed circuit boards (PCBs), populated with semiconductor devices, one behind the other in neutron beams to improve the error statistics in radiation-effects tests. As the neutron beam traverses through the boards, the neutron flux is both attenuated and the energy spectrum changes, which may have a significant impact on the results of such tests. In this work, we have developed a technique to measure the energy-dependent neutron attenuation due to the PCBs and to determine the energy-dependent effective cross section of neutron interactions with a single PCB. With this effective cross section, engineers can calculate the change in the neutron energy spectrum and the total neutron attenuation after any number of identical PCBs in the stack. This information will allow test engineers to partially correct inaccuracies in soft error tests.
42 ENGINEERING↗