Engineering Papers⌕ Search

Engineering topics

Novosad, Valentyn

Publications and source records attributed to Novosad, Valentyn.

15 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Advances in coherent coupling between magnons and acoustic phonons

The interaction between magnetic and acoustic excitations have recently inspired many interdisciplinary studies ranging from fundamental physics to circuit implementation. Specifically, the exploration of their coherent interconversion enabled via the magnetoelastic coupling opens a new playground combining straintronics and spintronics, and provides a unique platform for building up on-chip coherent information processing networks with miniaturized magnonic and acoustic devices. In this Perspective, we will focus on the recent progress of magnon-phonon coupled dynamic systems, including materials, circuits, imaging and new physics. In particular, we highlight the unique features such as nonreciprocal acoustic wave propagation and strong coupling between magnons and phonons in magnetic thin-film systems, which provides a unique platform for their coherent manipulation and transduction. We will also review the frontier of surface acoustic wave resonators in coherent quantum transduction and discuss how the novel acoustic circuit design can be applied in microwave spintronics.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Phase-resolved electrical detection of coherently coupled magnonic devices

We demonstrate the electrical detection of magnon-magnon hybrid dynamics in yttrium iron garnet/Permalloy (YIG/Py) thin film bilayer devices. Direct microwave current injection through the conductive Py layer excites the hybrid dynamics consisting of the uniform mode of Py and the first standing spin wave (n=1) mode of YIG, which are coupled via interfacial exchange. Both the two hybrid modes, with Py- or YIG-dominated excitations, can be detected via the spin rectification signals from the conductive Py layer, providing phase resolution of the coupled dynamics. The phase characterization is also applied to a nonlocally excited Py device, revealing the additional phase shift due to the perpendicular Oersted field. Our results provide a device platform for exploring hybrid magnonic dynamics and probing their phases, which are crucial for implementing coherent information processing with magnon excitations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Temperature-dependent collective magnetization reversal in a network of ferromagnetic nanowires

The collective behavior of geometrically frustrated magnetization in connected networks of ferromagnetic nanowires, known as artificial spin ice, leads to complex magnetotransport behavior in those structures. Here, we present temperature- and current-dependent magnetotransport studies on a connected square artificial spin-ice system and correlate our observations to micromagnetic simulations. We find that the field at which the lattice magnetization collectively switches increases as the temperature is lowered. Our experimental findings highlight the importance of the global and local temperatures for the onset of a collective magnetization reversal in the connected system. These studies may also provide useful insights into novel storage concepts and applications in neuromorphic computing.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Spin-Wave Frequency Division Multiplexing in an Yttrium Iron Garnet Microstripe Magnetized by Inhomogeneous Field.

Spin waves are promising candidates for information processing and transmission in a broad frequency range. In the realization of magnonic devices, the frequency related division of the spin waves is a critical function for parallel information processing. In this work, we demonstrate a proof-of-concept spin-wave frequency division multiplexing method by magnetizing a homogeneous magnetic microstripe with an inhomogeneous field. The symmetry breaking additional field is introduced by a Permalloy stripe simply placed in lateral proximity to an yttrium iron garnet waveguide. Spin waves with different frequencies can propagate independently, simultaneously, and separately in space along the shared waveguide. This work demonstrates one potential way for parallel information transmission and processing in magnonics.

Zhang, Zhizhi↗
DOE OSTI2019

Low-loss single-photon NbN microwave resonators on Si

We present coplanar waveguide (CPW) microwave resonators with exceptionally low loss produced from NbN sputtered on Si. The NbN films are deposited with a modest RF substrate bias during reactive DC magnetron sputtering at a substrate temperature of 250 °C and can achieve a critical temperature as high as 15 K depending on the N2 flow rate. We measure the internal quality factors (Qi) of two such resonators at high-powers near saturation and report high-power quality factors in excess of 1.2 × 106 at 200 mK and 3.5 × 105 at 2 K. We also measure the temperature-dependent frequency shift at high power levels and the quality factor at single-photon power levels. From these measurements, we find a low-power (average photon number less than one) Qi value of 4.2 × 105 at 200 mK, which is consistent with a system limited by two-level-system loss.

Carter, Faustin W. (ORCID:0000000212363517)↗
DOE OSTI2019

Quantitative magnetic force microscopy using calibration on superconducting flux quanta

We present a new procedure that takes advantage of the magnetic flux quantization of superconducting vortices to calibrate the magnetic properties of tips for magnetic force microscopy (MFM). Indeed, a superconducting vortex, whose quantized flux is dependent upon Plank constant, speed of light and electron charge, behaves as a very well defined magnetic reference object. The proposed calibration procedure has been tested on new and worn tips and shows that the monopole point-like approximation of the probe is a reliable model. This procedure has been then applied to perform quantitative MFM experiments on a soft ferromagnetic thin film of permalloy, leading to the determination of the local out-of-plane component of the canted magnetization, together with its spatial variations across a few μm 2 scan area.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2018

Nontrivial Nature and Penetration Depth of Topological Surface States in SmB 6 Thin Films

The nontrivial feature and penetration depth of the topological surface states (TSS) in SmB 6 were studied via spin pumping. The experiments used SmB 6 thin films grown on the bulk magnetic insulator Y 3 Fe 5 O 12 (YIG). Upon the excitation of magnetization precession in the YIG, a spin current is generated in the SmB 6 that produces, via spin--orbit coupling, a lateral electrical voltage in the film. This spin-pumping voltage signal becomes considerably stronger as the temperature decreases from 150 to 10 K, and such an enhancement most likely originates from the spin-momentum locking of the TSS and may thereby serve as evidence for the nontrivial nature of the TSS. The voltage data also show a unique film thickness dependence that suggests a TSS depth of ~32 nm. Finally, the spin--pumping results arc supported by transport measurements and analyses using a tight binding model.

36 MATERIALS SCIENCE↗
DOE OSTI2018

Gold Nanoparticles-enabled Efficient Dual Delivery of Anticancer Therapeutics to HeLa Cells

Colloidal gold nanoparticles (AuNPs) are of interest as non-toxic carriers for drug delivery owing to their advanced properties, such as extensive surface-to-volume ratio and possibilities for tailoring their charge, hydrophilicity and functionality through surface chemistries. To date, various biocompatible polymers have been used for surface decoration of AuNPs to enhance their stability, payloads capacity and cellular uptake. This study describes a facile one-step method to synthesize stable AuNPs loaded with combination of two anticancer therapeutics, -bleomycin and doxorubicin. Anticancer activities, cytotoxicity, uptake and intracellular localization of the AuNPs were demonstrated in HeLa cells. We show that the therapeutic efficacy of the nanohybrid drug was strongly enhanced by the active targeting by the nanoscale delivery system to HeLa cells with a significant decrease of the half-maximal effective drug concentration, through blockage of HeLa cancer cell cycle. These results provide rationale for further progress of AuNPs-assisted combination chemotherapy using two drugs at optimized effective concentrations which act via different mechanisms thus decreasing possibilities of development of the cancer drug resistance, reduction of systemic drug toxicity and improvement of outcomes of chemotherapy.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2017

Cell-Free Synthetic Biology Chassis for Nanocatalytic Photon-to-Hydrogen Conversion

We report on entirely man-made nanobio hybrid fabricated through assembly of cell-free expressed transmembrane proton pump and semiconductor nanoparticles as an efficient nanocatalysis for photocatalytic H 2 evolution. The system produces H 2 at a turnover rate of 239 (μmole protein) -1 h -1 under green and 17742 (μmole protein) -1 h -1 under white light at ambient conditions, in water at neutral pH with methanol as a sacrificial electron donor. Robustness and flexibility of this approach allows for systemic manipulation at nanoparticle-bio interface toward directed evolution of energy transformation materials and artificial systems.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2017

Modeling Iridium-Based Trilayer and Bilayer Transition-Edge Sensors

Here, we report a model that can be used to calculate superconducting transition temperature of a transition-edge sensor (TES), which is either a normal metal-superconductor-normal metal trilayer or a normal metal-superconductor bilayer. The model allows the T C estimation of a trilayer when the normal metals at the bottom and at the top are different. Furthermore, the model includes the spin flip time of the normal metals. We also use the T C calculations from this model for selected Ir-based trilayers and bilayers to help understand potential designs of low T C TESs. A Au/Ir/Au trilayer can have a low T C because the superconducting order parameter is reduced with normal metals at both sides. On the other hand, an Ir/Pt bilayer can have a low T C because the much larger electron density of states of Pt reduces the superconducting order parameter more effectively. Moreover, the spin flip scattering of paramagnetic Pt also contributes to the T C reduction.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2016

scraps: An open-source Python-based analysis package for analyzing and plotting superconducting resonator data

We present "scraps" (SuperConducting Analysis and Plotting Software), a Python package designed to aid in the analysis and visualization of large amounts of superconducting resonator data, specifically complex transmission as a function of frequency, acquired at many different temperatures and driving powers. The package includes a least-squares fitting engine as well as a Monte-Carlo Markov Chain sampler for sampling the posterior distribution given priors, marginalizing over nuisance parameters, and estimating covariances. A set of plotting tools for generating publication-quality figures is also provided in the package. Lastly, we discuss the functionality of the software and provide some examples of its utility on data collected from a niobium-nitride coplanar waveguide resonator fabricated at Argonne National Laboratory.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2016

Large arrays of dual-polarized multichroic TES detectors for CMB measurements with the SPT-3G receiver

Now, detectors for cosmic microwave background (CMB) experiments are background limited, so a straightforward alternative to improve sensitivity is to increase the number of detectors. Large arrays of multichroic pixels constitute an economical approach to increasing the number of detectors within a given focal plane area. We present the fabrication of large arrays of dual-polarized multichroic transition-edge-sensor (TES) bolometers for the South Pole Telescope third-generation CMB receiver (SPT-3G). The complete SPT-3G receiver will have 2690 pixels, each with six detectors, allowing for individual measurement of three spectral bands (centered at 95 GHz, 150 GHz and 220 GHz) in two orthogonal polarizations. In total, the SPT-3G focal plane will have 16140 detectors. Each pixel is comprised of a broad-band sinuous antenna coupled to a niobium microstrip transmission line. In-line filters are used to define the different band-passes before the millimeter-wavelength signal is fed to the respective Ti/Au TES sensors. Detectors are read out using a 64x frequency domain multiplexing (fMux) scheme. The microfabrication of the SPT-3G detector arrays involves a total of 18 processes, including 13 lithography steps. Together with the fabrication process, the effect of processing on the Ti/Au TES's T-c is discussed. In addition, detectors fabricated with Ti/Au TES films with Tc between 400 mK 560 mK are presented and their thermal characteristics are evaluated. Optical characterization of the arrays is presented as well, indicating that the response of the detectors is in good agreement with the design values for all three spectral bands (95 GHz, 150 GHz, and 220 GHz). The measured optical efficiency of the detectors is between 0.3 and 0.8. Our results discussed here are extracted from a batch of research of development wafers used to develop the baseline process for the fabrication of the arrays of detectors to be deployed with the SPT-3G receiver. Results from these research and development wafers have been incorporated into the fabrication process to get the baseline fabrication process presented here. SPT-3G is scheduled to deploy to the South Pole Telescope in late 2016.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2016

Gyrotropic frequency control in ferromagnetic dots using a nanoscale vortex barrier

The vortex translational mode frequency is known to be only weakly dependent on the magnitude of an in-plane magnetic field (e.g. the vortex core position) for circular ferromagnetic dots. Here we demonstrated that the frequency-field dependence becomes discrete when a nanoscale vortex barrier is introduced in the dot structure. We found that the frequency is mostly defined by the outer diameter of the dot or the barrier size for the vortex core located outside or inside the barrier, correspondingly. The experimental results are in good agreement with the micromagnetic simulation.

Ding, Junjia↗
DOE OSTI2014

Dynamic control of spin states in interacting magnetic elements

A method for the control of the magnetic states of interacting magnetic elements comprising providing a magnetic structure with a plurality of interacting magnetic elements. The magnetic structure comprises a plurality of magnetic states based on the state of each interacting magnetic element. The desired magnetic state of the magnetic structure is determined. The active resonance frequency and amplitude curve of the desired magnetic state is determined. Each magnetic element of the magnetic structure is then subjected to an alternating magnetic field or electrical current having a frequency and amplitude below the active resonance frequency and amplitude curve of said desired magnetic state and above the active resonance frequency and amplitude curve of the current state of the magnetic structure until the magnetic state of the magnetic structure is at the desired magnetic state.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗